Evolve

The Intel Core i7-13700K paired with the NVIDIA GeForce RTX 4060 delivers a mixed but generally capable experience in Evolve, a 2015 FPS. At 1080p, this combo is fully playable across every preset, including Ultra with an average of 82.5 FPS. At 1440p, users can run High settings at 75.3 FPS, while 4K is limited to Low settings for a 74.6 FPS average. The data shows a clear pattern: this configuration is strongest at mainstream resolutions, with 4K Ultra being the only unplayable scenario at 30.2 FPS. Benchmark results indicate the combination ranks 2039 out of 3700 tested combos, placing it in the mid-range for this specific title.

How This Combo Ranks

The Core i7-13700K + RTX 4060 combination holds rank 2039 out of 3700 tested combos for Evolve. This positioning places it in the 55th percentile of all tested hardware pairings, meaning slightly more than half of all combos tested deliver higher performance in this game. However, the rank must be interpreted carefully because the CPU is exceptionally strong relative to the GPU. The i7-13700K sits at the 89th percentile among all CPUs with an average benchmark score of 46881, while the RTX 4060 sits at the 61st percentile among all GPUs with an average score of 17639. This imbalance suggests the GPU is the limiting factor for achieving higher ranks in Evolve, especially at higher resolutions where the graphics card carries most of the load.

The data shows that this combo outperforms many lower-tier pairings but trails high-end configurations that pair flagship CPUs with top-tier GPUs. In terms of raw CPU performance, the i7-13700K’s nearest rivals include the AMD Ryzen 9 5900, which scores 46971 (0.2% higher), and the AMD Ryzen AI 9 HX PRO 375, scoring 47022 (0.3% higher). The Intel chip also sits close to the AMD Ryzen 9 7845HX (46654, 0.5% lower) and Intel Xeon w3-2535 (46653, 0.5% lower). These rival chips would produce nearly identical CPU-bound results in Evolve, meaning any performance differences in this game will come from the GPU side.

For the GPU, the RTX 4060’s nearest rivals are notably weaker in the broader hardware landscape. The AMD Radeon HD 7790 scores 17666 (0.2% higher), the AMD Radeon 780M scores 17588 (0.3% lower), and the AMD Radeon Pro 560 and Pro 460 score 17551 and 17509 respectively (0.5% and 0.7% lower). These deltas are tiny, suggesting that swapping the RTX 4060 for any of these GPUs would produce almost identical frame rates in Evolve, though the architectural differences could manifest in specific scenarios not captured by average scores.

CPU and GPU Roles

The division of labor between the Core i7-13700K and RTX 4060 shifts dramatically across resolutions in Evolve. At 1080p, the CPU’s strength becomes apparent. The i7-13700K features 16 cores and 24 threads with a boost clock of 5.40 GHz, and benchmark results show strong multi-threaded performance (Cinebench R23 multi-core score of 30745). At 1080p Low, the combo achieves 187.9 FPS, while 1080p Ultra drops to 82.5 FPS. This scaling from Low to Ultra at 1080p represents a 56% performance reduction, indicating that while the CPU can feed frames quickly at low settings, the GPU becomes increasingly stressed as graphical fidelity rises.

Moving to 1440p, the GPU’s role grows significantly. At 1440p Low, the combo delivers 125.1 FPS, which drops to 54.2 FPS at Ultra. The gap between Low and Ultra at 1440p is 57%, nearly identical to the 1080p gap, but the absolute numbers are lower because the RTX 4060 must render more pixels. The 8 GB GDDR6 memory on a 128-bit bus with 272.0 GB/s bandwidth becomes a limiting factor at this resolution, especially with higher presets that demand more texture memory and bandwidth.

At 4K, the GPU dominates the performance equation entirely. The RTX 4060’s 15.11 TFLOPS of FP32 compute and 118.1 GPixel/s pixel rate are insufficient for heavy 4K loads in Evolve. The measured data shows 4K Ultra at 30.2 FPS and 4K High at 46.7 FPS, while 4K Low reaches 74.6 FPS. The scaling from Low to Ultra at 4K is a 59% drop, similar to lower resolutions, but the starting point is so low that only Low settings remain playable. The CPU’s contribution at 4K is minimal because the GPU is fully saturated; even the i7-13700K’s 89th percentile CPU ranking cannot compensate for the GPU’s workload.

Across all resolutions, the pattern is consistent: the RTX 4060 is the bottleneck at higher settings, while the i7-13700K provides ample headroom. The CPU’s PassMark multi-thread score of 45887 and single-thread score of 4333 indicate it can handle any frame rate the GPU can produce in this game.

Measured FPS Breakdown

The measured FPS data for this combo covers three resolutions and four settings each, with average frame rates but no minimum or maximum values recorded. At 1920x1080, the results are as follows:

• Low: 187.9 FPS average
• Medium: 144.8 FPS average
• High: 117.2 FPS average
• Ultra: 82.5 FPS average

The 1080p results show a smooth progression from Low to Ultra, with each step up in settings costing roughly 20-30% performance. The jump from Low to Medium reduces FPS by 43.1 FPS (23%), Medium to High by 27.6 FPS (19%), and High to Ultra by 34.7 FPS (30%). This suggests that Ultra settings introduce particularly heavy effects or draw calls that strain the RTX 4060 even at 1080p.

At 2560x1440, the measured averages are:

• Low: 125.1 FPS
• Medium: 97.9 FPS
• High: 75.3 FPS
• Ultra: 54.2 FPS

The 1440p results show a similar pattern but with tighter absolute margins. Low to Medium drops 27.2 FPS (22%), Medium to High drops 22.6 FPS (23%), and High to Ultra drops 21.1 FPS (28%). Notably, the Ultra preset falls below the 60 FPS playability threshold at this resolution, making it unsuitable for smooth gameplay.

At 3840x2160, the averages are:

• Low: 74.6 FPS
• Medium: 54.8 FPS
• High: 46.7 FPS
• Ultra: 30.2 FPS

The 4K results reveal a severe scaling problem. Low settings just barely clear 60 FPS, but Medium drops to 54.8 FPS, High to 46.7 FPS, and Ultra plummets to 30.2 FPS. The gap between Low and Ultra at 4K is 44.4 FPS, representing a 59% reduction. This indicates that the RTX 4060’s 8 GB VRAM and 128-bit memory bus are overwhelmed by 4K textures and post-processing effects in Evolve.

Across all resolutions, the data shows no min or max FPS values, so frame time consistency cannot be assessed. However, the average FPS figures provide a clear picture of what users can expect.

The Verdict

The question of whether this PC can run Evolve depends entirely on the target resolution and settings. The verdict data identifies playable settings (those at or above 60 FPS) for each resolution. At 1920x1080, all four presets are playable, including Ultra at 82.5 FPS. This means users can enable maximum settings with full confidence in smooth performance. The 1080p Ultra result is particularly strong, offering 22.5 FPS of headroom above the 60 FPS threshold.

At 2560x1440, three of four presets are playable: High at 75.3 FPS, Medium at 97.9 FPS, and Low at 125.1 FPS. The Ultra preset at 54.2 FPS falls short of the 60 FPS threshold by 5.8 FPS, making it likely to feel stuttery during intense combat sequences. For 1440p gaming, High settings are the recommended maximum, providing 15.3 FPS of headroom.

At 3840x2160, only Low settings are playable, achieving 74.6 FPS. Medium (54.8 FPS), High (46.7 FPS), and Ultra (30.2 FPS) all fail to reach 60 FPS. The 4K Low result is playable but requires significant graphical compromises, including reduced texture quality and shadow detail. For 4K users, this combination is strictly a Low-settings solution for Evolve.

Overall, the verdict is positive for 1080p and 1440p gaming, with 1080p Ultra being the standout achievement. The 4K experience is limited but functional at Low settings. Users prioritizing 4K should consider a stronger GPU, while those playing at 1080p or 1440p will find this combo fully capable.

Similar Performance Alternatives

For users considering alternatives to this combo, the nearest rival hardware provides useful reference points. On the CPU side, the Intel Core i7-13700K’s closest competitors are the AMD Ryzen 9 5900, AMD Ryzen AI 9 HX PRO 375, AMD Ryzen 9 7845HX, and Intel Xeon w3-2535. All four chips deliver average benchmark scores within 0.5% of the i7-13700K’s 46881 average. In Evolve, any of these CPUs would produce virtually identical CPU-bound performance, meaning frame rates would only differ based on the GPU paired with them. The Ryzen 9 5900 (46971) and Ryzen AI 9 HX PRO 375 (47022) are marginally faster, while the Ryzen 9 7845HX (46654) and Xeon w3-2535 (46653) are marginally slower.

On the GPU side, the RTX 4060’s nearest rivals are the AMD Radeon HD 7790, AMD Radeon 780M, AMD Radeon Pro 560, and AMD Radeon Pro 460. These GPUs score between 17509 and 17666, with deltas ranging from -0.2% to 0.7% relative to the RTX 4060’s 17639 average. In Evolve, swapping the RTX 4060 for any of these GPUs would yield nearly identical frame rates at the same settings and resolution. The Radeon HD 7790 (17666) is the closest match, while the Radeon Pro 460 (17509) is the slowest of the group. Users with these GPUs can expect the same playable settings and FPS ranges documented above.

It is important to note that the GPU rivals are all significantly older or lower-tier products, which reflects the RTX 4060’s mid-range positioning. The CPU rivals, by contrast, are high-end chips from competing ecosystems, highlighting the i7-13700K’s strong performance. For users building a new system, choosing any of the rival CPUs will not change Evolve performance, but the GPU choice matters more for resolution scaling.

Best Settings per Resolution

The optimal settings for each resolution are determined by the most demanding preset that maintains at least 60 FPS average. At 1920x1080, the best settings are Ultra, which achieves 82.5 FPS. This is the highest preset available, and it clears the playability threshold by 22.5 FPS. Users can enable every graphical option without concern for performance drops. The 1080p Ultra result demonstrates that the RTX 4060 has sufficient headroom for this game at standard HD resolution.

At 2560x1440, the best settings are High, delivering 75.3 FPS. While Medium (97.9 FPS) and Low (125.1 FPS) are also playable, High offers the best visual quality among playable presets. The Ultra preset at 54.2 FPS is not recommended, as it falls 5.8 FPS short of the threshold. For 1440p users, High settings strike the optimal balance between fidelity and smoothness, providing 15.3 FPS of headroom.

At 3840x2160, the best settings are Low, achieving 74.6 FPS. This is the only playable preset at 4K, and it provides 14.6 FPS of headroom above the 60 FPS threshold. Medium (54.8 FPS), High (46.7 FPS), and Ultra (30.2 FPS) are all unplayable. The 4K Low preset will require significant visual compromises, including reduced texture resolution and simplified lighting effects, but it remains functional for gameplay. Users seeking higher 4K fidelity would need a more powerful GPU than the RTX 4060.

The data confirms that the RTX 4060’s sweet spot is 1080p, where it can handle Ultra settings, with 1440p High as a strong secondary option. The 4K experience is limited to Low, making this combo unsuitable for 4K enthusiasts. For most users, the recommended setup is 1080p Ultra or 1440p High, both of which deliver smooth, responsive gameplay in Evolve.