Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Greedfall
Action RPG 2019

Greedfall

63%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
205 FPS
Ultra 1080p Measured
96 FPS

1440p (2K / QHD)

Low 1440p Measured
143 FPS
Ultra 1440p Measured
63 FPS

4K (Ultra HD)

Low 4K Measured
82 FPS
Ultra 4K Measured
36 FPS
6.8ms Frame Time
10ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,496
Your CPU 26,324
Graphics Card
Required 27,800
Your GPU 17,208

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 36 61 65 82
1440p QHD 63 103 111 143
1080p Full HD 96 146 158 205

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 146
1920x1080 Low 205
1920x1080 Medium 158
1920x1080 Ultra 96
2560x1440 High 103
2560x1440 Low 143
2560x1440 Medium 111
2560x1440 Ultra 63
3840x2160 High 61
3840x2160 Low 82
3840x2160 Medium 65
3840x2160 Ultra 36

Performance Analysis: Greedfall on Your System

The AMD Ryzen 5 7600 and NVIDIA GeForce RTX 3070 pairing delivers a strong performance profile for Greedfall, an Action RPG from 2019. The data shows this combo is capable of high frame rates across all common resolutions, with the primary limitation appearing only at 4K with Ultra settings. This is a balanced pairing where the GPU becomes the dominant factor at higher resolutions, while the CPU’s strong single-thread performance keeps 1080p frame rates exceptionally high.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which produces an average of 95.9 FPS. This is a clear headroom situation—the combo nearly doubles the 60 FPS threshold even at the highest graphical quality. Lower settings push performance dramatically higher: High averages 146.4 FPS, Medium reaches 158.3 FPS, and Low tops out at 205.1 FPS. For 1080p gaming, there is no practical reason to drop below Ultra unless targeting a very high refresh rate display, where Medium or Low would be the choices.

At 2560x1440, the best setting that remains at or above 60 FPS is also Ultra, with an average of 62.5 FPS. This is a much tighter margin—only 2.5 FPS above the playable threshold—so players who prefer a consistent buffer might opt for High instead, which delivers 103 FPS. Medium produces 111.3 FPS, and Low reaches 142.7 FPS. The 1440p Ultra result is the first point where the hardware starts to feel constrained, though it still technically clears the bar.

At 3840x2160, the situation changes. The most demanding playable preset is High, averaging 60.6 FPS. This is a razor-thin margin, just 0.6 FPS above the 60 FPS threshold. Medium is safer at 64.5 FPS, while Low jumps to 82.4 FPS. Ultra drops to 36.3 FPS, which is far below playable. For 4K, the data suggests High is the maximum setting, but the near-threshold result means Medium is the more reliable choice for sustained performance.

CPU and GPU Roles

The benchmark results across resolutions and presets reveal a clear division of labor. At 1920x1080, the frame rates scale almost entirely with GPU load—from 95.9 FPS at Ultra to 205.1 FPS at Low—indicating the RTX 3070 is the primary bottleneck. The Ryzen 5 7600, with its 6 cores and 12 threads, has ample headroom to feed the GPU at this resolution. The CPU’s Cinebench R23 multi-core score of 12735 and single-core score of 1852 suggest it is not limiting frame rates here.

As resolution increases to 2560x1440, the GPU’s role becomes more pronounced. The gap between Low (142.7 FPS) and Ultra (62.5 FPS) is larger in percentage terms than at 1080p, showing that pixel throughput is now the dominant factor. The CPU still has no trouble keeping up, as evidenced by the 1440p High result of 103 FPS, which is only slightly lower than the 1080p High result of 146.4 FPS—a 30% drop that is entirely attributable to GPU workload.

At 3840x2160, the GPU is the overwhelming constraint. The Ultra preset collapses to 36.3 FPS, while even High barely clears 60 FPS at 60.6 FPS. This 4K Ultra result is less than half the 1080p Ultra figure, confirming that the RTX 3070’s 8 GB GDDR6 memory and 448.0 GB/s bandwidth are being saturated. The CPU’s contribution is minimal here; reducing resolution from 4K to 1440p at the same settings yields a 70% frame rate increase, which is a GPU-bound scaling pattern.

How This Combo Ranks

In the database of tested combinations, this pairing ranks 1583rd out of 3703 combos for Greedfall. This places it in the upper-middle tier—roughly the 57th percentile of all tested systems. The rank reflects that the RTX 3070, while aging, still provides solid performance for a 2019 title, and the Ryzen 5 7600 is a modern CPU that avoids holding the GPU back.

The GPU’s percentile versus all GPUs is 61, meaning it outperforms 61% of tested graphics cards. The CPU’s percentile is higher at 78, indicating the processor is relatively stronger than the graphics card within this pairing. This asymmetry explains why the combo’s overall rank (57th percentile) sits between the two component percentiles—the weaker GPU drags the combined result down somewhat. For a game like Greedfall, which is not particularly demanding by modern standards, this rank is respectable but not outstanding.

Similar Performance Alternatives

Looking at the CPU’s nearest rivals, several processors would behave nearly identically in this system. The AMD Ryzen 9 6900HX has an average benchmark score of 26274, just 0.2% below the Ryzen 5 7600’s score of 26324. The AMD Ryzen 7 7435HS scores 26402, which is 0.3% higher. The Intel Core i9-11900KF scores 26212, a 0.4% difference, and the AMD Ryzen 5 8540U scores 26187, 0.5% lower. None of these would produce a meaningful change in Greedfall’s frame rates, as the game is not CPU-bound at any resolution tested. Swapping in any of these would likely yield frame rate differences of 1-2 FPS at most, well within measurement noise.

For the GPU, the nearest rivals are more mixed. The AMD Radeon RX 7600 XT scores 17083, which is 0.7% lower than the RTX 3070’s 17208. The NVIDIA GeForce GTX 690 scores 17037 (1% lower), and the AMD Radeon HD 7970M scores 17019 (1.1% lower). On the higher side, the NVIDIA Tesla K40c scores 17468, which is 1.5% above. These small deltas mean the RX 7600 XT would be the most logical alternative, offering nearly identical performance. The GTX 690 and HD 7970M are much older architectures and may lack modern driver optimizations, despite similar benchmark scores. The Tesla K40c is a compute-oriented card not intended for gaming, so it is not a practical alternative despite the score.

Measured FPS Breakdown

The full measured data set shows consistent scaling across resolutions and settings. At 1920x1080, the frame rates are: Low 205.1 FPS, Medium 158.3 FPS, High 146.4 FPS, and Ultra 95.9 FPS. The step from Ultra to High is a 53% increase, while the step from High to Medium is only 8%, suggesting diminishing returns at lower settings. The jump from Medium to Low is 30%, indicating that Low removes significant GPU load.

At 2560x1440, the results are: Low 142.7 FPS, Medium 111.3 FPS, High 103 FPS, and Ultra 62.5 FPS. The Ultra setting takes a 39% hit compared to High, which is the largest single-setting drop in this resolution. Notably, the difference between Medium and High is small (8%), similar to 1080p, but the difference between High and Ultra is much larger, showing that Ultra introduces effects that heavily tax the GPU.

At 3840x2160, the results are: Low 82.4 FPS, Medium 64.5 FPS, High 60.6 FPS, and Ultra 36.3 FPS. The Ultra preset is 40% below High, and even High only barely clears 60 FPS. Medium provides a comfortable 6.5% buffer over High, while Low offers a 36% improvement over Medium. The scaling from 1440p to 4K at the same settings is severe: High drops from 103 FPS to 60.6 FPS (41% reduction), and Ultra drops from 62.5 FPS to 36.3 FPS (42% reduction).

The Verdict

The data shows this PC can run Greedfall successfully at all three tested resolutions, but with important caveats. At 1920x1080, every preset—Low, Medium, High, and Ultra—clears the 60 FPS threshold comfortably. The best playable setting is Ultra at 95.9 FPS, which leaves substantial headroom for frame rate dips or background tasks.

At 2560x1440, all four presets also stay at or above 60 FPS. The best setting is Ultra at 62.5 FPS, though this is close to the threshold. Players who want a safety margin should consider High at 103 FPS, which is far more stable. The 1440p Ultra result is playable but not ideal for high-refresh-rate monitors.

At 3840x2160, the verdict is mixed. High, Medium, and Low all clear 60 FPS, with High at 60.6 FPS being the maximum quality option. However, this is a marginal pass—any demanding scene could push it below 60 FPS. Medium at 64.5 FPS is the recommended choice for consistent performance. Ultra is not playable at 36.3 FPS, so 4K Ultra should be avoided entirely.

Overall, this combo is best suited for 1080p and 1440p gaming, where it delivers excellent frame rates at maximum settings. For 4K, it is playable only at High or lower settings, and the near-threshold results suggest that players should favor Medium for a stable experience. The system’s rank of 1583 out of 3703 reflects a capable but not top-tier configuration—strong for 1440p, adequate for 4K, and excellent for 1080p.