Instant compatibility check with FPS benchmarks and optimization tips
Greedfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 38 | 60 | 66 | 84 |
| 1440p QHD | 64 | 101 | 111 | 141 |
| 1080p Full HD | 93 | 146 | 160 | 204 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Greedfall on Your System
The AMD Ryzen 7 9700F and NVIDIA GeForce RTX 3070 combination delivers a robust Greedfall experience across all tested resolutions, with the data showing playable frame rates at every preset up to 2560x1440 and a clear ceiling at 4K where Ultra settings fall below the 60 FPS threshold. This pairing, ranked 1584 out of 3703 tested combos, demonstrates that the RTX 3070 remains a capable 1440p performer for this 2019 Action RPG, while the Ryzen 7 9700F’s strong single-thread performance ensures the CPU never becomes the limiting factor at lower resolutions.
Measured FPS Breakdown
At 1920x1080, the combination produces exceptionally high frame rates that leave substantial headroom for high-refresh-rate displays. Low settings deliver an average of 204 FPS, while Medium settings reach 160 FPS with a minimum of 136 FPS and a maximum of 184 FPS. High settings maintain a strong 146 FPS average, and even the most demanding Ultra preset achieves 93 FPS. The scaling from Low to Ultra at 1080p shows a drop of 111 FPS, indicating that the GPU is the primary driver of performance differences, with the CPU providing sufficient throughput to avoid bottlenecking at even the lowest settings.
Moving to 2560x1440, the frame rates remain comfortably above the 60 FPS playable threshold across all presets. Low settings produce 141 FPS on average, Medium settings deliver 111 FPS with a documented range of 94 to 128 FPS, and High settings reach 101 FPS. Ultra settings still manage a solid 64 FPS average, making 1440p a fully playable resolution for this game regardless of quality preference. The transition from 1080p to 1440p reduces performance by approximately 30% at each preset level, reflecting the increased pixel workload handled by the RTX 3070’s 448.0 GB/s memory bandwidth and 20.31 TFLOPS of FP32 compute.
At 3840x2160, the picture becomes more nuanced. Low settings achieve an 84 FPS average, Medium settings deliver 66 FPS with a minimum of 56 FPS and a maximum of 76 FPS, and High settings sit exactly at 60 FPS. Ultra settings, however, fall to 38 FPS, a 37% reduction from High and clearly below the playable threshold. The 8 GB GDDR6 memory capacity and 256-bit bus width show their limits at this resolution, where the combination of pixel count and texture complexity overwhelms the GPU’s resources. The data indicates that 4K gaming is viable only up to High settings, and even then, the 60 FPS average leaves no margin for demanding scenes.
FAQ
Q: Can this PC run Greedfall at 60 FPS on Ultra settings at 2560x1440?
A: Yes. The measured average FPS at 2560x1440 with Ultra settings is 64 FPS, which clears the 60 FPS playable threshold by a narrow margin.
Q: What is the best playable preset at 3840x2160?
A: High settings provide the best visual quality that remains playable, with an average of 60 FPS. Ultra settings at 4K drop to 38 FPS, which is below the playable threshold.
Q: How does the RTX 3070 perform at 1920x1080 with Medium settings?
A: The average frame rate is 160 FPS, with minimums of 136 FPS and maximums of 184 FPS, indicating consistently smooth performance well above the 60 FPS target.
Q: Is there a significant performance difference between Low and High settings at 2560x1440?
A: Yes, Low settings average 141 FPS while High settings average 101 FPS, a difference of 40 FPS. This represents a 28% performance reduction for improved visual fidelity.
Q: Which resolution shows the largest gap between Medium and Ultra settings?
A: At 3840x2160, Medium averages 66 FPS while Ultra drops to 38 FPS, a 28 FPS gap. This is the largest absolute difference between these presets across all resolutions.
Q: Does the CPU or GPU limit performance at 1920x1080 with Low settings?
A: The data shows 204 FPS at 1080p Low, and given the Ryzen 7 9700F’s PassMark single-thread score of 4691 and multithread score of 36470, the GPU is the limiting factor at this resolution and preset combination.
CPU and GPU Roles
The performance scaling across resolutions reveals a clear division of labor between the Ryzen 7 9700F and the RTX 3070. At 1920x1080, the frame rates of 146 to 204 FPS across presets suggest the GPU is the primary bottleneck, as the CPU’s 8 cores and 16 threads with a 5.50 GHz boost clock provide ample processing headroom. The 58 FPS difference between Low and High settings at 1080p is entirely attributable to GPU workload, with the RTX 3070’s shading units and texture rate of 317.4 GTexel/s handling the increased draw calls and shader complexity.
At 2560x1440, the CPU’s role diminishes further as the GPU becomes more saturated. The 40 FPS spread between Low and High settings at this resolution indicates that the RTX 3070’s rendering pipeline is the dominant factor, with the 141 FPS at Low settings still leaving the CPU with spare capacity. The 4K results reinforce this trend: the 46 FPS gap between Low and Ultra settings at 3840x2160 demonstrates that the GPU’s memory bandwidth of 448.0 GB/s and pixel rate of 165.6 GPixel/s are the decisive components, while the CPU’s Zen 5 architecture has no difficulty feeding the render pipeline.
The data also shows that the CPU’s influence is most visible at the lowest resolution and settings. At 1080p Low, the 204 FPS result approaches the practical ceiling for the RTX 3070, and any further performance gains would require a more powerful GPU. Conversely, at 4K Ultra, the 38 FPS result is purely GPU-bound, and the Ryzen 7 9700F’s PassMark scores indicate it could support a faster graphics card without becoming a limiting factor.
How This Combo Ranks
The combination of AMD Ryzen 7 9700F and NVIDIA GeForce RTX 3070 ranks 1584 out of 3703 tested combos in Greedfall, placing it in the upper half of all configurations evaluated. This ranking reflects the RTX 3070’s position in the GPU hierarchy, where it sits at the 61st percentile among all GPUs, while the CPU’s 94th percentile ranking among all CPUs shows that the processor is a high-end component relative to the graphics card.
The combo’s mid-pack ranking is consistent with its measured performance. At 1440p Ultra, the 64 FPS average places it ahead of many older or lower-tier GPU pairings, but the 4K Ultra result of 38 FPS reveals the limitations of the 8 GB VRAM and GA104 chip. The rank of 1584 suggests that roughly 43% of tested combos perform better, which aligns with the RTX 3070’s status as a previous-generation mid-range card rather than a flagship.
For context, the CPU’s nearest rivals include the AMD Ryzen 9 7940HX with an average score of 69875 (0.2% higher), the Intel Core i7-14700KF at 70163 (0.2% higher), and the AMD Ryzen 9 7950X at 69515 (0.7% lower). These comparisons indicate that the Ryzen 7 9700F is competitive with high-end desktop and mobile processors, and its performance in Greedfall is unlikely to differ meaningfully from these alternatives when paired with the same GPU.
Similar Performance Alternatives
Based on the nearest rivals data, several hardware combinations would deliver nearly identical performance in Greedfall. On the CPU side, the AMD Ryzen 9 7940HX with an average benchmark score of 69875 is within 0.2% of the Ryzen 7 9700F’s 69996 average, making it a direct substitute in gaming workloads. The Intel Core i7-14700KF scores 70163, which is 0.2% higher, while the AMD Ryzen 9 7950X scores 69515, 0.7% lower. All four processors should produce indistinguishable frame rates in this game when paired with the RTX 3070, as Greedfall’s CPU demands are well within the capabilities of any of these chips.
On the GPU side, the AMD Radeon RX 7600 XT has an average benchmark score of 17083, which is 0.7% lower than the RTX 3070’s 17208. The NVIDIA GeForce GTX 690 scores 17037 (1% lower), and the AMD Radeon HD 7970M scores 17019 (1.1% lower). The NVIDIA Tesla K40c scores 17468, 1.5% higher. These deltas are all within a narrow band, suggesting that the RTX 3070 and RX 7600 XT would produce nearly identical FPS in Greedfall, while the other listed GPUs are older or specialized hardware that may not support the same feature set.
For practical purposes, a system with an Intel Core i7-14700KF or AMD Ryzen 9 7950X and an AMD Radeon RX 7600 XT would behave almost identically to the tested configuration. The performance differences among these components are within measurement error, and users seeking similar gameplay experiences could expect matching frame rates at each resolution and preset combination.
The Verdict
This PC can run Greedfall comfortably at 1920x1080 and 2560x1440 across all presets, with the verdictByResolution data confirming that every settings level at these resolutions clears the 60 FPS playable threshold. At 3840x2160, the system remains playable on Low, Medium, and High settings, with High achieving exactly 60 FPS on average. The Ultra preset at 4K fails to reach playable performance, with a 38 FPS average that would result in noticeable stuttering and input lag.
For 1080p gaming, the combination is overqualified, with Ultra settings delivering 93 FPS and Low settings reaching 204 FPS. This headroom makes the system suitable for high-refresh-rate displays at 1440p, where even Ultra settings maintain 64 FPS. At 4K, users should stick to High settings or below to ensure consistent frame rates, and the Medium preset’s 66 FPS average with a 56 FPS minimum provides a safer margin for demanding scenes.
The system’s performance is well-balanced for this game, with the CPU’s high single-thread performance ensuring smooth frame pacing at high frame rates, and the GPU’s capabilities defining the upper limits at 4K. Users with 1440p monitors can enable Ultra settings without concern, while 4K users must make a quality trade-off to maintain playability.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 93 FPS. This provides the maximum visual quality available while still delivering a substantial margin above the playable threshold, making it the recommended choice for 1080p displays.
At 2560x1440, Ultra settings are again the best choice, achieving 64 FPS on average. While this is only 4 FPS above the 60 FPS threshold, the absence of reported minimum FPS data for this preset suggests consistent performance, and the visual benefits of Ultra outweigh the narrow margin.
At 3840x2160, High settings are the optimal choice, with an average of exactly 60 FPS. The Medium preset offers 66 FPS with a 56 FPS minimum, providing a more consistent experience for users who prioritize frame stability over visual fidelity. However, for users seeking the best image quality that remains playable, High settings are the designated best settings per the verdict data, and the 60 FPS average indicates the system can handle the workload under typical conditions.