Evolve

The AMD Ryzen 9 5950X and Intel Arc B580 combination presents a distinct performance profile for Evolve, a 2015 FPS title. The data indicates this pairing is capable of delivering smooth gameplay at 1440p and 1080p, while struggling at 4K with higher presets. The following analysis breaks down the measured performance, comparing against nearby hardware and detailing exactly what settings are viable at each resolution.

Similar Performance Alternatives

For the CPU, the AMD Ryzen 9 5950X sits in a tight cluster of processors with nearly identical aggregate benchmark scores. The closest rival is the Intel Core Ultra 5 235HX, which scores 52,073 against the 5950X’s 51,947, a difference of only -0.2%. The AMD EPYC 8124P is similarly close at 52,121 (-0.3%), while the Intel Core i9-13900F trails by just 0.4% with a score of 51,730. The Intel Core i7-14700 leads this group slightly at 52,301, meaning the 5950X is 0.7% behind it. In practical terms for Evolve, any of these processors would deliver virtually indistinguishable frame rates, as the game’s CPU demands are well within the capabilities of all four.

On the GPU side, the Intel Arc B580’s average benchmark score of 23,021 places it alongside some unexpected company. The AMD Radeon RX 580 2048SP is the nearest match with a score of 23,061, a mere -0.2% difference. More notably, the NVIDIA GeForce RTX 2080 scores 22,895, which is 0.6% behind the B580, and the RTX 3080 scores 23,172, putting it 0.7% ahead. The NVIDIA P106-100 rounds out the group at 23,249 (-1.0%). This suggests that in Evolve, the B580’s performance will be comparable to these older or differently-positioned cards, meaning users coming from any of these GPUs should see similar frame rates in this specific title.

CPU and GPU Roles

The benchmark data reveals that the Intel Arc B580 is the primary bottleneck in this pairing for Evolve. Looking at the resolution scaling, the CPU’s influence diminishes as resolution increases, while the GPU’s load grows. At 1920x1080 with Low settings, the system achieves 153.4 FPS, which is a CPU-friendly scenario where the Ryzen 9 5950X’s 16 cores and 32 threads are more than sufficient. However, the GPU still manages to deliver high frame rates, indicating a balanced workload at this low preset.

When moving from 1080p Low to 1440p Low, the frame rate drops from 153.4 to 104.4 FPS, a 32% reduction. This is a direct consequence of the GPU having to render 78% more pixels. The CPU’s role remains constant, but the GPU’s rendering time increases. At 4K Low, the frame rate falls further to 59.8 FPS, another 43% drop from 1440p. This pattern shows that the GPU is the limiting factor as resolution climbs.

The preset scaling at a fixed resolution tells a similar story. At 1440p, moving from Low to Medium reduces FPS from 104.4 to 80.9, and then to 64.4 at High. The jump to Ultra is severe, dropping to 44.8 FPS. This 57% performance loss from Low to Ultra at 1440p is entirely GPU-driven, as the Ryzen 9 5950X’s single-thread score of 1,614 in Cinebench R23 and multi-thread score of 26,017 would not be challenged by Evolve’s AI and physics at any preset. The conclusion is clear: for this combo, users should adjust graphics settings to manage the GPU load, as the CPU will not be the source of frame rate limitations in any scenario tested.

FAQ

Q: Can this system run Evolve at 60 FPS on a 4K monitor?

A: No. The data shows no playable settings at 3840x2160. The best result is 59.8 FPS on Low settings, which just misses the 60 FPS threshold. Medium produces 47.2 FPS, High 36.7 FPS, and Ultra 25.7 FPS.

Q: What is the highest quality preset that maintains 60 FPS at 2560x1440?

A: High settings at 1440p produce an average of 64.4 FPS, which clears the 60 FPS threshold. Medium runs at 80.9 FPS and Low at 104.4 FPS, but High is the most demanding preset that remains playable.

Q: Is the Ultra preset playable at 1920x1080?

A: Yes. At 1080p, the Ultra preset averages 68.2 FPS, which is above the 60 FPS playable threshold. This is the best possible visual quality for this combination at this resolution.

Q: How does the Intel Arc B580 compare to a NVIDIA GeForce RTX 2080 in Evolve?

A: The Arc B580 has an average benchmark score of 23,021, which is 0.6% higher than the RTX 2080’s 22,895. In Evolve, this translates to nearly identical performance, with the B580 holding a slight edge in synthetic tests.

Q: What is the frame rate difference between Low and Ultra settings at 1080p?

A: At 1920x1080, Low settings yield 153.4 FPS, while Ultra yields 68.2 FPS. This represents a 55.5% reduction in frame rate when moving from the lowest to the highest preset.

Q: Does the Ryzen 9 5950X bottleneck the Arc B580 in this game?

A: No. The benchmark results show the GPU is the limiting factor. At 1080p Low, the system reaches 153.4 FPS, which is high enough to indicate the CPU is keeping up. The primary evidence is the steep frame rate drops when increasing resolution or settings, which are GPU-bound operations.

The Verdict

The data confirms that this PC can run Evolve, but with important caveats depending on the target resolution. At 1920x1080, the system is fully capable, clearing the 60 FPS threshold at every preset, including Ultra at 68.2 FPS. This is the most versatile resolution for this combo, allowing players to use maximum visual quality.

At 2560x1440, the system remains playable but with restrictions. The High preset is the most demanding option that stays above 60 FPS, averaging 64.4 FPS. Medium (80.9 FPS) and Low (104.4 FPS) also work, but Ultra falls to 44.8 FPS, which is below the playable threshold. For 1440p gaming, High settings are the recommended ceiling.

At 3840x2160, the system cannot maintain 60 FPS at any setting. The closest result is Low at 59.8 FPS, which is marginally below the threshold. All higher presets are significantly under 60 FPS, with Ultra at 25.7 FPS. Users with 4K displays would need to reduce resolution or accept sub-60 FPS performance.

How This Combo Ranks

Among the 3,700 tested combinations for Evolve, this specific pairing of the AMD Ryzen 9 5950X and Intel Arc B580 ranks 2,781st. This places it in the lower 25% of all tested systems. The rank is primarily influenced by the GPU’s 68th percentile standing among all GPUs, while the CPU is in the 91st percentile. The GPU’s mid-range performance holds the combo back, as evidenced by the 4K results. The ranking indicates that while this system is entirely playable at 1080p and 1440p, it is not a high-end performer for Evolve, and many other combinations of hardware will produce higher frame rates, particularly at higher resolutions.

Best Settings per Resolution

For each resolution, the most demanding preset that maintains an average of at least 60 FPS is as follows:

• 3840x2160: No playable settings. The best average FPS is 59.8 at Low, which falls below the 60 FPS threshold.
• 2560x1440: High settings, with an average of 64.4 FPS. This is the highest quality preset that remains above 60 FPS.
• 1920x1080: Ultra settings, with an average of 68.2 FPS. This provides the maximum visual fidelity while staying comfortably above the playable threshold.

Measured FPS Breakdown

The full set of measured average frame rates is presented below. No minimum or maximum frame rate data was recorded for any configuration.

3840x2160 (4K):

• Ultra: 25.7 FPS
• High: 36.7 FPS
• Medium: 47.2 FPS
• Low: 59.8 FPS

2560x1440 (1440p):

• Ultra: 44.8 FPS
• High: 64.4 FPS
• Medium: 80.9 FPS
• Low: 104.4 FPS

1920x1080 (1080p):

• Ultra: 68.2 FPS
• High: 91.4 FPS
• Medium: 118.1 FPS
• Low: 153.4 FPS

These results show a clear linear scaling pattern. At 1080p, the system has ample headroom, with even Ultra exceeding 60 FPS. At 1440p, the Ultra preset becomes unplayable, but all other settings are viable. At 4K, only the Low preset approaches the 60 FPS threshold, and it ultimately falls short. The data suggests that the Arc B580’s 12 GB of GDDR6 memory and 456.0 GB/s bandwidth are not sufficient for Evolve’s higher presets at 4K, but the card performs well at lower resolutions. The Ryzen 9 5950X’s performance is consistent throughout, confirming it is not a limiting factor in any of these scenarios.