Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 57 | 92 | 112 | 137 |
| 1440p QHD | 92 | 147 | 180 | 220 |
| 1080p Full HD | 129 | 206 | 252 | 308 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
Downfall is a Horror title released in early 2016, which places it firmly in the "any modern hardware can handle it" category, and the recorded data confirms exactly that. Paired with an RTX 5080, the Intel Core Ultra 7 155H delivers frame rates that never drop below 57 FPS at any resolution or preset, and in most configurations the average sits well above the 60 FPS playability threshold. This pairing is not merely adequate for Downfall, it is dramatically overqualified, and the numbers below make that case in detail.
How This Combo Ranks
Across the 3716 hardware combinations tested in the database for Downfall, the Core Ultra 7 155H and RTX 5080 pairing ranks 1016th. That places it in the top third of tested configurations for this game, a solid standing driven almost entirely by the graphics card rather than the processor.
The CPU component is the limiting narrative here. The Core Ultra 7 155H sits in the 83rd percentile against all CPUs in the database, with an average benchmark score of 32697. Its nearest rivals are a tight cluster: the Intel Core i5-14600T scores 32707 on average, effectively identical. The AMD Ryzen AI 7 PRO 360 averages 32662, the AMD Ryzen 5 7400F averages 32750, and the AMD Ryzen 7 PRO 6850H averages 32812. All four sit within a fraction of a percent of the 155H, so in CPU-bound scenarios this chip performs like any of those comparable parts.
The GPU is a different story. The RTX 5080 occupies the 87th percentile against all GPUs, with an average benchmark score of 56083. Among comparable cards, the Radeon 8060S averages 55757 and the RX 6750 GRE 12 GB averages 55698, both marginally slower. The Radeon Pro W5700X trails further at 54828, while the Radeon RX 9070 GRE edges ahead at 57367. In short, the 5080 is a near-top-tier graphics card, and for a 2016 horror game it removes any realistic GPU bottleneck.
Best Settings per Resolution
The playability threshold used throughout this analysis is 60 FPS average. The recorded results give the following recommendations.
At 1920x1080, the most demanding preset that clears the bar is Ultra, delivering an average of 129 FPS. Every preset tested at this resolution is playable: Low averages 308, Medium 252, and High 206.
At 2560x1440, Ultra again stays above the line with an average of 92 FPS. Low averages 220, Medium 180, and High 147, so there is no reason to compromise on settings at this resolution.
At 3840x2160, Ultra falls just short with an average of 57 FPS, below the 60 FPS threshold. High is the recommended ceiling, averaging 92 FPS. Medium averages 112 and Low averages 137, both comfortably playable.
The pattern is consistent: two of the three resolutions support the maximum preset, and even at 4K the shortfall at Ultra is a mere 3 FPS on average.
CPU and GPU Roles
The scaling data reveals how work is divided between the two components in Downfall.
Start with the resolution scaling at a fixed preset. At Medium, frame rates go from 252 FPS at 1080p to 180 FPS at 1440p and 112 FPS at 4K. That is a 29 percent drop moving to 1440p and a further 38 percent drop moving to 4K, all with the same CPU feeding the pipeline. When frame rates fall this steeply as resolution rises, the GPU is the constraint, not the processor.
Preset scaling tells the complementary story. At 1080p, going from Low at 308 FPS to Ultra at 129 FPS costs 58 percent of the frame rate, again a GPU-driven trade-off since render load is what changes between presets. At 4K the same span runs from 137 FPS on Low to 57 FPS on Ultra.
The CPU's influence shows up in the ceiling. Even at the least demanding configuration tested, 1080p Low, the frame rate tops out at 308 FPS rather than climbing higher. That ceiling is consistent with a processor in the 83rd percentile, capable but not extreme, paired with a laptop-class chip designed around a 28 W TDP. In practice this ceiling is irrelevant for Downfall, since every playable configuration runs far below it.
The verdict on roles: at all three resolutions and all four presets, the RTX 5080 does the heavy lifting and the Core Ultra 7 155H stays out of the way. The game never becomes meaningfully CPU-limited at playable settings.
FAQ
Q: Can this PC run Downfall at 4K?
A: Yes, at High, Medium, and Low presets. High averages 92 FPS at 3840x2160, Medium 112, and Low 137. Only Ultra falls short of 60 FPS, averaging 57.
Q: What is the best overall settings combination?
A: 1920x1080 at Ultra, averaging 129 FPS, offers maximum visual quality with the highest headroom. 2560x1440 at Ultra is equally valid at 92 FPS.
Q: Is the Core Ultra 7 155H fast enough for this game?
A: Yes. It sits in the 83rd percentile of all CPUs in the database and scores on par with parts like the Ryzen 7 PRO 6850H and Core i5-14600T. Downfall, a 2016 release, never stresses it at playable frame rates.
Q: Does the RTX 5080 get bottlenecked by this CPU?
A: Not in any configuration that matters for this game. Frame rates scale strongly with both resolution and preset, which indicates GPU-bound behavior. The only CPU-limited region is above 300 FPS at 1080p Low.
Q: What hardware ranks close to this combo?
A: On the GPU side, the Radeon 8060S and RX 6750 GRE 12 GB perform within about one percent of the 5080's average score. On the CPU side, the Ryzen 5 7400F and Ryzen 7 PRO 6850H are statistically equivalent to the 155H.
Q: What is the minimum frame rate recorded?
A: The database captured minimum and maximum values only for Medium presets: 214 to 289 FPS at 1080p, 153 to 207 at 1440p, and 95 to 129 at 4K. The lowest recorded minimum is 95 FPS at 4K Medium, still well above 60.
Measured FPS Breakdown
All figures below are measured averages from the database, with min/max ranges where recorded.
3840x2160 (4K):
- Low: 137 avg FPS
- Medium: 112 avg FPS (min 95, max 129)
- High: 92 avg FPS
- Ultra: 57 avg FPS
2560x1440:
- Low: 220 avg FPS
- Medium: 180 avg FPS (min 153, max 207)
- High: 147 avg FPS
- Ultra: 92 avg FPS
1920x1080:
- Low: 308 avg FPS
- Medium: 252 avg FPS (min 214, max 289)
- High: 206 avg FPS
- Ultra: 129 avg FPS
Several observations stand out. First, High at 4K and Ultra at 1440p produce identical 92 FPS averages, an interesting crossover showing that dropping to a lower resolution buys exactly one preset tier at the same frame rate. Second, the Medium min/max spreads are narrow, roughly 25 to 30 percent of the average, indicating stable frame delivery rather than erratic spikes. Third, even the worst result on the board, 4K Ultra at 57 FPS, misses the playability line by only 3 frames.
The Verdict
Yes, this PC runs Downfall decisively. The verdict by resolution is unambiguous.
At 1920x1080, all four presets are playable and Ultra is the recommendation at 129 FPS average. At 2560x1440, all four presets again clear 60 FPS, with Ultra recommended at 92 FPS average. At 3840x2160, High, Medium, and Low are playable, with High recommended at 92 FPS average; Ultra alone falls short at 57 FPS.
Eleven of the twelve measured configurations exceed the 60 FPS threshold, and the single miss is marginal. For a Horror game from 2016, this pairing of an 83rd-percentile mobile CPU and an 87th-percentile flagship-class GPU delivers performance that is, if anything, far beyond what the title demands. Players choosing this combination for Downfall should simply max out the settings at 1080p or 1440p and enjoy the frame rates.