Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 48 | 77 | 93 | 114 |
| 1440p QHD | 77 | 123 | 150 | 183 |
| 1080p Full HD | 108 | 172 | 210 | 257 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
This PC configuration combines the Intel Core Ultra 7 270K Plus processor with the NVIDIA GeForce RTX 3070 graphics card for running the horror game Downfall. The measured frame rate data shows a system that handles the game comfortably across most settings, with the RTX 3070 being the primary performance driver. The following analysis breaks down the benchmark results by resolution, examines component roles, and provides clear guidance on optimal settings.
Measured FPS Breakdown
At 1920x1080, the frame rates are consistently high across all presets. The Low preset delivers an average of 257 FPS, which is the highest measured value for this configuration. Moving to Medium produces 210 FPS average, with a minimum of 179 FPS and maximum of 242 FPS. The High preset runs at 172 FPS average. The most demanding option, Ultra, still achieves 108 FPS average. All four settings at this resolution remain far above the 60 FPS playability threshold, with even the minimum recorded frame rate on Medium exceeding the playable threshold by a wide margin.
At 2560x1440, performance remains strong but shows the expected scaling. Low settings produce 183 FPS average. Medium delivers 150 FPS average, with minimum and maximum readings of 127 and 172 FPS respectively. High settings run at 123 FPS average. Ultra drops to 77 FPS average, which still clears the 60 FPS threshold. The gap between Low and Ultra at this resolution is approximately 106 FPS, indicating that the GPU has sufficient headroom for higher quality settings.
At 3840x2160, the resolution scaling becomes more pronounced. Low settings yield 114 FPS average. Medium produces 93 FPS average with a minimum of 79 FPS and maximum of 107 FPS. High settings sustain 77 FPS average. Ultra falls to 48 FPS average, which is the only configuration in the entire dataset that drops below the 60 FPS playable threshold. This makes 4K Ultra the single unplayable combination for this hardware pairing.
FAQ
Q: Can this system run Downfall at 4K resolution?
A: Yes, at 4K the system runs the game at playable frame rates on Low, Medium, and High settings. High preset achieves 77 FPS average, Medium achieves 93 FPS, and Low achieves 114 FPS. Only the Ultra preset, at 48 FPS average, fails to reach the 60 FPS threshold.
Q: What is the best quality setting at 1440p that maintains 60 FPS?
A: The Ultra preset at 2560x1440 runs at 77 FPS average, making it the highest quality option that stays above 60 FPS. All four presets at this resolution — Low, Medium, High, and Ultra — remain playable.
Q: How does the 1080p Ultra performance compare to 4K High performance?
A: At 1920x1080 Ultra, the system averages 108 FPS. At 3840x2160 High, the average is 77 FPS. This represents a 31 FPS difference, or roughly 40% higher frame rates at the lower resolution for equivalent quality tier.
Q: Is there a frame rate drop between Medium and Ultra at 4K?
A: Yes, the drop is substantial. Medium at 4K averages 93 FPS, while Ultra at 4K averages 48 FPS. This 45 FPS difference represents a 48% reduction in average frame rate when moving from Medium to Ultra at that resolution.
Q: What are the minimum frame rates recorded for this configuration?
A: The dataset includes minimum frame rates for Medium settings at each resolution. At 1080p the minimum is 179 FPS, at 1440p it is 127 FPS, and at 4K it is 79 FPS. No minimum values are provided for Low, High, or Ultra presets.
Q: Does the system maintain 60 FPS in the worst-case measured scenario?
A: The lowest average frame rate across all measurements is 48 FPS at 4K Ultra. The lowest recorded minimum frame rate is 79 FPS at 4K Medium. All other configurations maintain averages above 60 FPS.
CPU and GPU Roles
The data indicates that the GPU is the dominant performance factor for Downfall at all tested resolutions. The RTX 3070, with its 8 GB GDDR6 memory and 448.0 GB/s bandwidth, shows clear scaling patterns as resolution increases. The CPU's role becomes more relevant at lower resolutions where frame rates exceed 200 FPS, but even at 1080p Low with 257 FPS average, the system does not show signs of CPU bottlenecking in the measured data.
Resolution scaling from 1080p to 1440p shows an average frame rate reduction of roughly 25-30% across presets. For example, High settings drop from 172 FPS at 1080p to 123 FPS at 1440p, and Ultra drops from 108 FPS to 77 FPS. This consistent scaling pattern suggests the GPU is the limiting factor, as CPU-bound scenarios would show less degradation when pixel count increases.
The jump from 1440p to 4K produces a more dramatic performance drop. High settings fall from 123 FPS to 77 FPS, a 37% reduction. Ultra settings fall from 77 FPS to 48 FPS, a 38% reduction. This steeper decline at higher resolutions further confirms that the RTX 3070's rendering capabilities, rather than the Core Ultra 7 270K Plus's 24 cores and 24 threads, determine the system's performance ceiling.
The CPU's single-thread performance, reflected in its Cinebench R23 single-core score of 2439, is sufficient to feed the GPU even at the highest frame rates recorded. The data shows no scenario where frame rates plateau regardless of resolution changes, which would be the signature of a CPU limitation.
How This Combo Ranks
This specific CPU-GPU combination ranks 1592 out of 3716 tested combos for Downfall. This places the system in the 43rd percentile of all tested configurations. The ranking reflects the pairing of a high-end CPU with a mid-range GPU, where the RTX 3070's performance characteristics define the overall gaming experience.
The CPU's percentile ranking versus all CPUs is 96, indicating it outperforms 96% of tested processors in synthetic benchmarks. The GPU's percentile ranking versus all GPUs is 61, meaning it outperforms 61% of tested graphics cards. The significant gap between these two percentile values reveals that the GPU represents the performance bottleneck in this pairing for gaming workloads.
In the context of all 3716 tested combos, this system sits slightly below the median. This positioning makes sense given the GPU's mid-range status. The Core Ultra 7 270K Plus has an average benchmark score of 93785, while the RTX 3070 has an average benchmark score of 17208. The combination produces playable frame rates across nearly all settings, but does not reach the upper echelons of the ranking table.
Similar Performance Alternatives
The CPU's nearest rivals, based on average benchmark scores, include the Intel Xeon 6520P with a score of 93786 and 0% delta, the AMD EPYC 4564P with a score of 95183 and -1.5% delta, the AMD EPYC 9175F with a score of 95615 and -1.9% delta, and the AMD EPYC 4565P with a score of 95764 and -2.1% delta. These processors would produce nearly identical results in Downfall when paired with the same GPU, as the game's frame rates are primarily GPU-limited.
The GPU's nearest rivals include the AMD Radeon RX 7600 XT with an average score of 17083 and 0.7% delta, the NVIDIA GeForce GTX 690 with a score of 17037 and 1% delta, the AMD Radeon HD 7970M with a score of 17019 and 1.1% delta, and the NVIDIA Tesla K40c with a score of 17468 and -1.5% delta. These graphics cards would produce frame rates within approximately 1.5% of the RTX 3070 in Downfall, making them viable alternatives with nearly identical performance characteristics.
For users seeking similar gaming performance, swapping either component for one of these near-equivalent alternatives would yield comparable results. The small delta percentages indicate that these hardware choices sit within a narrow performance band.
The Verdict
This system can run Downfall at playable frame rates across all tested resolutions, with one exception. At 3840x2160, the playable settings include High, Low, and Medium, with High being the best playable setting at 77 FPS average. The Ultra preset at 4K, running at 48 FPS average, falls below the 60 FPS threshold and is not recommended.
At 2560x1440, all four presets are playable. The Ultra setting achieves 77 FPS average, matching the 4K High performance. This makes 1440p Ultra the sweet spot for maximum visual quality while maintaining smooth gameplay.
At 1920x1080, every preset runs at 108 FPS or higher. The Ultra setting delivers 108 FPS average, providing a comfortable margin above the 60 FPS threshold. This resolution offers the most headroom for maintaining high frame rates during intense gameplay scenes.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average of 77 FPS. While Medium and Low also maintain playable frame rates, High provides the best visual quality within the playable range.
At 2560x1440, the Ultra preset achieves 77 FPS average, making it the best setting that clears the 60 FPS threshold. This provides the highest visual fidelity while maintaining smooth performance.
At 1920x1080, the Ultra preset runs at 108 FPS average, making it the optimal choice. All four presets are playable at this resolution, but Ultra offers the maximum quality without sacrificing the 60 FPS requirement.