Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

76%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
174 FPS
Ultra 1080p Measured
73 FPS

1440p (2K / QHD)

Low 1440p Measured
124 FPS
Ultra 1440p Measured
52 FPS

4K (Ultra HD)

Low 4K Measured
77 FPS
Ultra 4K Measured
32 FPS
8.5ms Frame Time
13ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 93,785
Graphics Card
Required 27,400
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 32 52 63 77
1440p QHD 52 83 102 124
1080p Full HD 73 117 142 174

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 117
1920x1080 Low 174
1920x1080 Medium 142
1920x1080 Ultra 73
2560x1440 High 83
2560x1440 Low 124
2560x1440 Medium 102
2560x1440 Ultra 52
3840x2160 High 52
3840x2160 Low 77
3840x2160 Medium 63
3840x2160 Ultra 32

Performance Analysis: Downfall on Your System

Measured FPS Breakdown

The recorded data for this combination in Downfall shows a clear performance curve that scales with both resolution and preset level. At 3840x2160, the system delivers an average of 52 FPS on High settings, though this preset falls short of the 60 FPS playability threshold. Dropping to Medium at the same resolution yields 63 FPS average, with a minimum of 54 FPS and a maximum of 73 FPS, making it the highest preset that clears the playability bar. Low settings at 4K push the average to 77 FPS, while Ultra drops sharply to 32 FPS, indicating a steep cost for the highest visual quality tier at this resolution.

Moving to 2560x1440, the performance picture improves substantially. High settings deliver 83 FPS average, Medium reaches 102 FPS with a minimum of 86 and maximum of 117, and Low scales up to 124 FPS. Ultra at 1440p averages 52 FPS, which again falls below the 60 FPS threshold. The gap between Medium and High at this resolution is roughly 19 FPS, while the jump from High to Ultra costs about 31 FPS, showing that the Ultra preset imposes a heavy load even at the middle resolution.

At 1920x1080, every preset clears 60 FPS. Low settings average 174 FPS, Medium delivers 142 FPS with a minimum of 121 and maximum of 164, High reaches 117 FPS, and Ultra still holds at 73 FPS. The scaling from 1080p to 1440p at High settings shows a drop from 117 to 83 FPS, a reduction of 34 FPS. From 1440p to 4K at High, the average falls from 83 to 52 FPS, a further 31 FPS loss. The data indicates that resolution scaling impacts performance more heavily at the higher preset tiers, while Low settings maintain relatively high frame rates across all three resolutions.

FAQ

Q: Can this PC run Downfall at 60 FPS on a 4K monitor?

A: Yes, but only on Low and Medium presets. Medium averages 63 FPS with a minimum of 54 FPS, while Low averages 77 FPS. High and Ultra fall short at 52 FPS and 32 FPS respectively.

Q: What is the best quality setting at 1440p that stays above 60 FPS?

A: High settings at 2560x1440 average 83 FPS, making it the most demanding preset that clears the threshold. Ultra at this resolution averages 52 FPS, which is below the playability bar.

Q: Does the Ultra preset ever hit 60 FPS at any resolution?

A: Only at 1920x1080, where Ultra averages 73 FPS. At 2560x1440 Ultra averages 52 FPS, and at 3840x2160 it drops to 32 FPS.

Q: How much performance is lost when moving from 1080p to 4K on High settings?

A: The average FPS at High drops from 117 at 1920x1080 to 52 at 3840x2160, a reduction of 65 FPS. The intermediate step at 2560x1440 sits at 83 FPS.

Q: Which preset has the narrowest gap between minimum and maximum FPS?

A: At 2560x1440 Medium, the range spans from 86 to 117 FPS, a 31 FPS spread. At 1920x1080 Medium, the range is 121 to 164 FPS, a 43 FPS spread. At 3840x2160 Medium, the range is 54 to 73 FPS, a 19 FPS spread.

Q: Is the 60 FPS threshold met on Low settings at all three resolutions?

A: Yes. Low settings average 174 FPS at 1080p, 124 FPS at 1440p, and 77 FPS at 4K, all comfortably above the playability threshold.

How This Combo Ranks

The database places this specific combination at rank 2937 out of 3716 tested combos for Downfall. This positions the system in the lower portion of the overall distribution, roughly in the 21st percentile of all recorded configurations. The ranking reflects the balance between the CPU and GPU in this pairing, and the data indicates that while the processor is a high-end part, the graphics card constrains overall gaming performance in this title.

The CPU itself sits in the 96th percentile against all processors in the database, with an average benchmark score of 93785. Its nearest rivals include the Intel Xeon 6520P at 93786 with a 0% delta, the AMD EPYC 4564P at 95183 with a -1.5% delta, the AMD EPYC 9175F at 95615 with a -1.9% delta, and the AMD EPYC 4565P at 95764 with a -2.1% delta. These deltas are all within 2.1% of the Core Ultra 7 270K Plus, indicating that the CPU competes directly with high-end server parts in synthetic workloads.

The GPU, however, sits in the 58th percentile against all graphics cards, with an average benchmark score of 15290. Its nearest rivals are the NVIDIA GeForce GTX 580 at 15283 with a 0% delta, the AMD Radeon 680M at 15270 with a 0.1% delta, the NVIDIA GeForce RTX 3050 OEM at 15199 with a 0.6% delta, and the AMD Radeon RX 7600 at 15171 with a 0.8% delta. The tight clustering of these scores, all within 0.8% of the RTX 2060, suggests that the GPU delivers performance comparable to a range of older and newer cards, but none of these alternatives represent a significant step up in capability.

The combined ranking of 2937 out of 3716 reflects this imbalance. The processor is clearly capable of feeding the GPU, but the graphics card limits the frame rates at higher resolutions and presets. The measured FPS data supports this interpretation: at 1080p Low, the system reaches 174 FPS, which suggests the CPU can drive very high frame rates when the GPU load is light. As resolution and preset increase, the GPU becomes the limiting factor, and the frame rates drop accordingly.

The Verdict

The question of whether this PC can run Downfall depends entirely on the target resolution and preset. At 1920x1080, the system clears 60 FPS on every preset, including Ultra at 73 FPS average. This makes 1080p the only resolution where the full quality range is playable. At 2560x1440, the playable settings are Low, Medium, and High, with High averaging 83 FPS. Ultra at 1440p falls short at 52 FPS. At 3840x2160, only Low and Medium clear the threshold, with Medium averaging 63 FPS and Low at 77 FPS.

The verdict by resolution from the database confirms this: at 4K, the best playable setting is Medium at 63 FPS average. At 1440p, the best playable setting is High at 83 FPS average. At 1080p, the best playable setting is Ultra at 73 FPS average. For players prioritizing visual quality, 1080p Ultra offers the highest preset with a comfortable margin above the 60 FPS threshold. For those needing higher resolution, 1440p High provides a strong balance, while 4K users must accept Medium as the ceiling.

The system is fully capable of running Downfall, but the experience varies meaningfully by resolution. A 60 FPS target is achievable at all three resolutions, provided the preset is chosen appropriately. The data does not support running Ultra at 1440p or 4K, as both fall below the threshold, but the available presets at each resolution give users viable options for smooth gameplay.

CPU and GPU Roles

The measured FPS data reveals how the CPU and GPU divide responsibility across resolutions and presets. At 1920x1080 Low, the system reaches 174 FPS, a figure that suggests the CPU is delivering near its full potential while the GPU operates with minimal load. The drop from Low to Ultra at 1080p, from 174 to 73 FPS, shows that the GPU becomes increasingly stressed as visual quality rises, but even at Ultra the frame rate remains well above the threshold.

At 2560x1440, the pattern shifts. Low settings average 124 FPS, which is 50 FPS lower than the 1080p Low result. This reduction indicates that the GPU is now carrying more load even at the lowest preset, as the increase in pixel count directly impacts the rendering workload. The gap between Low and Ultra at 1440p, from 124 to 52 FPS, is a 72 FPS spread, which is larger than the 101 FPS spread at 1080p when measured proportionally. The data suggests that the GPU is the primary constraint at this resolution.

At 3840x2160, the CPU headroom becomes less relevant. Low settings average 77 FPS, which is only 47 FPS lower than the 1440p Low result and 97 FPS lower than the 1080p Low result. The Ultra preset at 4K falls to 32 FPS, a figure that indicates the GPU is heavily saturated. The scaling from 1080p to 4K at Low settings shows a 97 FPS drop, while the same resolution scaling at Ultra shows a 41 FPS drop, but the latter starts from a much lower base.

The data indicates that the CPU is rarely the limiting factor in this pairing. The Core Ultra 7 270K Plus has enough headroom to drive high frame rates at lower resolutions and presets, as evidenced by the 174 FPS result at 1080p Low. As resolution increases, the GPU becomes the dominant constraint, and the frame rates at 4K across all presets reflect the RTX 2060's limitations. The CPU's role is most visible at 1080p, where the system achieves frame rates that exceed what a weaker processor could sustain. At 4K, the GPU is clearly the bottleneck, and the CPU's performance advantage is largely unused.

Best Settings per Resolution

For each resolution, the database identifies the most demanding preset that remains at or above 60 FPS average. At 3840x2160, the best setting is Medium, which delivers 63 FPS average. This is the only preset above Low that clears the threshold at 4K, and it provides a meaningful improvement over Low's 77 FPS in terms of visual quality, though the margin above 60 FPS is slim.

At 2560x1440, the best setting is High, averaging 83 FPS. This represents a substantial step up from Medium at 102 FPS in visual fidelity, while still maintaining a comfortable 23 FPS margin above the playability threshold. The Ultra preset at 52 FPS is not viable for 60 FPS gameplay at this resolution.

At 1920x1080, the best setting is Ultra, averaging 73 FPS. This allows players to use the highest quality preset available in the game while staying 13 FPS above the threshold. The margin is smaller than at lower presets, but the 73 FPS average still provides a reasonable buffer for frame time variance.

These settings represent the optimal balance between visual quality and performance for each resolution. Players who prefer higher frame rates can select lower presets, with Low reaching 174 FPS at 1080p, 124 FPS at 1440p, and 77 FPS at 4K. The recommended settings prioritize quality while staying above the 60 FPS threshold, and the recorded averages provide confidence that the system will maintain playable performance.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU offer insight into what other hardware would behave similarly in this configuration. For the Intel Core Ultra 7 270K Plus, the closest match is the Intel Xeon 6520P, with an average benchmark score of 93786 compared to 93785, a 0% delta. The AMD EPYC 4564P scores 95183, which is 1.5% higher, while the AMD EPYC 9175F at 95615 is 1.9% higher, and the AMD EPYC 4565P at 95764 is 2.1% higher. These small deltas indicate that all four alternatives would deliver nearly identical CPU-bound performance in Downfall, with differences well within measurement noise.

For the NVIDIA GeForce RTX 2060, the nearest rival is the NVIDIA GeForce GTX 580 at 15283, a 0% delta. The AMD Radeon 680M scores 15270, 0.1% lower, while the NVIDIA GeForce RTX 3050 OEM at 15199 is 0.6% higher, and the AMD Radeon RX 7600 at 15171 is 0.8% higher. These GPU alternatives would produce very similar frame rates in Downfall, with the RX 7600 and RTX 3050 OEM offering marginally better performance and the GTX 580 and Radeon 680M being essentially equivalent.

The combination of a high-end CPU with a mid-range GPU means that swapping in any of these rival CPUs would have negligible impact on gaming performance, since the GPU is the limiting factor at most resolutions and presets. Similarly, swapping in any of the rival GPUs would produce frame rates within roughly 1% of the RTX 2060, which is unlikely to change the verdict at any resolution. The data suggests that this pairing sits in a stable performance tier, and users with any of these nearby components would experience similar results in Downfall.