Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
442 FPS
Ultra 1080p Measured
185 FPS

1440p (2K / QHD)

Low 1440p Measured
315 FPS
Ultra 1440p Measured
132 FPS

4K (Ultra HD)

Low 4K Measured
196 FPS
Ultra 4K Measured
82 FPS
3.4ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 70,879
Graphics Card
Required 27,400
Your GPU 60,347

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 82 132 161 196
1440p QHD 132 212 258 315
1080p Full HD 185 296 361 442

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 296
1920x1080 Low 442
1920x1080 Medium 361
1920x1080 Ultra 185
2560x1440 High 212
2560x1440 Low 315
2560x1440 Medium 258
2560x1440 Ultra 132
3840x2160 High 132
3840x2160 Low 196
3840x2160 Medium 161
3840x2160 Ultra 82

Performance Analysis: Downfall on Your System

The Intel Core Ultra 7 265K paired with the NVIDIA GeForce RTX 4090 delivers exceptional performance in Downfall, a horror title that proves surprisingly demanding at higher settings. The measured data shows this combination achieves playable frame rates at every tested resolution, including 4K Ultra, making it a top-tier option for this game.

Measured FPS Breakdown

The benchmark results for this combo are extensive, covering three resolutions and four quality presets. At 1920x1080, the lowest resolution tested, frame rates are extraordinarily high. With Low settings, the average FPS reaches 442. Moving to Medium, the average drops to 361 FPS, with a minimum of 307 FPS and a maximum of 416 FPS. High settings yield an average of 296 FPS, while Ultra settings still produce a substantial 185 FPS average. These numbers indicate the CPU and GPU combination is heavily GPU-limited at this resolution, as the frame rates scale almost linearly with the graphics workload.

At 2560x1440, the performance remains impressive but shows the expected scaling. Low settings produce an average of 315 FPS. Medium settings deliver 258 FPS on average, with a minimum of 219 FPS and a maximum of 297 FPS. High settings average 212 FPS, and Ultra settings maintain a strong 132 FPS average. The gap between Low and Ultra narrows compared to 1080p, suggesting the GPU is beginning to become a more significant factor.

The most demanding scenario is 3840x2160 (4K). Here, Low settings still manage a 196 FPS average. Medium settings drop to 161 FPS on average, with a minimum of 136 FPS and a maximum of 185 FPS. High settings average 132 FPS, and Ultra settings, the most demanding preset, still achieve a comfortable 82 FPS average. Even at 4K Ultra, the system stays well above the 60 FPS playability threshold, indicating substantial headroom.

FAQ

Q: Can this system maintain 60 FPS at 4K resolution with the highest settings?

A: Yes. At 3840x2160 with Ultra settings, the measured average FPS is 82, which is 22 FPS above the 60 FPS playable threshold.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 2560x1440, Low settings average 315 FPS, while Ultra settings average 132 FPS. This represents a 58% reduction in frame rate when moving from the lowest to the highest quality preset.

Q: Is there a significant frame time variance at any resolution?

A: The data includes minimum and maximum FPS values only for the Medium preset. At 1920x1080 Medium, the range is 307 to 416 FPS. At 2560x1440 Medium, it is 219 to 297 FPS. At 3840x2160 Medium, the range is 136 to 185 FPS.

Q: How does the 1080p performance compare to 4K performance?

A: At Low settings, 1080p averages 442 FPS, while 4K averages 196 FPS. At Ultra settings, 1080p averages 185 FPS, and 4K averages 82 FPS. The scaling is roughly 2.2x to 2.3x in favor of 1080p.

Q: Which preset is the most demanding that still clears 60 FPS at 4K?

A: The Ultra preset at 3840x2160 is the most demanding, and it still achieves an average of 82 FPS, which is above the 60 FPS threshold.

Q: Does the system ever drop below 60 FPS in the tested configurations?

A: No. The lowest recorded average FPS across all tested resolutions and settings is 82 FPS at 4K Ultra. The only minimum FPS values recorded are for the Medium preset, and all of them are above 136 FPS.

Best Settings per Resolution

For each resolution, the most demanding preset that maintains an average of at least 60 FPS is the highest quality option available. At 1920x1080, the Ultra preset is the best choice, delivering an average of 185 FPS. At 2560x1440, Ultra settings also provide the best visual quality while maintaining a 132 FPS average. At 3840x2160, the Ultra preset is again the recommended config, with an average of 82 FPS. In every case, the system has enough performance to run the game at its maximum visual fidelity without dipping below the playability threshold.

Similar Performance Alternatives

Based on the nearest rivals in the benchmark database, several other hardware combinations would offer comparable performance in Downfall. For the CPU, the Intel Core Ultra 7 265K sits close to the Intel Xeon 6511P, which has an average score 0.2% lower, and the Intel Xeon Platinum 8270, which is 0.7% lower. The Intel Core i7-14700KF is 1% higher in score, and the AMD Ryzen 7 9700F is 1.3% higher. These processors would likely produce similar frame rates in this game, as the GPU is often the limiting factor.

On the GPU side, the NVIDIA GeForce RTX 4090 is closely matched by the Intel Arc Pro A60, which has a nearly identical average score with a 0% delta. The AMD Radeon Pro Vega 48 is 0.3% higher, and the AMD Radeon Pro W6600M is 2.5% higher in score. The AMD Radeon PRO V710 is 2.9% lower. In practice, these GPUs should deliver very similar performance to the RTX 4090 in Downfall, especially at higher resolutions where the GPU workload is more significant.

CPU and GPU Roles

The data reveals a clear shift in component importance depending on the resolution. At 1920x1080, the frame rates are exceptionally high, reaching up to 442 FPS on Low settings. This indicates the CPU is capable of feeding the GPU with enough data to saturate it almost completely. The scaling from Low to Ultra at 1080p is substantial, from 442 to 185 FPS, representing a 58% performance drop. This suggests the GPU is the primary bottleneck at this resolution, as the CPU has ample headroom.

At 2560x1440, the trend continues. Low settings average 315 FPS, and Ultra settings average 132 FPS, a 58% reduction. The relative scaling is similar to 1080p, but the absolute numbers are lower. This indicates the GPU is still the limiting factor, but the CPU's role becomes slightly more pronounced as the resolution increases.

At 3840x2160, the GPU's dominance is even more evident. Low settings average 196 FPS, and Ultra settings average 82 FPS, a 58% decrease. The performance drop from 1080p to 4K at the same settings is roughly 2.2x, which aligns with the increase in pixel count. This scaling confirms that the GPU is the primary driver of performance in Downfall, with the CPU providing sufficient compute power to avoid becoming a bottleneck even at the highest frame rates.

The Verdict

This system can absolutely run Downfall at exceptional quality levels. The verdict by resolution confirms that all tested presets at all three resolutions are playable. At 3840x2160, the Ultra preset achieves an average of 82 FPS, clearing the 60 FPS threshold by a significant margin. At 2560x1440, Ultra settings average 132 FPS, providing a smooth experience with plenty of headroom. At 1920x1080, Ultra settings average 185 FPS, which is ideal for high-refresh-rate monitors. The data shows that this combination of the Intel Core Ultra 7 265K and NVIDIA GeForce RTX 4090 is more than capable of running the game at maximum settings in 4K, with performance to spare for future titles or additional graphical mods.

How This Combo Ranks

In the benchmark database, this specific CPU and GPU combination ranks 109th out of 3716 tested combos for Downfall. This places it in the top 3% of all tested systems, indicating it is a high-end configuration that outperforms the vast majority of alternatives. The rank reflects the strong synergy between the 20-core Intel processor and the RTX 4090's massive compute power. While it is not the absolute fastest combo ever tested, its position in the top percentile demonstrates that it is a top-tier choice for this game, capable of delivering maximum settings at 4K with a comfortable margin above the 60 FPS playability threshold.