Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Evolve
FPS 2015

Evolve

99%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
245 FPS
Ultra 1080p Measured
110 FPS

1440p (2K / QHD)

Low 1440p Measured
175 FPS
Ultra 1440p Measured
74 FPS

4K (Ultra HD)

Low 4K Measured
99 FPS
Ultra 4K Measured
42 FPS
6.3ms Frame Time
9ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,482
Your CPU 36,945
Graphics Card
Required 27,876
Your GPU 41,187

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 42 60 77 99
1440p QHD 74 106 135 175
1080p Full HD 110 158 202 245

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 158
1920x1080 Low 245
1920x1080 Medium 202
1920x1080 Ultra 110
2560x1440 High 106
2560x1440 Low 175
2560x1440 Medium 135
2560x1440 Ultra 74
3840x2160 High 60
3840x2160 Low 99
3840x2160 Medium 77
3840x2160 Ultra 42

Performance Analysis: Evolve on Your System

The AMD Ryzen 5 5600F paired with the NVIDIA GeForce RTX 3080 Ti delivers a clear verdict for Evolve: this combination is overwhelmingly capable, clearing the 60 FPS playable threshold at every tested resolution and preset except for one specific configuration. Benchmark data measured for this exact combo ranks it 1011 out of 3700 tested combinations, placing it in the top third of all systems evaluated for this FPS title. The data reveals a system that can handle Evolve with substantial headroom, though the most demanding settings at 4K will require a compromise.

Measured FPS Breakdown

At 1920x1080, the AMD Ryzen 5 5600F and NVIDIA GeForce RTX 3080 Ti produce exceptional frame rates that leave little to desire. With Low settings, the average FPS reaches 245, a figure that far exceeds any display refresh rate commonly found on monitors. Moving to Medium settings, the average drops to 202 FPS, with a minimum of 172 FPS and a maximum of 232 FPS, indicating that even the lowest frame in this configuration remains nearly three times above the playable threshold. High settings yield an average of 158 FPS, while Ultra settings still deliver a robust 110 FPS average. At 1080p, the system never approaches any performance boundary, and the gap between the lowest and highest settings is substantial — Ultra runs at roughly 45% of the Low setting’s frame rate — yet every configuration remains far above 60 FPS.

At 2560x1440, the performance picture remains strong but begins to show more differentiation between presets. Low settings produce an average of 175 FPS, Medium settings deliver 135 FPS average with a minimum of 115 FPS and a maximum of 156 FPS, and High settings reach 106 FPS average. Ultra settings at 1440p still manage an average of 74 FPS, which clears the 60 FPS threshold with a modest 14 FPS of headroom. The scaling from 1080p to 1440p shows a predictable reduction: Ultra drops from 110 FPS to 74 FPS, a 33% decrease, while Low drops from 245 FPS to 175 FPS, a 29% decrease. These reductions indicate that resolution scaling affects all presets similarly, but the absolute numbers remain comfortable for smooth gameplay.

At 3840x2160, the data tells a more nuanced story. Low settings produce an average of 99 FPS, Medium settings deliver 77 FPS average with a minimum of 66 FPS and a maximum of 89 FPS, and High settings hit exactly 60 FPS average. The Ultra preset, however, falls to 42 FPS average, which is 18 FPS below the playable threshold of 60 FPS. This is the only configuration in the entire dataset where the system fails to meet the playability criterion. The Medium preset’s minimum of 66 FPS is particularly notable because it means the system stays above the threshold even during frame dips, whereas the High preset’s average of exactly 60 FPS offers no such safety margin — actual gameplay could see occasional drops below 60 FPS even if the average meets the mark.

The measured FPS data includes min and max values only for Medium settings at each resolution. At 1080p Medium, the spread from minimum to maximum is 60 FPS (172 to 232), at 1440p Medium the spread is 41 FPS (115 to 156), and at 4K Medium the spread is 23 FPS (66 to 89). This narrowing spread at higher resolutions suggests that the GPU becomes more consistently loaded as resolution increases, reducing frame-time variance. The RTX 3080 Ti’s 12 GB of GDDR6X memory and 912.4 GB/s bandwidth likely contribute to this stability, though the data does not isolate memory effects from other GPU characteristics.

FAQ

Q: Can this PC run Evolve at 4K resolution with Ultra settings?

A: No. At 3840x2160 with Ultra settings, the measured average FPS is 42, which falls 18 FPS below the 60 FPS playable threshold. The verdict data confirms that Ultra at 4K is not listed among playable settings, while High, Low, and Medium are all playable at that resolution.

Q: What is the best preset for 1440p gaming on this system?

A: The best preset at 2560x1440 is Ultra, which achieves an average of 74 FPS. This is the most demanding settings level that stays at or above 60 FPS, and it clears the threshold by 14 FPS. All four presets — Low, Medium, High, and Ultra — are playable at this resolution.

Q: How does the 1080p Medium setting compare to the 1440p Medium setting?

A: At 1920x1080 Medium, the average FPS is 202 with a minimum of 172 and maximum of 232. At 2560x1440 Medium, the average drops to 135 FPS with a minimum of 115 and maximum of 156. The 1440p configuration runs at roughly 67% of the 1080p frame rate for the same settings.

Q: Is the RTX 3080 Ti overkill for Evolve at 1080p?

A: The data suggests significant headroom. Even at Ultra settings, 1080p delivers 110 FPS average, which is 50 FPS above the playable threshold. Lower settings reach 245 FPS, which is far beyond what most displays can show. The GPU is clearly not the limiting factor at this resolution.

Q: What is the minimum FPS recorded for any playable configuration?

A: The lowest minimum FPS among playable settings is 60 FPS, recorded at 4K High (average exactly 60 FPS, though no min/max values were provided for that setting). For settings with explicit min/max data, the lowest minimum is 66 FPS at 4K Medium, which occurs when the average is 77 FPS.

Q: How does the CPU’s benchmark performance compare to its nearest rivals?

A: The AMD Ryzen 5 5600F has an average benchmark score of 36945, which places it at the 85th percentile among all CPUs. Its nearest rival, the Intel Core Ultra 5 225, scores 36938 with a deltaPct of 0, meaning they are statistically identical. The AMD Ryzen 5 5500X3D scores 37018 with a deltaPct of -0.2%, and the AMD Ryzen AI 7 PRO 450 scores 37093 with -0.4% deltaPct.

Similar Performance Alternatives

For the CPU, the AMD Ryzen 5 5600F’s average benchmark score of 36945 is closely matched by three alternatives. The Intel Core Ultra 5 225 scores 36938, a deltaPct of 0, meaning the two processors are effectively interchangeable in terms of aggregate performance. The AMD Ryzen 5 5500X3D scores 37018, just 0.2% higher, and the AMD Ryzen AI 7 PRO 450 scores 37093, 0.4% higher. The Intel Core i9-12900T also appears in the nearest rivals list with a score of 37112, a deltaPct of -0.5%. In practical terms for Evolve, any of these CPUs would produce nearly identical frame rates when paired with the same GPU, since the game’s performance at the tested resolutions is likely GPU-bound in most configurations. The Ryzen 5 5600F’s 6 cores and 12 threads, based on Zen 3 architecture, provide ample processing power for this FPS title, and the 0.5% or less variation among rivals would not produce a measurable FPS difference in the benchmark results shown.

For the GPU, the NVIDIA GeForce RTX 3080 Ti has an average benchmark score of 41187, placing it at the 83rd percentile among all GPUs. The nearest rival is the AMD Radeon Pro 5300 with a score of 40870 and a deltaPct of 0.8%, meaning the RTX 3080 Ti is about 1% faster in aggregate benchmarks. The NVIDIA Tesla M40 24 GB scores 41707 with a deltaPct of -1.2%, and the NVIDIA Tesla M40 scores 41897 with -1.7% deltaPct, both indicating the RTX 3080 Ti is slightly slower than these workstation cards in pure compute terms. The NVIDIA GeForce RTX 5070 scores 40377 with a deltaPct of 2%, meaning the RTX 3080 Ti outperforms it by 2% in average score. For Evolve specifically, the RTX 3080 Ti’s 12 GB memory capacity and 384-bit bus width provide substantial bandwidth for high-resolution textures, and its 80 RT cores and 320 tensor cores are more than sufficient for a 2015 FPS title that does not heavily utilize ray tracing.

In terms of combined system behavior, the data shows that the CPU and GPU scores correlate with the measured FPS results. The CPU’s 85th percentile ranking ensures no bottleneck at 1080p where the GPU delivers 245 FPS on Low settings. The GPU’s 83rd percentile ranking, combined with its nearest rivals all falling within 2% of its score, means that swapping in any of the listed alternatives would produce FPS results within a few frames of the measured values. The RTX 5070’s 2% lower score would likely reduce the 4K High average from 60 FPS to around 59 FPS, potentially crossing below the playable threshold, while the Tesla M40 24 GB’s 1.2% higher score would provide a small margin of safety at that same setting.

The Verdict

This PC can run Evolve across the vast majority of tested configurations, but the answer depends on resolution and preset choices. At 1920x1080, all four presets — Low, Medium, High, and Ultra — are playable, with the best setting being Ultra at an average of 110 FPS. This provides 50 FPS of headroom above the 60 FPS threshold, making 1080p gameplay exceptionally smooth even during intense firefights. At 2560x1440, all four presets are also playable, with Ultra achieving 74 FPS average, which is 14 FPS above the threshold. The 1440p Ultra experience will be smooth but with less margin for frame dips compared to 1080p.

At 3840x2160, the verdict becomes more selective. The playable settings are High, Low, and Medium, with High being the best playable preset at exactly 60 FPS average. Medium offers 77 FPS average with a minimum of 66 FPS, providing more consistent performance than High. Ultra at 4K is not playable, as its 42 FPS average falls well below the 60 FPS threshold. The practical recommendation is that this system is fully capable for Evolve at 1080p and 1440p with maximum settings, and at 4K with Medium settings for a safe margin or High settings for those willing to accept an average exactly at the threshold. The 4K Ultra configuration should be avoided unless the user is willing to tolerate sub-60 FPS performance.

CPU and GPU Roles

The data reveals how the CPU and GPU each contribute to Evolve’s performance across resolutions. At 1920x1080, the GPU is clearly the dominant factor, as evidenced by the dramatic scaling between presets. Low settings produce 245 FPS, while Ultra produces 110 FPS — a difference of 135 FPS that can only be attributed to GPU workload changes, since the CPU load is identical regardless of graphics settings. The CPU’s 85th percentile ranking and strong single-thread score of 2872 in Passmark ensure that it is not the bottleneck at these frame rates.

As resolution increases to 2560x1440, the GPU’s role becomes even more pronounced. The frame rate drops from 245 to 175 FPS on Low settings (a 29% reduction) and from 110 to 74 FPS on Ultra (a 33% reduction) when moving from 1080p to 1440p. This consistent proportional scaling indicates that the GPU is doing proportionally more work per frame, while the CPU’s contribution remains constant. At 3840x2160, the scaling continues: Low drops from 175 to 99 FPS (a 43% reduction from 1440p), and Ultra drops from 74 to 42 FPS (a 43% reduction). The fact that all presets scale similarly with resolution suggests that the CPU is not introducing a bottleneck at any point — if it were, we would expect the frame rate to plateau or the scaling to become non-linear at higher resolutions.

The CPU’s role is most visible when comparing the same resolution across different presets. At 1080p, the difference between Low and Ultra is 135 FPS, while at 4K the difference is 57 FPS (99 to 42). This narrowing gap at higher resolutions indicates that the GPU becomes the limiting factor as pixel count grows, reducing the relative impact of settings changes. The Ryzen 5 5600F’s 6 cores and 12 threads, running at base clock 3.00 GHz and boost 4.00 GHz, are sufficient to keep up with the RTX 3080 Ti even at 245 FPS on 1080p Low, which is the most CPU-demanding scenario in the dataset due to the high frame rate. The 32 MB shared L3 cache and DDR4 dual-channel memory support further reduce any potential CPU-side stalls.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, achieving an average of 110 FPS. This is the optimal choice for visual quality without sacrificing playability, and the 50 FPS margin above the threshold provides ample room for frame-time spikes. Users prioritizing maximum frame rates could select Low for 245 FPS, but Ultra delivers the full visual experience while remaining comfortably above the playability criterion.

At 2560x1440, the best setting is also Ultra, with an average of 74 FPS. This is 14 FPS above the 60 FPS threshold, which is sufficient for smooth gameplay but does not offer the same headroom as 1080p. Medium settings provide 135 FPS average if users prefer higher frame rates, but Ultra remains the best choice for visual fidelity while staying playable. The minimum FPS for 1440p Ultra is not provided in the data, so users should be aware that individual frames could dip below 60 FPS during demanding scenes, though the average suggests this would be rare.

At 3840x2160, the best playable setting is High, with an average of exactly 60 FPS. This meets the playable threshold but offers zero headroom, meaning any frame dip will result in sub-60 FPS performance. The safer recommendation is Medium, which delivers 77 FPS average with a minimum of 66 FPS, ensuring that even the lowest frames stay above the threshold. The data lists High as the “bestSettings” for 4K, but users who prioritize consistency over maximum visual quality should select Medium. Ultra at 4K is not a viable option, as its 42 FPS average falls far below playable levels. For users who insist on 4K Ultra, the system would need a GPU upgrade to achieve acceptable performance, though the RTX 3080 Ti’s nearest rivals all fall within 2% of its score, suggesting that no minor GPU swap would close the 18 FPS gap to 60 FPS.