Evolve

Can AMD Ryzen 5 9600X + NVIDIA GeForce RTX 3070 run Evolve? The measured data indicates this combo delivers a wide spread of performance that hinges heavily on resolution and preset. Across the twelve tested configurations, average frame rates range from a demanding 33.5 FPS at 4K Ultra to a fluid 217.4 FPS at 1080p Low. The benchmark results show that this pairing is capable of clearing the 60 FPS playable threshold in the majority of scenarios, though the most extreme settings at 4K push the hardware past its limits. The data suggests a system that is well-balanced for high-refresh 1080p and solid 1440p gaming, with 4K requiring careful settings management.

Measured FPS Breakdown

At 1920x1080, the Ryzen 5 9600X and RTX 3070 combination produces its strongest results. With Low settings, the average frame rate hits 217.4 FPS, which drops to 166 FPS at Medium. High settings still deliver a very smooth 130.2 FPS average. The most demanding preset at this resolution, Ultra, manages an average of 93.4 FPS. Every preset at 1080p stays comfortably above the 60 FPS playable threshold, with even the heaviest load leaving a 33.4 FPS margin.

Moving to 2560x1440, the performance scales down predictably but remains strong. Low settings produce an average of 145.5 FPS, while Medium yields exactly 110 FPS. High settings drop to 86.6 FPS. Ultra is the only preset at this resolution that approaches the playable boundary, with an average of 60.3 FPS. This means that at 1440p, all four presets clear the 60 FPS mark, albeit with Ultra having only a razor-thin 0.3 FPS margin.

At 3840x2160, the picture changes significantly. Low settings still deliver a playable 82.9 FPS average, and Medium follows with 61.9 FPS. However, High settings fall to 52.8 FPS, which misses the 60 FPS threshold. Ultra is the most demanding configuration tested, yielding just 33.5 FPS. The gap between 1440p and 4K is substantial; for instance, High settings drop from 86.6 FPS at 1440p to 52.8 FPS at 4K, a loss of 33.8 FPS. Similarly, Ultra falls from 60.3 FPS to 33.5 FPS, a 26.8 FPS reduction.

The data reveals that the performance curve is not linear across resolutions. The jump from 1080p to 1440p costs roughly 28-34% of the frame rate depending on the preset, while the jump from 1440p to 4K costs an additional 39-44%. This indicates that the RTX 3070's 8 GB GDDR6 memory and 448.0 GB/s bandwidth begin to hit a wall as pixel count increases, particularly at the Ultra preset where the gap from 1440p to 4K is most pronounced.

CPU and GPU Roles

The measured FPS scaling between resolutions reveals which component acts as the bottleneck in this system. At 1080p, the CPU's role is more prominent. The Ryzen 5 9600X, with its 6 cores and 12 threads boosting up to 5.40 GHz, is able to feed the GPU efficiently at lower resolutions. The fact that 1080p Low reaches 217.4 FPS suggests that the GPU is not the limiting factor at this setting; instead, the CPU's single-thread performance, evidenced by a 3DMark single-thread score of 1253 and a Passmark single-thread score of 4570, likely sets the ceiling.

As resolution increases, the GPU becomes the primary constraint. The transition from 1080p to 1440p shows a consistent FPS drop across all presets, which is characteristic of the GPU taking on more pixel-rendering duties. The RTX 3070's 5888 shading units and 20.31 TFLOPS FP32 performance are substantial, but they are finite. The further drop from 1440p to 4K, where the pixel count more than doubles, reinforces this. At 4K Ultra, the 33.5 FPS result indicates a severe GPU bottleneck; the CPU is likely waiting on the GPU to complete frames.

The preset scaling within each resolution also tells a story. At 1080p, going from Low to Ultra drops the frame rate by 124 FPS (from 217.4 to 93.4). At 1440p, the same preset change costs 85.2 FPS (from 145.5 to 60.3). At 4K, the drop is 49.4 FPS (from 82.9 to 33.5). This pattern shows that at lower resolutions, the CPU and GPU work in tandem to allow high frame rates, and the preset changes have a larger absolute impact. At higher resolutions, the GPU is already saturated, so preset changes have a smaller absolute but still significant relative impact.

Best Settings per Resolution

For 1920x1080, the data clearly supports Ultra as the best setting. With an average of 93.4 FPS, it clears the 60 FPS threshold by 33.4 FPS, leaving ample headroom for demanding scenes. Lower presets offer higher frame rates, but Ultra provides the most visual fidelity without sacrificing playability.

At 2560x1440, the best setting is also Ultra, but with a caveat. The average of 60.3 FPS is just barely above the playable threshold. This is a viable choice for gamers who prioritize visual quality, but it leaves almost no margin for frame rate dips. For a more comfortable experience, High at 86.6 FPS would be a safer choice, yet the data shows Ultra technically clears the bar.

For 3840x2160, the best setting that stays at or above 60 FPS is Medium, with an average of 61.9 FPS. This is the most demanding preset that remains playable at 4K. Low settings offer a higher 82.9 FPS average but at a significant visual cost. High and Ultra both fall short of the 60 FPS threshold, making them unsuitable for a consistently smooth experience at this resolution.

The Verdict

Can this PC run Evolve? The verdictByResolution data provides a clear answer. At 1920x1080, all four presets — Low, Medium, High, and Ultra — are playable. The best setting is Ultra, which maintains an average of 93.4 FPS. This resolution is where the combo shines, offering high frame rates even at maximum settings.

At 2560x1440, all four presets also clear the 60 FPS threshold. The best setting is Ultra at 60.3 FPS, though this is a marginal pass. Gamers at this resolution have the full range of settings available, but should be aware that Ultra leaves little room for error.

At 3840x2160, only Low and Medium are playable. The best setting is Medium at 61.9 FPS. High (52.8 FPS) and Ultra (33.5 FPS) do not meet the 60 FPS requirement. This system can run Evolve at 4K, but only with reduced settings. For the full Ultra experience, a more powerful GPU would be necessary. Overall, the data shows a system that is excellent for 1080p and 1440p gaming, capable of 4K at medium settings, but unable to handle the highest visual presets at 4K.

Similar Performance Alternatives

Looking at the nearestRivals for the CPU, the AMD Ryzen 5 9600X sits at an average benchmark score of 29713. The closest alternatives are the AMD Ryzen 7 PRO 5755GE, which scores 29656 (just 0.2% slower), and the AMD Ryzen 7 7840H, which scores 29868 (0.5% faster). The AMD Ryzen 7 5800XT scores 29879 (0.6% faster), and the AMD Ryzen 7 8845HS scores 29955 (0.8% faster). In practical gaming terms, these deltas are negligible, meaning a system with any of these CPUs paired with the RTX 3070 would exhibit nearly identical FPS in Evolve.

For the GPU, the NVIDIA GeForce RTX 3070 has an average benchmark score of 17208. Its nearest rivals include the AMD Radeon RX 7600 XT, which scores 17083 (0.7% slower), and the NVIDIA GeForce GTX 690 at 17037 (1% slower). The AMD Radeon HD 7970M scores 17019 (1.1% slower), while the NVIDIA Tesla K40c scores 17468 (1.5% faster). These differences are within a couple of percent, so swapping the RTX 3070 for any of these would produce very similar frame rates in Evolve. The data suggests that this performance tier is tightly clustered, and the specific model within this group has minimal impact on the final gaming experience.

How This Combo Ranks

The combination of the AMD Ryzen 5 9600X and NVIDIA GeForce RTX 3070 ranks 1579 out of 3700 tested combos for Evolve. This places it in the 57th percentile of all systems tested for this game. The rank indicates that while this combo is above average, it is not in the top tier. The 4K Ultra result of 33.5 FPS is likely what drags the rank down, as many higher-ranked combos would handle that setting with ease. However, the strong 1080p and 1440p results show that this pairing is well-suited for the majority of gamers who play at those resolutions. The data implies that this combo is a solid mid-to-upper tier choice, competitive with many systems but not a top performer.

FAQ

Q: Can this system run Evolve at 4K with maximum settings?

A: No. At 3840x2160 with Ultra settings, the average frame rate is 33.5 FPS, which is well below the 60 FPS playable threshold. The playable settings at 4K are Low (82.9 FPS) and Medium (61.9 FPS).

Q: What is the best preset for 2560x1440?

A: The best setting at 2560x1440 is Ultra, which achieves an average of 60.3 FPS. This is the most demanding preset that stays at or above 60 FPS, though the margin is slim.

Q: How does the Ryzen 5 9600X compare to its nearest CPU rivals?

A: The Ryzen 5 9600X has an average benchmark score of 29713. Its nearest rivals, such as the AMD Ryzen 7 PRO 5755GE (29656) and AMD Ryzen 7 7840H (29868), are within 0.8% performance, making them functionally equivalent for gaming.

Q: Is the RTX 3070 a bottleneck at 1080p?

A: At 1080p Low, the system reaches 217.4 FPS, which suggests the CPU is the limiting factor. At 1080p Ultra, the frame rate drops to 93.4 FPS, indicating the GPU becomes more involved. The data shows a balanced workload at 1080p, with neither component being a clear bottleneck.

Q: What is the highest playable setting at 3840x2160?

A: The highest playable setting at 4K is Medium, with an average frame rate of 61.9 FPS. High settings at 4K drop to 52.8 FPS, which does not meet the 60 FPS threshold.

Q: How does this combo rank among all tested systems for Evolve?

A: This combination ranks 1579 out of 3700 tested combos, placing it in the upper half of systems tested for this game. The rank reflects strong 1080p and 1440p performance, with 4K Ultra being the notable weakness.