Instant compatibility check with FPS benchmarks and optimization tips
Evolve
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 34 | 51 | 64 | 81 |
| 1440p QHD | 58 | 88 | 113 | 148 |
| 1080p Full HD | 93 | 129 | 170 | 216 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Evolve on Your System
Can AMD Ryzen 9 5950X + NVIDIA GeForce RTX 3070 run Evolve? Benchmark data indicates this combination delivers a broadly playable experience across most settings, with the CPU holding a dominant position in the system while the GPU becomes the decisive factor at higher resolutions. The measured frame rates show a clear pattern: at 1080p the combo can push well past 200 FPS on low settings, but at 4K Ultra it falls below the 60 FPS playable threshold. This analysis breaks down the specific performance characteristics, compares the hardware to near-identical alternatives, and provides concrete settings recommendations for each resolution.
Similar Performance Alternatives
The AMD Ryzen 9 5950X sits in a performance tier where its nearest rivals are all within a single percentage point of its average benchmark score. The Intel Core Ultra 5 235HX trails by only 0.2%, while the AMD EPYC 8124P is 0.3% behind. On the other side, the Intel Core i9-13900F leads by 0.4%, and the Intel Core i7-14700 is 0.7% ahead. This means a system built around any of these four CPUs would deliver nearly identical CPU-bound performance in Evolve, making the choice between them effectively irrelevant for this game’s frame rates.
For the NVIDIA GeForce RTX 3070, the closest comparable GPUs show a slightly wider spread but remain within 1.5% of its average score. The AMD Radeon RX 7600 XT is 0.7% faster, the NVIDIA GeForce GTX 690 is 1% ahead, and the AMD Radeon HD 7970M is 1.1% faster. The NVIDIA Tesla K40c is 1.5% slower. In practical terms, swapping the RTX 3070 for any of these alternatives would produce frame rate differences of roughly one or two FPS in Evolve, which is imperceptible in actual gameplay. The GTX 690 and HD 7970M are notably older architectures, yet their benchmark scores align closely enough that they would behave similarly in this specific title.
CPU and GPU Roles
The division of labor between the Ryzen 9 5950X and RTX 3070 shifts dramatically across resolutions. At 1920x1080, the CPU’s 16 cores and 32 threads provide ample headroom, with the PassMark multithread score of 45424 and single-thread score of 3470 indicating strong per-core performance. The data shows that at 1080p Low, the system reaches 215.6 FPS, which is nearly three times the 4K Ultra result of 34.1 FPS. This massive gap suggests the GPU is the primary bottleneck even at 1080p, as the CPU easily feeds frames.
Moving to 2560x1440, the frame rates drop by roughly 30-40% compared to 1080p at identical settings. For example, High settings fall from 128.6 FPS to 87.7 FPS, a 31.8% reduction. This scaling is consistent with GPU-bound behavior, where pixel count directly impacts performance. At 3840x2160, the trend accelerates: High settings produce only 50.7 FPS, which is 60.6% lower than the 1080p High result. The RTX 3070’s 8 GB GDDR6 memory and 448.0 GB/s bandwidth become limiting factors at 4K, while the CPU’s workload remains relatively constant.
The preset scaling further clarifies the roles. At every resolution, the jump from Low to Medium costs roughly 20-25% of performance, while High to Ultra costs an additional 30-40%. This consistent pattern indicates that GPU settings, not CPU capabilities, dominate the frame rate equation. The Ryzen 9 5950X’s Cinebench R23 multicore score of 26017 ensures it never becomes the limiting factor, even at 1080p Low where the GPU is pushed to its maximum output.
Measured FPS Breakdown
At 1920x1080, the system delivers its highest frame rates across all presets. Low settings average 215.6 FPS, Medium drops to 169.6 FPS, High produces 128.6 FPS, and Ultra still maintains 92.7 FPS. Every preset at this resolution clears the 60 FPS playable threshold by a wide margin, with even the most demanding Ultra setting exceeding it by 54.5%. The gap between Low and Ultra is 122.9 FPS, demonstrating the GPU’s sensitivity to graphical fidelity.
At 2560x1440, the performance envelope tightens. Low settings average 147.7 FPS, Medium reaches 112.7 FPS, and High produces 87.7 FPS. Ultra drops to 58.4 FPS, which falls just below the 60 FPS threshold. This means three of four presets are playable, but Ultra requires a compromise. The drop from 1080p to 1440p at High settings is 40.9 FPS, a 31.8% reduction.
At 3840x2160, only two presets remain playable. Low settings average 81.1 FPS, Medium produces 64.3 FPS, but High falls to 50.7 FPS and Ultra drops to 34.1 FPS. The difference between Low and Ultra at 4K is 47 FPS, showing that the RTX 3070’s memory bandwidth and shading power are stretched to their limits. The 4K Medium result of 64.3 FPS is only 4.3 FPS above the playable threshold, leaving minimal headroom for demanding scenes.
How This Combo Ranks
Among the 3700 tested hardware combinations for Evolve, this specific pairing ranks 1569th. This places it in the 42.4th percentile, meaning roughly 57.6% of tested combos perform better. The ranking reflects the RTX 3070’s mid-tier position (61st percentile among all GPUs) rather than the CPU’s strength, since the Ryzen 9 5950X sits in the 91st percentile among all CPUs.
The gap between CPU and GPU percentiles is notable. A top-10% CPU paired with a mid-60% GPU results in a combo that is solidly average for this game. The 1569th rank suggests that while this system can run Evolve well at lower resolutions, it does not compete with high-end GPU pairings at 4K Ultra. The ranking also implies that upgrading the GPU would yield far greater performance gains than upgrading the CPU, which is already near the top of its class.
The Verdict
This PC can run Evolve, but the playable experience depends entirely on resolution and settings. At 1920x1080, all four presets—Low, Medium, High, and Ultra—clear the 60 FPS threshold, with Ultra averaging 92.7 FPS. At 2560x1440, High settings remain playable at 87.7 FPS, but Ultra falls short at 58.4 FPS. At 3840x2160, only Low and Medium are playable, with Medium producing 64.3 FPS and High dropping to 50.7 FPS.
For a 60 FPS target, the best playable preset at each resolution is: Ultra at 1080p (92.7 FPS), High at 1440p (87.7 FPS), and Medium at 4K (64.3 FPS). The system cannot maintain 60 FPS at 4K High or Ultra, nor at 1440p Ultra. The verdict is clear: this combo is a high-refresh-rate 1080p machine and a solid 1440p performer, but 4K gaming requires reduced settings.
FAQ
Q: What is the highest playable preset at 1920x1080?
A: Ultra settings average 92.7 FPS, which is well above the 60 FPS threshold. All four presets are playable at this resolution.
Q: Can this system run Evolve at 4K?
A: Yes, but only with Low (81.1 FPS) or Medium (64.3 FPS) settings. High and Ultra fall below 60 FPS at 50.7 and 34.1 FPS respectively.
Q: How does the CPU compare to its nearest rivals?
A: The Ryzen 9 5950X is within 0.7% of four alternatives: the Intel Core Ultra 5 235HX (-0.2%), AMD EPYC 8124P (-0.3%), Intel Core i9-13900F (+0.4%), and Intel Core i7-14700 (-0.7%).
Q: What GPU would perform similarly to the RTX 3070?
A: The AMD Radeon RX 7600 XT is 0.7% faster, the NVIDIA GeForce GTX 690 is 1% faster, and the AMD Radeon HD 7970M is 1.1% faster. The NVIDIA Tesla K40c is 1.5% slower.
Q: Is the CPU or GPU the bottleneck in this system?
A: The GPU is the limiting factor at all resolutions. The CPU ranks in the 91st percentile, while the GPU ranks in the 61st percentile. Frame rate scaling between resolutions confirms GPU-bound behavior.
Q: What is the best preset at 2560x1440 that stays above 60 FPS?
A: High settings average 87.7 FPS. Ultra drops to 58.4 FPS, which is below the playable threshold.
Best Settings per Resolution
At 1920x1080, Ultra settings provide the most demanding experience while maintaining 92.7 FPS average. This is the recommended preset for maximum visual quality at full HD.
At 2560x1440, High settings are the most demanding playable option, delivering 87.7 FPS. Ultra falls short at 58.4 FPS, so High is the optimal balance of quality and performance.
At 3840x2160, Medium settings are the best playable preset, averaging 64.3 FPS. This stays just above the 60 FPS threshold, while High drops to 50.7 FPS and Ultra to 34.1 FPS. For a smoother experience at 4K, Low settings offer 81.1 FPS but with reduced visual fidelity.