Evolve

The AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 2060 combination presents a clear performance profile for Evolve, a 2015 FPS title. The recorded data spans three resolutions and four quality presets, offering a complete picture of what this pairing can deliver. The results show a system that handles 1080p comfortably, manages 1440p with some adjustments, and falls short of playable thresholds at 4K.

Measured FPS Breakdown

Starting at 3840x2160, the highest resolution tested, the system struggles to maintain smooth gameplay. At Low settings, the average frame rate reaches 56 FPS, which is close to the 60 FPS playable threshold but still below it. Medium settings drop the average to 43 FPS, with minimums recorded at 37 FPS and maximums at 50 FPS. High settings yield an average of 34 FPS, while Ultra settings produce the lowest result at 23 FPS average. None of these 4K configurations clear the 60 FPS mark, and the gap between Low and Ultra is substantial, a 33 FPS difference between the best and worst averages.

Moving to 2560x1440, the situation improves notably. Low settings deliver an average of 98 FPS, which is well above the playable threshold. Medium settings average 76 FPS, with a recorded minimum of 65 FPS and maximum of 87 FPS. High settings hit exactly 60 FPS on average, which matches the playable threshold precisely. Ultra settings fall to 41 FPS average, indicating that the most demanding preset is not viable at this resolution. The progression from Low to Ultra shows a steady decline: 98, 76, 60, and 41 FPS respectively.

At 1920x1080, the system performs at its best. Low settings produce an average of 146 FPS, which is more than double the playable threshold. Medium settings average 113 FPS, with minimums at 96 FPS and maximums at 130 FPS. High settings average 89 FPS, and even Ultra settings reach 62 FPS average. All four presets at 1080p exceed 60 FPS, making this resolution fully playable across the entire quality range. The spread from Low to Ultra is 84 FPS, showing that the GPU has enough headroom to handle even the heaviest settings at this resolution.

The data indicates a clear pattern: each resolution step down from 4K to 1080p roughly doubles the frame rate at equivalent settings. For example, High settings go from 34 FPS at 4K to 60 FPS at 1440p to 89 FPS at 1080p. Similarly, Low settings go from 56 FPS at 4K to 98 FPS at 1440p to 146 FPS at 1080p. This scaling suggests that the RTX 2060 is the limiting factor at higher resolutions, while the CPU provides ample support.

Best Settings per Resolution

For 3840x2160, no preset achieves an average of 60 FPS or higher. The closest result is Low settings at 56 FPS, but this still falls short of the playable threshold. The database records no playable settings for 4K, meaning users would need to accept frame rates below 60 FPS or reduce resolution.

At 2560x1440, the best playable setting is High, which averages exactly 60 FPS. This is the most demanding preset that stays at or above the playable threshold. Low and Medium also qualify as playable, with averages of 98 FPS and 76 FPS respectively, but High offers the best visual quality while maintaining 60 FPS. Ultra settings at 41 FPS are not playable, so High represents the ceiling for this resolution.

For 1920x1080, Ultra settings average 62 FPS, making it the best playable preset. This is the most demanding configuration available in the test suite, and it still clears the 60 FPS threshold with a small margin. High, Medium, and Low all exceed 60 FPS as well, with averages of 89, 113, and 146 FPS respectively. The system has enough performance to run Evolve at maximum quality on 1080p displays without compromise.

The verdict by resolution confirms this analysis. At 4K, the playable settings list is empty. At 1440p, High, Low, and Medium are playable, with High as the best option at 60 FPS. At 1080p, all four presets are playable, with Ultra as the best option at 62 FPS.

How This Combo Ranks

The combination of the AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 2060 ranks 2910 out of 3700 tested combinations in the database for Evolve. This places the system in the lower portion of the overall distribution, roughly in the 21st percentile of all tested combos. The ranking reflects the GPU's mid-tier position, as the CPU is a high-end part that contributes strong processing power but cannot compensate for the graphics card's limitations at higher resolutions.

The rank of 2910 means that a substantial number of other combinations deliver better frame rates in Evolve. This is expected given the RTX 2060's performance class, which sits near the 58th percentile among all GPUs in the database. The CPU, by contrast, ranks at the 92nd percentile among all CPUs, showing a significant imbalance between the two components. This pairing is not optimized for maximum frame rates, but rather for a specific balance that works well at 1080p and moderately at 1440p.

The database ranking does not account for price or efficiency, only measured FPS performance. Therefore, the 2910 rank is a pure performance indicator. The data shows that this combo is capable of running Evolve at playable levels, but many other combinations would offer higher frame rates, particularly at 1440p and 4K.

Similar Performance Alternatives

The CPU's nearest rivals in the database include the Intel Xeon Platinum 8260M, which scores 0.1% higher on average, and the Intel Xeon w5-2545, which scores 0.2% lower. The Intel Core i9-14900 scores 0.5% higher, while the AMD Ryzen AI 9 HX 470 scores 0.7% lower. These deltas are all within one percent, meaning any of these processors would produce nearly identical CPU-bound results in Evolve. The Ryzen 7 9850X3D's 8 cores and 16 threads, with a base clock of 4.70 GHz and boost clock of 5.60 GHz, place it in a performance tier where these rivals offer similar compute capabilities.

For the GPU, the nearest rivals are the NVIDIA GeForce GTX 580 with a 0% delta, the AMD Radeon 680M with a 0.1% higher score, the NVIDIA GeForce RTX 3050 OEM with a 0.6% higher score, and the AMD Radeon RX 7600 with a 0.8% higher score. These GPUs would produce frame rates within one percent of the RTX 2060 in Evolve, meaning users with any of these cards would see nearly identical performance. The RTX 2060's 6 GB of GDDR6 memory and 336.0 GB/s bandwidth are sufficient for Evolve at the tested resolutions, and its rivals fall into the same memory and bandwidth class.

In practical terms, swapping the CPU for any of its nearest rivals would change Evolve performance by less than one percent, assuming the GPU remains the same. Similarly, swapping the GPU for any of its nearest rivals would have a negligible impact on frame rates. This means that the measured FPS values for this combo are representative of a broader set of hardware configurations, not just this exact pairing.

FAQ

Q: Can this system run Evolve at 4K with 60 FPS?

A: No. The highest average FPS at 3840x2160 is 56 FPS on Low settings. Medium averages 43 FPS, High averages 34 FPS, and Ultra averages 23 FPS. None of these meet the 60 FPS playable threshold.

Q: What is the best preset for 1440p that stays at or above 60 FPS?

A: High settings average exactly 60 FPS at 2560x1440, making it the most demanding playable preset. Low and Medium also exceed 60 FPS, with averages of 98 FPS and 76 FPS respectively. Ultra averages 41 FPS and is not playable.

Q: Does Ultra settings at 1080p maintain a playable frame rate?

A: Yes. At 1920x1080, Ultra settings average 62 FPS, which is 2 FPS above the 60 FPS threshold. The system runs Evolve at maximum quality on 1080p without issue.

Q: How does this combo rank among all tested systems in Evolve?

A: This combination ranks 2910 out of 3700 tested combos, placing it in the lower 21% of the database. The ranking is based on measured FPS performance across all tested resolutions and presets.

Q: What is the frame rate difference between Low and Ultra at 1080p?

A: Low settings average 146 FPS, while Ultra settings average 62 FPS. This is a difference of 84 FPS, showing the significant performance cost of the highest quality preset at this resolution.

Q: Are there other GPUs that perform similarly to the RTX 2060 in Evolve?

A: Yes. The NVIDIA GeForce GTX 580 scores identically, while the AMD Radeon 680M scores 0.1% higher, the NVIDIA GeForce RTX 3050 OEM scores 0.6% higher, and the AMD Radeon RX 7600 scores 0.8% higher. All would deliver nearly the same frame rates.

The Verdict

This PC can run Evolve, but the experience depends heavily on resolution. At 1920x1080, the system fully clears the 60 FPS threshold across all presets. Ultra settings average 62 FPS, High averages 89 FPS, Medium averages 113 FPS, and Low averages 146 FPS. This makes 1080p the ideal resolution for this combination, allowing users to enable maximum visual quality while maintaining smooth gameplay.

At 2560x1440, the system is playable on High, Medium, and Low settings. High averages exactly 60 FPS, which meets the threshold but offers no headroom. Medium averages 76 FPS and Low averages 98 FPS, providing more comfortable margins. Ultra settings at 41 FPS are not playable, so users at 1440p must choose between High and lower settings.

At 3840x2160, the system cannot achieve 60 FPS on any preset. The best result is Low settings at 56 FPS, which is below the threshold. Medium, High, and Ultra all fall further behind, with averages of 43, 34, and 23 FPS respectively. Users with 4K displays should lower resolution to 1440p or accept frame rates below 60 FPS.

The verdict by resolution confirms this: 1080p is fully playable with Ultra as the best setting, 1440p is playable with High as the best setting, and 4K has no playable settings. The system is best suited for 1080p gaming, with 1440p as a viable alternative for users willing to compromise on quality.

CPU and GPU Roles

The data reveals a clear division of labor between the CPU and GPU at different resolutions. The Ryzen 7 9850X3D is a high-end processor with 8 cores, 16 threads, and a boost clock of 5.60 GHz. Its performance percentile of 92 among all CPUs indicates that it is far more capable than the RTX 2060, which sits at the 58th percentile among GPUs. This imbalance means the GPU is the primary bottleneck at all resolutions, but the CPU's influence varies.

At 1920x1080, the GPU is heavily loaded, and the CPU has sufficient headroom to feed it consistently. The frame rates scale smoothly from Low to Ultra, with only a 84 FPS drop between the lightest and heaviest presets. The CPU's strong single-thread performance, evidenced by a Cinebench R23 single-core score of 2228, ensures that frame pacing remains stable. The GPU's 6.451 TFLOPS of FP32 performance is enough to handle Evolve's demands at this resolution, and the CPU does not become a limiting factor.

At 2560x1440, the GPU's workload increases, and the frame rates drop accordingly. The gap between Low and Ultra widens to 57 FPS, showing that the GPU is working harder. The CPU still provides enough processing power to avoid becoming the bottleneck, as the frame rates are consistent and the minimums remain above 60 FPS for playable presets. The GPU's 336.0 GB/s memory bandwidth and 192-bit bus width are adequate for this resolution, but the performance margin narrows.

At 3840x2160, the GPU becomes severely strained. The frame rates fall below 60 FPS even on Low settings, and the difference between Low and Ultra is 33 FPS. The CPU's role diminishes further, as the GPU is clearly the limiting factor. The RTX 2060's 6 GB of VRAM and 192-bit memory interface are insufficient for 4K rendering in Evolve, regardless of the CPU's capabilities. The CPU's multicore score of 22807 in Cinebench R23 does not help at this resolution, because the GPU cannot keep up with the pixel workload.

The scaling between resolutions confirms this analysis. At High settings, the frame rates go from 89 FPS at 1080p to 60 FPS at 1440p to 34 FPS at 4K. This represents a 34% drop from 1080p to 1440p and a 43% drop from 1440p to 4K. The CPU's performance remains constant across these resolutions, so the frame rate changes are entirely attributable to the GPU. The data shows that the CPU matters most at 1080p, where it can help maintain high frame rates, while the GPU dominates performance at 1440p and 4K. For users seeking better 4K performance, upgrading the GPU would have a far larger impact than upgrading the CPU.