Evolve

The AMD Ryzen 5 3600 paired with the NVIDIA GeForce RTX 5090 produces a wide spread of frame rates in Evolve, depending on resolution and quality preset. At 4K, the combination remains comfortably above the 60 FPS threshold across all tested settings, while at 1440p and 1080p the average frame rates climb well past 100 FPS. The following analysis breaks down the measured performance, compares the components to nearby alternatives, and explains which part of the system carries the workload at each resolution.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra. The recorded average frame rate at this setting is 62.4 FPS. This is the only resolution where the Ultra preset dips close to the playable threshold, but it still clears it by a small margin. High settings at 4K produce an average of 89.4 FPS, Medium reaches 116.5 FPS, and Low runs at 145.5 FPS. All four presets are playable at 4K, but Ultra is the maximum quality option that maintains the required frame rate.

At 2560x1440, the best preset that stays at or above 60 FPS is also Ultra, with an average of 105.3 FPS. The margin above the threshold is much larger here. High settings average 155.5 FPS, Medium averages 178.4 FPS, and Low reaches 198 FPS. Every preset at 1440p clears 60 FPS by a wide margin, so the Ultra setting is the natural choice for users who want the highest visual quality without sacrificing smoothness.

At 1920x1080, the Ultra preset averages 160.8 FPS, which is the best playable setting at this resolution. High settings average 187 FPS, Medium averages 206.5 FPS, and Low reaches 224.6 FPS. The frame rates at 1080p are high enough that even the most demanding preset leaves significant headroom above the 60 FPS threshold. The data indicates that this combination can handle Evolve at maximum quality at every resolution tested.

Similar Performance Alternatives

The CPU and GPU in this system each have nearby rivals based on average benchmark scores. For the AMD Ryzen 5 3600, the closest alternatives include the Intel Core i7-1260P, which scores 0.2% higher, and the Intel Core i5-11400, which scores 0.2% lower. Two AMD EPYC server processors, the EPYC 7573X and EPYC 7742, also sit within 0.2% of the Ryzen 5 3600's average score. In practical terms, swapping the Ryzen 5 3600 for any of these four parts would produce nearly identical CPU-bound behavior in Evolve, since their aggregate performance scores are separated by less than half a percent.

For the NVIDIA GeForce RTX 5090, the nearest rivals are the NVIDIA Tesla P100 PCIe 16 GB, which scores 0.3% higher, and the NVIDIA Tesla P100 PCIe 12 GB, which scores 0.6% higher. The AMD Radeon RX 6850M XT sits 1.1% below the RTX 5090, while the AMD Radeon Pro Vega 64X scores 1.4% higher. These deltas are small enough that the RTX 5090 and its nearest rivals would deliver essentially the same frame rates in Evolve at any given resolution and preset. Users considering a system with one of these GPUs instead of the RTX 5090 should expect similar measured performance, assuming the rest of the system remains unchanged.

FAQ

Q: Can this PC run Evolve at 4K with maximum settings?

A: Yes. At 3840x2160 with the Ultra preset, the system averages 62.4 FPS, which is above the 60 FPS playable threshold. Every other preset at 4K also clears 60 FPS, with High at 89.4 FPS, Medium at 116.5 FPS, and Low at 145.5 FPS.

Q: What is the best settings preset at 1440p?

A: The Ultra preset is the best playable setting at 2560x1440, with an average frame rate of 105.3 FPS. This leaves a large margin above the 60 FPS threshold, so there is no need to lower quality settings for smooth gameplay.

Q: How much faster is Low compared to Ultra at 1080p?

A: At 1920x1080, the Low preset averages 224.6 FPS, while Ultra averages 160.8 FPS. That is a difference of 63.8 FPS, or roughly 40% higher frame rate with Low settings. Both values are far above the playable threshold.

Q: Is the RTX 5090 much faster than its nearest GPU rivals?

A: The RTX 5090's average benchmark score is within 1.4% of its four nearest rivals. The AMD Radeon Pro Vega 64X scores 1.4% higher, the NVIDIA Tesla P100 PCIe 16 GB scores 0.3% higher, and the Tesla P100 PCIe 12 GB scores 0.6% higher. The AMD Radeon RX 6850M XT scores 1.1% lower. These differences are negligible for gaming performance.

Q: Which component has a higher percentile ranking?

A: The RTX 5090 ranks in the 92nd percentile among all GPUs, while the Ryzen 5 3600 ranks in the 71st percentile among all CPUs. The GPU is the stronger component relative to its peers.

Q: Does the Ryzen 5 3600 bottleneck the RTX 5090?

A: The measured frame rates in Evolve show that the system clears 60 FPS at every resolution and preset, including 4K Ultra at 62.4 FPS. The CPU's nearest rivals are within 0.2% in average score, so swapping the processor would not meaningfully change results. The data does not indicate a significant CPU limitation at the tested settings.

The Verdict

This system can run Evolve at every resolution and preset tested. The verdict data lists all four presets, Low, Medium, High, and Ultra, as playable at 3840x2160, 2560x1440, and 1920x1080. The playable threshold is 60 FPS, and every measured average frame rate exceeds that value. The lowest recorded average is 62.4 FPS at 4K Ultra, which is the most demanding combination in the dataset. At 1440p Ultra, the average rises to 105.3 FPS, and at 1080p Ultra it reaches 160.8 FPS. Users can select the Ultra preset at any resolution without dropping below the playable frame rate. The only setting that comes close to the threshold is 4K Ultra, but it still clears it by 2.4 FPS on average.

CPU and GPU Roles

The data shows that the GPU becomes increasingly important as resolution rises, while the CPU has a relatively consistent influence across all three resolutions. At 1920x1080, the frame rates are highest across every preset, with Low averaging 224.6 FPS and Ultra averaging 160.8 FPS. At 2560x1440, the same preset range produces averages between 198 FPS and 105.3 FPS. At 3840x2160, the averages drop further, ranging from 145.5 FPS at Low to 62.4 FPS at Ultra. This scaling pattern indicates that the rendering workload grows significantly with pixel count, and the RTX 5090's performance headroom shrinks correspondingly.

The difference between Low and Ultra at each resolution also highlights the GPU's role. At 1080p, the gap between Low and Ultra is 63.8 FPS. At 1440p, the gap is 92.7 FPS. At 4K, the gap is 83.1 FPS. The GPU handles the additional graphical load from higher quality settings, and the frame rate penalty scales with resolution. The CPU's contribution is more uniform, since the Ryzen 5 3600's single-thread and multi-thread scores are fixed regardless of resolution. The benchmark results indicate that Evolve at 4K Ultra is primarily a GPU-bound scenario, while at 1080p Low the system has enough headroom that both components operate well below their limits.

How This Combo Ranks

The combination of the AMD Ryzen 5 3600 and the NVIDIA GeForce RTX 5090 ranks 365th out of 3700 tested combos in Evolve. This places it in the top 10% of all tested system pairings. The rank reflects the strong GPU component, which sits in the 92nd percentile among all GPUs, combined with a CPU in the 71st percentile. The measured frame rates support this positioning, as the system clears 60 FPS at every tested preset and resolution. The high rank is driven primarily by the RTX 5090's substantial rendering capacity, while the Ryzen 5 3600 provides sufficient processing power to avoid holding back the GPU at the tested settings.

Measured FPS Breakdown

At 3840x2160, the system averages 89.4 FPS on High, 145.5 FPS on Low, 116.5 FPS on Medium, and 62.4 FPS on Ultra. The Ultra preset is the only 4K setting below 90 FPS, but it remains above the 60 FPS playable threshold. The spread from Low to Ultra is 83.1 FPS.

At 2560x1440, the averages are 155.5 FPS on High, 198 FPS on Low, 178.4 FPS on Medium, and 105.3 FPS on Ultra. The difference between the fastest and slowest presets is 92.7 FPS. All settings at this resolution produce frame rates well above the 60 FPS threshold.

At 1920x1080, the system averages 187 FPS on High, 224.6 FPS on Low, 206.5 FPS on Medium, and 160.8 FPS on Ultra. The gap between Low and Ultra is 63.8 FPS. Even the lowest average at 1080p, which is Ultra at 160.8 FPS, leaves more than 100 FPS of headroom above the playable threshold. The recorded data shows consistent performance scaling across presets and resolutions, with no anomalies or unexpected dips.