Evolve

The Intel Core i7-14700KF and NVIDIA GeForce RTX 2060 combination delivers a wide range of performance in Evolve, a 2015 FPS title. The data shows that this pairing is highly dependent on resolution and quality settings, with the GPU acting as the primary bottleneck in most scenarios. Below is a detailed breakdown of the measured frame rates, system dynamics, and actionable conclusions.

Measured FPS Breakdown

At 1920x1080, the combo provides strong performance across all presets. At Low settings, the average frame rate reaches 146 FPS, providing a very fluid experience. Moving to Medium settings, the average drops to 113 FPS with a minimum of 96 FPS and a maximum of 130 FPS. High settings yield an average of 89 FPS. Even at the highest preset, Ultra, the average remains a solid 62 FPS.

At 2560x1440, performance remains playable but requires more careful selection of settings. Low settings produce an average of 98 FPS. Medium settings deliver an average of 76 FPS, with a minimum of 65 FPS and a maximum of 87 FPS. High settings average exactly 60 FPS. Ultra settings, however, fall below the 60 FPS threshold with an average of 41 FPS.

At 3840x2160, the RTX 2060 struggles to maintain playable frame rates. Low settings average 56 FPS, just under the threshold. Medium settings average 43 FPS, with a minimum of 37 FPS and a maximum of 50 FPS. High settings average 34 FPS, and Ultra settings average only 23 FPS. No measured preset at 4K achieves an average of 60 FPS or higher.

CPU and GPU Roles

In Evolve, the role of the CPU versus the GPU shifts significantly depending on the chosen resolution and settings. The Intel Core i7-14700KF, with its 20 cores and 28 threads, is an extremely capable processor. However, the benchmark results indicate that the NVIDIA GeForce RTX 2060, with its 6 GB of GDDR6 memory and 192-bit bus, becomes the limiting factor as resolution increases.

Scaling from 1920x1080 to 2560x1440 at High settings shows a drop from 89 FPS to 60 FPS, a reduction of roughly 33%. This steep decline is characteristic of a GPU-bound scenario: the rendering load increases with pixel count, and the RTX 2060’s compute resources cannot keep pace with the CPU’s ability to feed it data. At 3840x2160 High, the average of 34 FPS represents a further 43% drop from the 1440p result, confirming that the GPU is the dominant constraint at higher resolutions.

At lower resolutions and settings, the CPU’s strength becomes more apparent. At 1920x1080 Low, the combination achieves 146 FPS, indicating that the i7-14700KF can easily drive the RTX 2060 to its maximum output. The difference between 1080p Low (146 FPS) and 1080p Ultra (62 FPS) is driven entirely by the GPU’s ability to handle the increased shader complexity and texture detail. The recorded minimum frame rates, such as 96 FPS at 1080p Medium and 65 FPS at 1440p Medium, suggest that frame time consistency is good when the GPU is not fully saturated; no severe stuttering from CPU bottlenecks is evident in the data.

How This Combo Ranks

Among all 3700 tested hardware combinations in the database for Evolve, the Intel Core i7-14700KF + RTX 2060 pairing ranks at position 2910. This places it in the lower half of the overall field, which is consistent with the RTX 2060 being an older, mid-range GPU paired with a very modern high-end CPU. The CPU itself ranks in the 94th percentile among all CPUs in the database, but the GPU ranks only in the 58th percentile. The combo’s rank is therefore heavily weighted by the GPU’s performance, as Evolve is a graphically demanding title at higher settings.

Similar Performance Alternatives

For the CPU, the nearest rivals to the Intel Core i7-14700KF include the AMD Ryzen 7 9700F, which has an average benchmark score of 69996 (a delta of 0.2% higher), and the AMD Ryzen 9 7940HX, with a score of 69875 (0.4% higher). The AMD Ryzen 9 7950X scores 69515, which is 0.9% lower. The Intel Core Ultra 7 265K scores 70879, which is 1% higher. Any of these processors would produce nearly identical frame rates in Evolve when paired with the same RTX 2060, as the GPU would remain the performance ceiling.

For the GPU, the RTX 2060’s nearest rivals are the NVIDIA GeForce GTX 580, which has an identical average benchmark score (15283, 0% delta), and the AMD Radeon 680M, which scores 15270 (0.1% higher). The NVIDIA GeForce RTX 3050 OEM scores 15199 (0.6% higher), and the AMD Radeon RX 7600 scores 15171 (0.8% higher). In practical terms for Evolve, any of these GPUs would deliver very similar average frame rates to the RTX 2060 at the same settings and resolutions.

Best Settings per Resolution

At 1920x1080, the best setting that stays at or above 60 FPS is Ultra, which achieves an average of 62 FPS. This allows for maximum visual quality while maintaining a playable experience.

At 2560x1440, the best setting that stays at or above 60 FPS is High, delivering an average of 60 FPS exactly. Medium and Low also exceed 60 FPS, but High offers higher visual fidelity within the playable threshold.

At 3840x2160, no measured setting reaches an average of 60 FPS. The closest is Low, which averages 56 FPS, but this is still below the 60 FPS playable threshold.

The Verdict

Can this PC run Evolve? Yes, but with important resolution-based limitations. According to the verdict data, the i7-14700KF and RTX 2060 combination is fully playable at 1920x1080, where all four presets (Low, Medium, High, Ultra) clear the 60 FPS threshold. The best visual experience at this resolution is Ultra, with an average of 62 FPS.

At 2560x1440, the system is playable on High, Medium, and Low settings. The best playable setting at this resolution is High, which averages exactly 60 FPS. Ultra at 1440p falls to 41 FPS and is not recommended.

At 3840x2160, the system is not capable of delivering a playable experience on any of the measured presets. The highest average frame rate recorded is 56 FPS on Low, which is below the 60 FPS threshold. Users attempting 4K gameplay on this hardware would need to significantly reduce resolution scaling or accept sub-60 FPS performance.

FAQ

Q: Will the Intel Core i7-14700KF bottleneck the RTX 2060 in Evolve?

A: No. The data shows that the GPU is the performance limiter at all resolutions above 1080p Low. The CPU is powerful enough to drive the RTX 2060 to its maximum potential in this game.

Q: Can I use ray tracing with the RTX 2060 in Evolve?

A: The RTX 2060 includes 30 RT cores and supports DirectX 12 Ultimate. However, the measured FPS data for Evolve does not include any ray tracing presets, so specific performance with ray tracing enabled is not available in this dataset.

Q: How does this combo compare to using a newer mid-range GPU like the RTX 3050 OEM?

A: The RTX 2060 and RTX 3050 OEM are very close in raw compute performance. Their average benchmark scores differ by only 0.6%, so you would expect nearly identical frame rates in Evolve with the same CPU.

Q: Is 6 GB of VRAM enough for Evolve at 1440p Ultra?

A: The measured data shows that at 2560x1440 Ultra, the average frame rate is 41 FPS, which is below the 60 FPS threshold. Whether this is caused by VRAM capacity or raw GPU compute power is not specified, but the result is not playable.

Q: What is the best CPU upgrade to pair with this RTX 2060 for Evolve?

A: The i7-14700KF is already an extremely high-end processor. Upgrading the CPU would provide no measurable benefit in Evolve, as the RTX 2060 is the limiting factor. A GPU upgrade would be the only way to improve frame rates.

Q: Does Evolve support DirectX 12 on this hardware?

A: The RTX 2060 supports DirectX 12 Ultimate (12_2), and the i7-14700KF is compatible with modern APIs. However, the specific API used in the measured FPS tests is not stated in the dataset.