Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 90 | 144 | 175 | 214 |
| 1440p QHD | 144 | 231 | 282 | 345 |
| 1080p Full HD | 202 | 324 | 395 | 482 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The Intel Core Ultra 7 265 and NVIDIA GeForce RTX 5090 D combination ranks second out of 3,716 tested combos in Downfall, placing it in the top fraction of one percent of all systems. This pairing delivers playable performance at every resolution and preset tested, with the RTX 5090 D providing enough headroom to run the game at maximum settings even at 4K, where it averages 90 FPS. The Core Ultra 7 265 sits at the 93rd percentile among all CPUs, while the RTX 5090 D holds the 92nd percentile among all GPUs, making this a balanced, high-end configuration that never bottlenecks the horror title.
Similar Performance Alternatives
The Core Ultra 7 265 produces an average benchmark score of 64,640, placing it within a tight cluster of competing processors. Its closest rival, the AMD EPYC 4464P, scores 64,823, a mere 0.3% higher, meaning the two chips are effectively interchangeable for gaming workloads. The Intel Core Ultra 7 265F trails by 0.3% with a score of 64,438, while the AMD EPYC 7343 sits 0.7% behind at 64,202, and the AMD EPYC 9124 leads by 0.7% at 65,104. In practical terms, any of these four processors would deliver nearly identical frame rates in Downfall, with differences well below the threshold of perceptible variance.
On the GPU side, the RTX 5090 D averages 77,712 across its benchmark suite. The AMD Radeon RX 6650M XT comes within 1.1% at 76,904, while the AMD Radeon RX 6850M XT scores 78,940, a 1.6% advantage over the 5090 D. The NVIDIA Tesla P100 PCIe 12 GB and 16 GB variants post 79,396 and 79,605 respectively, leading by 2.1% and 2.4%. These deltas are small, but they indicate that the RTX 5090 D does not dominate its peer group as decisively as its flagship positioning might suggest. For Downfall specifically, the measured FPS data shows the 5090 D performing far above the playable threshold, so even a 2.4% slower alternative would still maintain 60 FPS at Ultra settings across all resolutions.
CPU and GPU Roles
Downfall is a horror game from 2016, and the measured FPS data reveals that the GPU is the primary driver of performance scaling, though the CPU keeps pace without becoming a limiting factor. At 1920x1080, the RTX 5090 D produces 482 FPS at Low settings, 395 FPS at Medium, 324 FPS at High, and 202 FPS at Ultra. Moving to 2560x1440, those figures drop to 345, 282, 231, and 144 respectively. At 3840x2160, the numbers fall further to 214, 175, 144, and 90. The scaling from Low to Ultra at each resolution shows a consistent pattern: Ultra settings roughly halve the frame rate compared to Low, while Medium and High sit between those extremes.
The resolution scaling tells a clearer story about GPU load. From 1080p to 1440p, the average FPS across settings drops by approximately 29%, and from 1440p to 4K, it drops another 38%. These are substantial reductions that point squarely at the GPU as the bottleneck. The RTX 5090 D’s 32 GB of GDDR7 memory and 1.79 TB/s bandwidth provide ample headroom for the game’s textures, and the 104.8 TFLOPS of FP32 compute handles the rendering workload efficiently. The Core Ultra 7 265, with 20 cores and 20 threads boosting to 5.30 GHz, delivers single-thread performance that never holds back the GPU, as evidenced by the fact that even at 1080p Low—where CPU overhead is most likely to appear—the system still reaches 482 FPS.
For a game of this era, the CPU’s role is secondary. The Core Ultra 7 265’s Cinebench R23 single-core score of 5,960 and multi-core score of 42,216 indicate strong processing power, but Downfall’s workload is predominantly GPU-bound. At 4K Ultra, the GPU is clearly the limiting factor, with the frame rate dropping to 90 FPS while the CPU likely remains underutilized. At 1080p Low, the CPU has more influence, but the 482 FPS result shows it handles the game’s logic without breaking a sweat.
How This Combo Ranks
The combo ranks second out of 3,716 tested combinations in Downfall, a remarkable position that places it just behind a single other system. This ranking reflects the combined strength of the Core Ultra 7 265 and RTX 5090 D, with the GPU’s raw performance and the CPU’s high single-thread speed working together to produce exceptional frame rates. The 93rd percentile CPU ranking and 92nd percentile GPU ranking align well, meaning neither component is dramatically stronger or weaker than the other, which helps the system maintain high performance across varied workloads.
Given that this combo sits at rank 2, the only systems ahead of it would require either a faster CPU, a faster GPU, or both. The RTX 5090 D’s predecessor, the GeForce 40 series, and its successor, the GeForce 60 series, bracket its position in the product stack, but within the tested field, this pairing is nearly unbeatable. The nearest rivals in the GPU benchmark—the Radeon RX 6850M XT and Tesla P100 variants—are all within 2.4% of the 5090 D, so a system with one of those GPUs and a comparable CPU could theoretically edge out this combo, but the margin would be razor-thin.
The Verdict
Yes, this PC runs Downfall with authority. The verdict data confirms that all four settings—Low, Medium, High, and Ultra—are playable at every resolution tested, with the playable threshold set at 60 FPS. At 3840x2160, the best playable setting is Ultra, which averages 90 FPS, comfortably above the 60 FPS threshold with 50% headroom. At 2560x1440, Ultra averages 144 FPS, more than double the threshold. At 1920x1080, Ultra averages 202 FPS, over three times the minimum requirement.
The RTX 5090 D’s performance is so far above the playable threshold that even the most demanding preset at the highest resolution leaves substantial margin for frame rate dips. The measured data includes min and max FPS only for Medium settings, where the 4K results show a min of 149 and max of 202, indicating stable frame pacing. For other settings, the average figures alone are sufficient to confirm playability, as even the lowest recorded average of 90 FPS at 4K Ultra is well above 60 FPS. This system is not just capable of running Downfall—it obliterates the performance requirements.
Measured FPS Breakdown
At 1920x1080, the system delivers its highest frame rates. Low settings produce an average of 482 FPS, while Medium settings average 395 FPS with a minimum of 335 and maximum of 454. High settings average 324 FPS, and Ultra settings average 202 FPS. These numbers indicate that at 1080p, the game runs at refresh rates that exceed the capabilities of virtually all consumer monitors, making the CPU and GPU combination overkill for this resolution.
At 2560x1440, performance remains exceptionally high. Low settings average 345 FPS, Medium settings average 282 FPS with a minimum of 240 and maximum of 324, High settings average 231 FPS, and Ultra settings average 144 FPS. The step from 1080p to 1440p reduces frame rates by roughly 30% across all settings, but the absolute numbers remain far above the playable threshold. The 144 FPS at Ultra is particularly notable, as it matches the refresh rate of many high-end gaming monitors.
At 3840x2160, the system still delivers strong performance, though the scaling becomes more pronounced. Low settings average 214 FPS, Medium settings average 175 FPS with a minimum of 149 and maximum of 202, High settings average 144 FPS, and Ultra settings average 90 FPS. The gap between Medium and Ultra is significant—a 85 FPS difference—but even the lowest result at Ultra remains playable. The min FPS of 149 at Medium settings shows that frame rates stay consistent, with no severe drops that would cause stuttering.
Best Settings per Resolution
At 1920x1080, the best playable setting is Ultra, with an average of 202 FPS. This is the highest quality preset available, and the system handles it with more than triple the 60 FPS threshold. There is no reason to lower settings at this resolution, as even the maximum quality level leaves enormous performance headroom. Users with 360 Hz monitors could take advantage of the High setting’s 324 FPS average, but Ultra remains the best choice for image quality.
At 2560x1440, Ultra is again the best playable setting, averaging 144 FPS. This exactly matches the refresh rate of many 1440p gaming monitors, making it an ideal pairing for a 144 Hz display. The 144 FPS average provides smooth, tear-free gameplay when V-sync is enabled, and the 1440p resolution offers a good balance between visual fidelity and performance. Lower settings would only be necessary for users with high refresh rate 1440p displays seeking frame rates above 144 FPS.
At 3840x2160, Ultra remains the best playable setting, averaging 90 FPS. This is the most demanding configuration tested, and the system still clears the 60 FPS threshold by 50%. The 90 FPS average at 4K Ultra is a strong result for a horror game, where slower pacing and atmospheric tension benefit from high visual quality. Users with 4K displays that support 120 Hz or higher refresh rates could consider dropping to High settings, which average 144 FPS, but for most players, Ultra at 90 FPS is the recommended configuration.