Evolve

The AMD Ryzen 7 5700X3D and NVIDIA GeForce RTX 4060 combination delivers a wide range of performance in Evolve, scaling from a demanding 4K experience to a high-refresh-rate 1080p machine. Measured data shows that the system’s playability hinges heavily on resolution and preset selection, with the GPU acting as the primary bottleneck at higher settings. This analysis breaks down the exact frame rates, component roles, and comparative standing of this combo against other tested hardware.

Measured FPS Breakdown

At 3840x2160 (4K), the combination shows its limits. With Ultra settings, the average frame rate drops to 30.5 FPS, which is below the 60 FPS playable threshold. Moving to High settings improves the average to 43.6 FPS, still not sufficient for smooth gameplay. The Medium preset yields 58.4 FPS, narrowly missing the 60 FPS target. Only the Low preset clears the bar, delivering a playable 74.3 FPS average. The progression from Low to Ultra shows a steep performance cost: the Ultra preset is roughly 59% slower than Low, indicating that the GPU’s shading and memory bandwidth are heavily taxed at this resolution.

At 2560x1440 (1440p), the system becomes more versatile. The Low preset produces a very high 130.1 FPS average, which is more than double the 60 FPS threshold. Medium settings remain strong at 100.5 FPS, while High settings still comfortably exceed the target with 76.7 FPS. The Ultra preset, however, falls to 52.6 FPS, which is below the playable mark. The gap between Low and Ultra here is about 60%, similar to 4K, but the absolute numbers are higher across the board, showing that the RTX 4060 has more headroom at this resolution.

At 1920x1080 (1080p), the combo is fully unleashed. The Low preset achieves an impressive 191.9 FPS average, suitable for high-refresh-rate monitors. Medium settings still deliver a very smooth 149.4 FPS. The High preset maintains a strong 114.6 FPS, and even the most demanding Ultra preset stays well above the threshold at 79.8 FPS. The scaling from 1440p to 1080p is consistent, with Ultra improving by about 52% and Low by about 48%, highlighting that the system is not CPU-limited at this resolution and that the GPU benefits directly from the reduced pixel count.

FAQ

*Q: Can this PC run Evolve at 4K with playable frame rates?*

A: Yes, but only at Low settings, which produce an average of 74.3 FPS. The Medium preset averages 58.4 FPS, which is just below the 60 FPS threshold, while High and Ultra are not playable at 43.6 FPS and 30.5 FPS, respectively.

Q: What is the best preset for 1440p gaming?

A: The High preset is the most demanding option that stays at or above 60 FPS, with an average of 76.7 FPS. The Ultra preset falls short at 52.6 FPS.

Q: Is the RTX 4060 sufficient for 1080p Ultra settings?

A: Yes, the data shows an average of 79.8 FPS at 1080p with Ultra settings, which is well above the 60 FPS playable threshold.

Q: How does the CPU benchmark score compare to its nearest rivals?

A: The Ryzen 7 5700X3D has an average benchmark score of 24709. Its closest rival, the AMD Ryzen 5 7600X3D, scores 24728, which is only 0.1% higher. The Intel Core i5-12450HX scores 24576, which is 0.5% lower, and the Intel Core i5-11600 scores 24563, which is 0.6% lower.

Q: How does the GPU benchmark score compare to its nearest rivals?

A: The RTX 4060 has an average benchmark score of 17639. The AMD Radeon HD 7790 scores slightly higher at 17666 (0.2% above), while the AMD Radeon 780M scores 17588 (0.3% below), and the AMD Radeon Pro 560 scores 17551 (0.5% below).

Q: What is the combo’s overall ranking among tested systems?

A: This specific CPU-GPU combination ranks 1976 out of 3700 tested combos for Evolve, placing it in the upper-middle tier of all configurations.

Best Settings per Resolution

For a consistent 60 FPS experience, the most demanding preset that remains playable varies by resolution. At 3840x2160, the Low preset is the only option that clears the threshold, with an average of 74.3 FPS. At 2560x1440, the High preset is the best choice, delivering 76.7 FPS on average. At 1920x1080, the Ultra preset is fully playable, providing 79.8 FPS on average. These settings represent the highest visual quality that still maintains a playable frame rate at each resolution, according to the measured data.

The Verdict

This PC can run Evolve, but the experience is heavily dependent on the target resolution. The data shows that at 1920x1080, the system is fully capable, with all four presets—Low, Medium, High, and Ultra—clearing the 60 FPS threshold. The Ultra preset averages 79.8 FPS, making it the recommended choice for the best visual fidelity at this resolution. At 2560x1440, the system remains playable on Low (130.1 FPS), Medium (100.5 FPS), and High (76.7 FPS), but the Ultra preset drops to 52.6 FPS, which is not playable. At 3840x2160, only the Low preset (74.3 FPS) is playable; Medium (58.4 FPS) is borderline, and High (43.6 FPS) and Ultra (30.5 FPS) are below the threshold. The verdict is clear: this is a strong 1080p and capable 1440p machine, but 4K playability is limited to the lowest settings.

Similar Performance Alternatives

Based on benchmark scores, the CPU and GPU each have close rivals that would likely produce similar gameplay. The AMD Ryzen 5 7600X3D has an average score of 24728, which is virtually identical to the Ryzen 7 5700X3D’s 24709 (a difference of 0.1%). This means that in CPU-bound scenarios, the 7600X3D would perform nearly the same. Other nearby CPUs include the AMD Ryzen 9 5900HX (24822, 0.5% higher) and the Intel Core i5-12450HX (24576, 0.5% lower), all of which fall within a narrow performance band.

For the GPU, the AMD Radeon HD 7790 scores 17666, which is 0.2% higher than the RTX 4060’s 17639, making it a statistical tie. The AMD Radeon 780M (17588, 0.3% lower) and AMD Radeon Pro 560 (17551, 0.5% lower) are also closely matched. These rival GPUs would likely deliver very similar frame rates in Evolve, assuming no other system bottlenecks. The combination of a CPU and GPU in this performance tier would produce gameplay results nearly indistinguishable from the tested setup.

How This Combo Ranks

The combination of the Ryzen 7 5700X3D and RTX 4060 ranks 1976 out of 3700 tested combos for Evolve. This places it in the 53rd percentile of all tested configurations, meaning it outperforms slightly more than half of the systems in the database. The ranking reflects a balanced pairing, where the CPU’s strong multi-threaded performance (a Cinebench R23 multi-core score of 22366) complements the GPU’s mid-range capabilities (a PassMark G3D score of 19545). The rank suggests that while this system is not at the top tier, it offers a solid mid-range experience, particularly at 1080p and 1440p. The 4K performance is the primary weakness, dragging the overall rank down relative to systems with more powerful GPUs.

CPU and GPU Roles

The data reveals a clear division of labor between the CPU and GPU across resolutions. At 1920x1080, the system is likely GPU-bound at higher settings, as the frame rates scale significantly with preset changes: from 191.9 FPS on Low to 79.8 FPS on Ultra. This 58% drop indicates the GPU’s shading and memory bandwidth are the limiting factors. The CPU, with a PassMark multi-thread score of 26318, has ample headroom to feed the GPU at this resolution, as evidenced by the high frame rates even at Low settings.

At 2560x1440, the GPU’s workload increases, and the scaling becomes more pronounced. The frame rates drop by roughly 60% from Low (130.1 FPS) to Ultra (52.6 FPS), confirming that the RTX 4060 is the primary constraint. The CPU’s role diminishes further, as the higher pixel count shifts the bottleneck almost entirely to the GPU’s fill rate and memory bandwidth (272.0 GB/s).

At 3840x2160, the GPU is overwhelmingly the dominant factor. The frame rates plummet to 30.5 FPS on Ultra, and even the Low preset only reaches 74.3 FPS. This is a clear indication that the RTX 4060’s 8 GB of GDDR6 memory and 128-bit bus are insufficient for high-fidelity 4K rendering in this title. The CPU’s performance, which is strong for a mid-range processor, becomes irrelevant at this resolution, as the GPU cannot keep up regardless of the CPU’s capabilities. The scaling between resolutions shows that the GPU is the limiting component for Evolve, particularly above 1080p, and that the CPU would only become a bottleneck in scenarios with very low graphical settings and extremely high frame rates, which are not present in the measured data beyond 1080p.