Greedfall

The Intel Core i3-12100F and NVIDIA GeForce RTX 5060 combination delivers a solid 1080p and 1440p experience in Greedfall, with 4K requiring a settings compromise. This pairing places the CPU in the 68th percentile of all processors and the GPU in the 72nd percentile of all graphics cards, indicating a balanced mid-range setup. Benchmark data confirms the system is measured, not estimated, providing concrete performance figures across three resolutions and four quality presets.

Similar Performance Alternatives

For the Intel Core i3-12100F, the nearest rivals by average benchmark score show a tightly clustered group. The Intel Core 3 N355 matches the i3-12100F almost exactly with a deltaPct of 0, making it a direct substitute in terms of raw compute. The Intel Core i5-9500 trails by just 0.3 percent, meaning users moving between these two processors would see virtually identical frame rates in CPU-bound scenarios. The Intel Core 5 120UL leads the i3-12100F by 0.7 percent, while the Intel Core i7-1250U sits 1.1 percent behind; all four alternatives fall within a 1.8 percent performance band, so any of them would behave similarly for Greedfall’s CPU load.

On the GPU side, the RTX 5060’s nearest rivals are even closer in aggregate score. The AMD Radeon 860M and NVIDIA GeForce MX550 both post scores within 0.3 percent of the RTX 5060, making them the most comparable alternatives for frame rate expectations. The AMD Radeon RX 5700 XT 50th Anniversary is 0.8 percent faster, and the AMD Radeon RX 6750 XT sits 1.2 percent behind. The deltaPct values here are small enough that none of these cards would create a perceptible difference in Greedfall’s average FPS; the RTX 5060’s 8 GB of GDDR7 memory and 448.0 GB/s bandwidth do not appear to give it a decisive edge in this title’s benchmark suite.

Best Settings per Resolution

At 1920x1080, the system clears the 60 FPS threshold at every preset, but the most demanding setting that remains playable is Ultra, which delivers an average of 88.9 FPS. This is the clear recommendation for full HD, as it provides a substantial 28.9 FPS margin above the playable threshold while using the highest quality assets.

Moving to 2560x1440, the Ultra preset still holds above 60 FPS with an average of 62.7 FPS. This is the best settings choice for QHD, though the margin shrinks to just 2.7 FPS, meaning any background load could theoretically dip closer to the threshold. The High preset at 96.3 FPS and Medium at 105.7 FPS offer more headroom, but Ultra remains technically playable per the data.

At 3840x2160, Ultra falls to 36.4 FPS and High drops to 53.6 FPS, both below the 60 FPS bar. Medium is the highest playable preset, averaging 62.5 FPS, which is a razor-thin 2.5 FPS above the threshold. Low runs at 76.9 FPS, providing a more comfortable margin for 4K gaming. The verdict data confirms Medium as the best 4K setting, but users prioritizing smoothness over fidelity may prefer Low.

CPU and GPU Roles

The scaling between resolutions and presets reveals how the workload shifts between the Core i3-12100F and RTX 5060. At 1080p, the CPU has more relative influence because the GPU is not saturated; the jump from Low to Ultra costs 100.3 FPS (189.2 down to 88.9), a 53 percent drop that indicates the GPU is the primary limiter even at the lowest preset. The CPU’s 4 cores and 8 threads, with a 3.30 GHz base and 4.30 GHz boost clock, appear sufficient to feed the GPU at 1080p since even Low exceeds 180 FPS.

At 1440p, the GPU bottleneck becomes more pronounced. The spread from Low (134.7 FPS) to Ultra (62.7 FPS) is 72 FPS, a smaller absolute delta than at 1080p, showing that the RTX 5060’s rendering load is growing while the CPU’s contribution stays constant. The fact that Ultra still clears 60 FPS at 1440p suggests the CPU is not holding the GPU back at this resolution.

At 4K, the GPU dominates entirely. The difference between Low (76.9 FPS) and Medium (62.5 FPS) is 14.4 FPS, while High (53.6 FPS) and Ultra (36.4 FPS) fall further behind. The 40.5 FPS gap between Low and Ultra at 4K is proportionally smaller than at 1080p, confirming that the RTX 5060’s 19.18 TFLOPS compute and 448.0 GB/s memory bandwidth are the decisive factors. The CPU’s role diminishes as resolution increases; its 12 MB of shared L3 cache and dual-channel memory support are adequate for feeding the GPU at 1080p and 1440p, but the GPU’s pixel rate of 119.9 GPixel/s becomes the limiting factor at 4K.

The Verdict

This PC can run Greedfall, but the experience varies sharply by resolution. At 1920x1080, every preset from Low to Ultra averages above 60 FPS, with Ultra hitting 88.9 FPS; this is a fully playable configuration with no compromises required. At 2560x1440, Ultra also clears the bar at 62.7 FPS, making QHD a viable target for maximum quality, though the margin is thin enough that High (96.3 FPS) is the safer choice for sustained performance. At 3840x2160, Ultra (36.4 FPS) and High (53.6 FPS) are unplayable, but Medium (62.5 FPS) and Low (76.9 FPS) both exceed 60 FPS, so 4K gaming is possible with reduced settings. The verdict data explicitly lists Low and Medium as playable at 4K, all four presets as playable at 1440p, and all four presets as playable at 1080p. The system’s weakest showing is 4K Ultra, which falls 23.6 FPS short of the threshold.

FAQ

Q: Can this PC run Greedfall at 1080p with maximum settings?

A: Yes. At 1920x1080 with Ultra settings, the measured average FPS is 88.9, which clears the 60 FPS playable threshold by a wide margin.

Q: What is the best 4K setting for this hardware?

A: Medium is the highest playable preset at 3840x2160, averaging 62.5 FPS. Low runs at 76.9 FPS for a more comfortable margin, while High (53.6 FPS) and Ultra (36.4 FPS) fall below 60 FPS.

Q: How does the RTX 5060 compare to its closest GPU rivals?

A: The RTX 5060’s average benchmark score is 26331. The AMD Radeon 860M is 0.3 percent faster, the NVIDIA GeForce MX550 is 0.3 percent faster, and the AMD Radeon RX 5700 XT 50th Anniversary is 0.8 percent faster. The AMD Radeon RX 6750 XT is 1.2 percent slower.

Q: Is the Core i3-12100F a bottleneck at 1440p?

A: No. At 2560x1440, the Ultra preset still achieves 62.7 FPS, and High runs at 96.3 FPS. The CPU’s 4 cores and 8 threads are sufficient to keep the GPU fed at this resolution.

Q: What frame rate does the system achieve at 1080p Low?

A: The measured average is 189.2 FPS, which is the highest FPS recorded across all tested resolutions and presets.

Q: How much performance is lost going from 1080p Ultra to 4K Ultra?

A: The 1080p Ultra average is 88.9 FPS, while 4K Ultra drops to 36.4 FPS, a difference of 52.5 FPS or approximately 59 percent lower performance.

How This Combo Ranks

Among the 3,703 tested combinations in the Greedfall benchmark database, this Intel Core i3-12100F and NVIDIA GeForce RTX 5060 pairing ranks 1,688th. This places it just below the midpoint of all tested systems, indicating that while it is not a top-tier configuration, it outperforms a majority of the field. The percentile rankings for the individual components—68th for the CPU and 72nd for the GPU—suggest the combo is slightly GPU-leaning, which aligns with the measured FPS results showing the RTX 5060 as the primary driver of frame rates at higher resolutions. The rank of 1,688 out of 3,703 means roughly 45 percent of tested combos are faster, but the data shows this system still delivers playable performance at all three resolutions with the right settings. For a 4-core processor paired with a 50-series GPU, the results are consistent with expectations; the CPU’s 68th percentile score does not prevent the GPU from reaching its potential in this title, as evidenced by the 1080p Ultra result of 88.9 FPS.