Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Evolve
FPS 2015

Evolve

99%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
227 FPS
Ultra 1080p Measured
94 FPS

1440p (2K / QHD)

Low 1440p Measured
151 FPS
Ultra 1440p Measured
63 FPS

4K (Ultra HD)

Low 4K Measured
85 FPS
Ultra 4K Measured
38 FPS
7.3ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,482
Your CPU 79,097
Graphics Card
Required 27,876
Your GPU 29,945

Recommendations

Optimize Settings

Try lowering shadows and anti-aliasing for better FPS.

GPU Upgrade

A better graphics card would significantly improve performance.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 38 54 69 85
1440p QHD 63 93 121 151
1080p Full HD 94 137 173 227

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 137
1920x1080 Low 227
1920x1080 Medium 173
1920x1080 Ultra 94
2560x1440 High 93
2560x1440 Low 151
2560x1440 Medium 121
2560x1440 Ultra 63
3840x2160 High 54
3840x2160 Low 85
3840x2160 Medium 69
3840x2160 Ultra 38

Performance Analysis: Evolve on Your System

The Intel Core i9-14900K paired with the NVIDIA GeForce RTX 3070 Ti delivers a broad range of performance in Evolve, scaling from a highly playable 1080p experience to a more demanding 4K challenge. The measured data shows that this combination is capable of exceeding the 60 FPS threshold at every tested resolution, provided the right graphics presets are selected. At 1080p, the combo offers headroom for maximum visual fidelity, while at 4K, users must make more deliberate trade-offs between image quality and frame rate.

Measured FPS Breakdown

The benchmark results for Evolve provide a clear picture of how the Core i9-14900K and RTX 3070 Ti handle different rendering loads. The data shows a consistent pattern: frame rates scale predictably with both resolution and preset level, with the gap between Low and Ultra settings widening as resolution increases.

At 1920x1080, the combo is exceptionally strong. With Low settings, the average frame rate reaches 227.2 FPS, a figure that underscores the CPU’s ability to feed the GPU at lower resolutions. Moving to Medium settings drops the average to 173.4 FPS, while High settings still deliver a very smooth 137.4 FPS. The most demanding preset at this resolution, Ultra, maintains an average of 93.5 FPS, which is well above the playable threshold of 60 FPS. This indicates that even at maximum quality, there is substantial performance headroom for high-refresh-rate displays.

Stepping up to 2560x1440, the performance remains robust but shows the expected impact of increased pixel count. Low settings produce an average of 151.1 FPS, and Medium settings follow at 120.7 FPS. High settings still provide a comfortable 92.5 FPS average. The Ultra preset at this resolution yields 62.6 FPS, which is just above the 60 FPS playable threshold. This result is significant because it shows that the combo can handle maximum settings at 1440p, though with less margin for error than at 1080p.

At 3840x2160, the RTX 3070 Ti’s 8 GB of GDDR6X memory and 608.3 GB/s bandwidth are pushed harder. Low settings deliver an average of 84.6 FPS, which is still highly playable. Medium settings drop to 69 FPS, while High settings fall to 53.8 FPS, dipping below the 60 FPS threshold. The Ultra preset at 4K is the most demanding configuration tested, producing an average of only 37.8 FPS. This makes 4K Ultra impractical for smooth gameplay, but the data confirms that 4K Medium is a viable option for maintaining playable frame rates.

Similar Performance Alternatives

The nearest rival data for both the CPU and GPU provides context for how this specific combination compares to other hardware. For the Intel Core i9-14900K, the closest performance match is the Intel Core i9-14900KF, which shows a negligible deltaPct of -0.3%, meaning the two processors perform nearly identically in average benchmark scores. The Intel Core Ultra 9 290HX Plus is also very close, with a deltaPct of -0.6%, placing it just behind the i9-14900K. On the other side, the AMD EPYC 7413 scores 1.2% higher, while the AMD Ryzen AI Max+ 395 trails by 1.7%. These small percentage differences indicate that users with any of these CPUs would see virtually the same frame rates in Evolve, assuming the GPU remains the same.

On the GPU side, the NVIDIA GeForce RTX 3070 Ti’s nearest rival is the NVIDIA GeForce RTX 5070 Mobile, which scores 0.1% higher in average benchmarks. The AMD Radeon RX 6800 is 0.5% behind, while the NVIDIA GeForce RTX 2080 Ti is 0.5% ahead. The AMD Radeon RX 6700 is the furthest behind at 1.6%. These deltaPct values are all under 2%, meaning that swapping the RTX 3070 Ti for any of these alternatives would produce very similar FPS results in Evolve. For example, a system with a Core i9-14900K and an RX 6800 would likely deliver frame rates within a few percent of what this combo achieves, making them viable substitutes for users seeking comparable performance.

CPU and GPU Roles

The scaling of frame rates across resolutions and presets reveals a clear division of labor between the Core i9-14900K and the RTX 3070 Ti. At 1920x1080, the CPU plays a more prominent role, as evidenced by the high frame rates at Low settings (227.2 FPS). This score suggests that the i9-14900K, with its 24 cores and 32 threads, is capable of feeding the GPU with enough data to saturate its capabilities at lower resolutions. However, as settings increase to Ultra, the average frame rate drops to 93.5 FPS, a 58.8% reduction from Low. This indicates that the GPU begins to become the limiting factor as the rendering workload increases.

At 2560x1440, the GPU’s influence grows. The frame rate at Low settings drops to 151.1 FPS, and at Ultra it falls to 62.6 FPS. The relative drop from Low to Ultra is 58.6%, which is nearly identical to the 1080p scaling. This suggests that the balance between CPU and GPU remains consistent at these two resolutions, with the GPU taking on more responsibility for the heavier presets.

At 3840x2160, the GPU becomes the dominant bottleneck. The frame rate at Low settings is 84.6 FPS, and at Ultra it plummets to 37.8 FPS. The drop from Low to Ultra is 55.3%, which is slightly less than at lower resolutions. However, the absolute frame rates are much lower, indicating that the RTX 3070 Ti is struggling to keep up with the pixel throughput required at 4K. The CPU’s role diminishes significantly at this resolution, as the GPU’s rendering capacity becomes the primary constraint. The data shows that the i9-14900K provides ample headroom even at 4K, but the RTX 3070 Ti simply cannot maintain high frame rates under the most demanding settings.

The Verdict

The benchmark data confirms that this PC can run Evolve at all tested resolutions, though the playable settings vary. At 3840x2160, the verdict indicates that Low and Medium settings are playable, with Medium achieving an average of 69 FPS. High and Ultra settings fall below the 60 FPS threshold, making them unsuitable for smooth gameplay. At 2560x1440, all four presets are playable, with Ultra delivering 62.6 FPS and High providing a more comfortable 92.5 FPS. At 1920x1080, every preset clears the 60 FPS bar, with Ultra reaching 93.5 FPS and Low exceeding 200 FPS.

In practical terms, this means the system is fully capable of delivering a smooth experience at 1080p and 1440p with maximum settings. For 4K, users should stick to Medium settings to maintain playable frame rates, or drop to Low for a higher margin of safety. The data does not include minimum or maximum frame rates, so the analysis relies solely on average values, but the consistency of the results suggests a stable performance profile.

FAQ

*Q: Can this PC run Evolve at 4K with High settings?*

A: No. The measured average frame rate at 3840x2160 with High settings is 53.8 FPS, which is below the 60 FPS playable threshold.

Q: What is the highest quality preset that maintains 60 FPS at 2560x1440?

A: Ultra settings at 2560x1440 produce an average of 62.6 FPS, which is the highest preset tested that stays above the 60 FPS threshold.

Q: How does the RTX 3070 Ti compare to the RTX 2080 Ti in this benchmark context?

A: The RTX 3070 Ti has an average benchmark score that is 0.5% lower than the RTX 2080 Ti, indicating nearly identical performance in Evolve.

Q: Is the Core i9-14900K a bottleneck for the RTX 3070 Ti at 1080p?

A: The data shows that at 1080p Low settings, the combo reaches 227.2 FPS, suggesting the CPU provides sufficient headroom. The frame rate drops to 93.5 FPS at Ultra, indicating the GPU becomes the limiting factor.

Q: What is the best preset for 4K gaming on this system?

A: Medium settings at 3840x2160 deliver an average of 69 FPS, which is the most demanding preset that stays above the 60 FPS threshold.

*Q: How does this combo rank among all tested systems for Evolve?*

A: The combo ranks 1323rd out of 3700 tested combinations, placing it in the upper portion of the database.

How This Combo Ranks

In the database of tested hardware combinations for Evolve, the Intel Core i9-14900K and NVIDIA GeForce RTX 3070 Ti occupy the 1323rd position out of 3700 total combos. This ranking places the system in the 64th percentile, meaning it outperforms roughly two-thirds of all tested configurations. The rank is influenced by the GPU’s percentileVsAllGpus of 75, which indicates the RTX 3070 Ti is stronger relative to other GPUs than the CPU is relative to other CPUs. The i9-14900K’s percentileVsAllCpus of 95 shows it is a top-tier processor, but the GPU’s mid-range positioning pulls the overall combo ranking down. This suggests the RTX 3070 Ti is the primary factor limiting the system’s standing, despite the CPU’s exceptional performance.

Best Settings per Resolution

For users seeking the highest visual quality while maintaining playable frame rates, the data identifies the optimal preset for each resolution. At 1920x1080, the best settings are Ultra, which produce an average of 93.5 FPS. This provides a significant margin above the 60 FPS threshold, making it the recommended choice for 1080p gaming. At 2560x1440, Ultra is also the best option, achieving 62.6 FPS. While this is just above the playable threshold, it offers the maximum visual fidelity available at that resolution. At 3840x2160, the best settings are Medium, which deliver an average of 69 FPS. This provides a comfortable buffer over the 60 FPS threshold while offering a balance between image quality and performance. Users who prioritize frame rate over visuals at 4K can opt for Low settings, which reach 84.6 FPS, but Medium represents the highest preset that meets the playability criterion.