Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
397 FPS
Ultra 1080p Measured
167 FPS

1440p (2K / QHD)

Low 1440p Measured
284 FPS
Ultra 1440p Measured
119 FPS

4K (Ultra HD)

Low 4K Measured
177 FPS
Ultra 4K Measured
74 FPS
3.7ms Frame Time
6ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 84,003
Graphics Card
Required 27,400
Your GPU 54,209

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 74 118 144 177
1440p QHD 119 190 232 284
1080p Full HD 167 267 325 397

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 267
1920x1080 Low 397
1920x1080 Medium 325
1920x1080 Ultra 167
2560x1440 High 190
2560x1440 Low 284
2560x1440 Medium 232
2560x1440 Ultra 119
3840x2160 High 118
3840x2160 Low 177
3840x2160 Medium 144
3840x2160 Ultra 74

Performance Analysis: Downfall on Your System

FAQ

Q: What is the overall performance rank of this CPU and GPU combination in Downfall?

A: The combo ranks 280th out of 3,716 tested combinations, placing it in the top percentile of systems. This is a high-ranking position, indicating the hardware is well above average for handling this game.

Q: Can this system run Downfall at 4K with maximum settings?

A: Yes. At 3840x2160 with Ultra settings, the system achieves an average of 74 FPS. This clears the 60 FPS playable threshold, making Ultra settings fully playable at 4K.

Q: Which component, the CPU or GPU, is more likely to limit performance at lower resolutions?

A: At 1920x1080, the average FPS reaches 397 on Low settings, which is far above the GPU's likely headroom. The CPU's single-thread performance, evidenced by a Cinebench R23 single-core score of 7,303, becomes the more significant factor at lower resolutions where frame rates are extremely high.

Q: How does the RTX 4080 SUPER compare to its closest GPU rival in synthetic benchmarks?

A: The RTX 4080 SUPER has an average benchmark score of 54,209, which is 0.1% lower than the RTX 4080's 54,247. The AMD Radeon Pro W5700X scores 54,828, placing it 1.1% higher, while the Radeon RX 6750 GRE 12 GB scores 55,698, a 2.7% advantage.

Q: What is the FPS difference between Medium and Ultra settings at 1440p?

A: At 2560x1440, Medium settings produce an average of 232 FPS, while Ultra drops to 119 FPS. The gap is 113 FPS, showing a substantial performance cost for the highest preset.

Q: Is the CPU's multi-threaded performance competitive with its direct rivals?

A: The Core Ultra 9 290K Plus has an average benchmark score of 84,003, which is 0.2% higher than the Core Ultra 9 285K's 83,807. It also leads the AMD EPYC 4584PX by 1.1% and the AMD EPYC 9135 by 1.2%, while trailing the AMD EPYC 7F72 by 1.3%.

How This Combo Ranks

The combination of the Intel Core Ultra 9 290K Plus and the NVIDIA GeForce RTX 4080 SUPER achieves a rank of 280 out of 3,716 tested configurations in Downfall. This places the system in the top 7.5% of all tested combos, a strong result that reflects both the CPU's high synthetic scores and the GPU's solid benchmark performance.

The CPU's percentile rank of 96 among all tested processors indicates it is in the top 4% of CPUs, while the GPU's percentile of 86 places it in the top 14% of graphics cards. The combination of two high-percentile components yields a system that sits comfortably above the median tested combo, which would rank near position 1,858. The gap between this system's rank and the median is substantial, meaning it outperforms the vast majority of tested hardware.

The rank of 280 is particularly notable given the large number of tested combos. With 3,716 total configurations, this system is closer to the top 250 than to the middle of the pack. Benchmark results indicate that the CPU's multi-threaded performance, with a Cinebench R23 multi-core score of 51,731, and the GPU's DirectX 12 performance, with a Passmark score of 134, combine to produce a system that handles Downfall without significant bottlenecks at most settings.

CPU and GPU Roles

The data reveals that the GPU becomes the limiting factor at higher resolutions, while the CPU's influence is more apparent at lower resolutions where frame rates are exceptionally high. At 1920x1080 with Low settings, the system reaches 397 FPS, which is 2.2 times the 4K Low result of 177 FPS. This scaling suggests that at 1080p, the CPU's single-thread performance, demonstrated by a Cinebench R23 single-core score of 7,303, is sufficient to push frames well beyond what the GPU can render at higher resolutions.

At 3840x2160, the performance gap between presets narrows. Ultra settings yield 74 FPS, while Low settings produce 177 FPS. The difference between Low and Ultra at 4K is 103 FPS, while at 1080p the same preset gap is 230 FPS. This indicates that at 4K, the GPU's rendering workload dominates, and the CPU's role diminishes. The GPU's 16 GB of GDDR6X memory and 736.3 GB/s bandwidth are utilized more heavily at higher resolutions, making the GPU the primary determinant of performance.

At 2560x1440, the system shows balanced scaling. Low settings produce 284 FPS, and Ultra produces 119 FPS. The 165 FPS gap between these presets is larger than at 4K but smaller than at 1080p. This suggests that at 1440p, both components contribute meaningfully: the CPU can still feed high frame rates, while the GPU handles the increased pixel count. The data shows that the CPU's multi-threaded capabilities, with a Passmark multithread score of 60,860, are sufficient to avoid becoming a bottleneck at any resolution tested.

The Verdict

Benchmark results indicate that this system can run Downfall at all tested resolutions and presets above the 60 FPS playable threshold. At 3840x2160, the most demanding setting, Ultra, achieves an average of 74 FPS. This clears the 60 FPS threshold by 14 FPS, providing a playable experience at maximum quality.

At 2560x1440, Ultra settings reach 119 FPS, which is nearly double the playable threshold. High settings produce 190 FPS, and Medium settings produce 232 FPS. The system has substantial headroom at 1440p, allowing for smooth gameplay even with the highest preset.

At 1920x1080, performance is exceptional. Ultra settings yield 167 FPS, High settings produce 267 FPS, and Low settings reach 397 FPS. The system never falls below 167 FPS at any setting at 1080p, making it more than capable of handling Downfall with room to spare.

The verdict is clear: this PC runs Downfall at 60 FPS or higher at every resolution and preset combination tested. The lowest recorded average is 74 FPS at 4K Ultra, which still exceeds the playable threshold. Users can confidently select the highest visual quality at any resolution without concern for frame rate drops below playable levels.

Similar Performance Alternatives

For the CPU, the nearest rivals are the Intel Core Ultra 9 285K, AMD EPYC 4584PX, AMD EPYC 9135, and AMD EPYC 7F72. The Core Ultra 9 285K has an average benchmark score of 83,807, which is 0.2% lower than the 290K Plus's 84,003. This means the 285K would deliver nearly identical performance in Downfall, with differences imperceptible in real-world gameplay.

The AMD EPYC 4584PX scores 83,090, a 1.1% difference, and the AMD EPYC 9135 scores 82,980, a 1.2% difference. These server-class processors would produce very similar frame rates in Downfall, though their platform requirements differ. The AMD EPYC 7F72 scores 85,072, which is 1.3% higher than the 290K Plus, making it a marginally faster alternative.

For the GPU, the closest rival is the NVIDIA GeForce RTX 4080, with an average benchmark score of 54,247, a negligible 0.1% difference from the 4080 SUPER's 54,209. The AMD Radeon Pro W5700X scores 54,828, which is 1.1% higher, and the AMD Radeon RX 6750 GRE 12 GB scores 55,698, a 2.7% advantage. The AMD Radeon 8060S scores 55,757, a 2.8% difference. These GPUs would all produce similar frame rates in Downfall, with differences of only a few FPS at most.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 74 FPS. This is the highest quality setting available and it clears the threshold by a comfortable margin.

At 2560x1440, Ultra settings achieve 119 FPS, which is nearly double the 60 FPS threshold. This allows for maximum visual quality at 1440p with significant headroom.

At 1920x1080, Ultra settings reach 167 FPS, providing a high-refresh-rate experience. The system can handle the maximum preset at 1080p with more than 100 FPS of headroom above the playable threshold.

Measured FPS Breakdown

3840x2160 (4K):

  • Low: 177 FPS average
  • Medium: 144 FPS average, 123 FPS minimum, 166 FPS maximum
  • High: 118 FPS average
  • Ultra: 74 FPS average

2560x1440 (1440p):

  • Low: 284 FPS average
  • Medium: 232 FPS average, 197 FPS minimum, 267 FPS maximum
  • High: 190 FPS average
  • Ultra: 119 FPS average

1920x1080 (1080p):

  • Low: 397 FPS average
  • Medium: 325 FPS average, 276 FPS minimum, 374 FPS maximum
  • High: 267 FPS average
  • Ultra: 167 FPS average

The only preset with recorded minimum and maximum values is Medium at each resolution. At 4K Medium, the minimum is 123 FPS and the maximum is 166 FPS, showing a 43 FPS variance. At 1440p Medium, the range is 197 to 267 FPS, a 70 FPS spread. At 1080p Medium, the range is 276 to 374 FPS, a 98 FPS variance. The absence of minimum and maximum data for other presets means only average values are available for those settings, but all averages remain well above the 60 FPS threshold.