Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

94%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
314 FPS
Ultra 1080p Measured
132 FPS

1440p (2K / QHD)

Low 1440p Measured
224 FPS
Ultra 1440p Measured
94 FPS

4K (Ultra HD)

Low 4K Measured
140 FPS
Ultra 4K Measured
59 FPS
4.7ms Frame Time
7ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 32,697
Graphics Card
Required 27,400
Your GPU 60,347

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 59 94 114 140
1440p QHD 94 150 184 224
1080p Full HD 132 211 257 314

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 211
1920x1080 Low 314
1920x1080 Medium 257
1920x1080 Ultra 132
2560x1440 High 150
2560x1440 Low 224
2560x1440 Medium 184
2560x1440 Ultra 94
3840x2160 High 94
3840x2160 Low 140
3840x2160 Medium 114
3840x2160 Ultra 59

Performance Analysis: Downfall on Your System

Downfall is a lightweight horror title from 2016, and the Intel Core Ultra 7 155H paired with the NVIDIA GeForce RTX 4090 handles it with an enormous margin at every resolution in the database. The recorded data shows frame rates above 60 FPS in every preset except one, 4K Ultra, which lands at 59 FPS, a single frame short of the playable threshold. Every other combination measured, from 1080p Low through 1440p Ultra, clears the bar comfortably, often by a factor of two or more.

Similar Performance Alternatives

For anyone assembling a system that behaves similarly to this one, the recorded benchmark averages point to several close equivalents on each side.

On the CPU side, the Core Ultra 7 155H sits in the 83rd percentile of all processors in the database with an average benchmark score of 32697. The nearest rivals cluster almost exactly around it. The Intel Core i5-14600T posts an average score of 32707, effectively identical to this chip. The AMD Ryzen AI 7 PRO 360 averages 32662, a fraction behind, while the AMD Ryzen 5 7400F averages 32750 and the AMD Ryzen 7 PRO 6850H averages 32812, both marginally ahead. All four sit within half a percent of the Ultra 7 155H, so any of them would deliver indistinguishable behavior in Downfall, a game where the CPU is rarely the limiting factor at higher resolutions. The Ultra 7 155H brings 16 cores and 22 threads with a 4.80 boost clock, backed by 24 MB of shared L3 cache and support for DDR5 in a dual-channel configuration with 89.6 GB/s of memory bandwidth. Its PassMark multithread score of 24873 and single-thread score of 3468 confirm it as a well-rounded mobile processor rather than a specialist.

On the GPU side, the RTX 4090 ranks in the 88th percentile of all GPUs with an average benchmark score of 60347. Its closest neighbors in the database are an interesting mix: the Intel Arc Pro A60 averages 60326, effectively a tie, the AMD Radeon Pro Vega 48 averages 60140 just behind, and the AMD Radeon Pro W6600M averages 61896, slightly ahead. The AMD Radeon PRO V710 averages 58657, a bit behind. In terms of raw throughput, the RTX 4090 brings 16384 shading units, 128 RT cores, 512 tensor cores, 24 GB of GDDR6X on a 384-bit bus with 1.01 TB/s of bandwidth, and 82.58 TFLOPS of FP32 compute. Its PassMark G3D score of 38194 and 3DMark Steel Nomadinvestigators score of 9223 place it firmly in the upper tier of the database, which is why even a demanding preset like 4K Ultra comes within one frame of the threshold in a title of this age.

CPU and GPU Roles

The scaling data makes the division of labor clear: Downfall leans on the GPU as resolution rises, and the CPU matters most at the low end.

At 1920x1080, the Ultra preset averages 132 FPS. Moving to 2560x1440 Ultra drops the average to 94 FPS, and 4K Ultra falls to 59 FPS. That steady decline as pixel count quadruples from 1080p to 4K is the signature of GPU-bound behavior: the RTX 4090 is doing the heavy lifting, and the frame rate tracks its rendering capacity rather than the processor's ability to feed the game.

At the bottom of the resolution ladder the picture flips. At 1080p Low the system averages 314 FPS, a number no 2016 horror game can use meaningfully. Frame rates this high are typically gated by the CPU and the game engine itself, and the Ultra 7 155H's single-core performance, with a Cinebench R23 single-core score of 1743 and a Cinebench R15 single-core score of 255, is more than sufficient here. The gap between Low and Medium at 1080p is 57 FPS (314 down to 257), while the gap between Medium and Ultra is 125 FPS (257 down to 132), which shows preset effects dominate once the GPU stops being saturated.

Across presets at a fixed resolution, the pattern is consistent. At 4K the averages run 140, 114, 94, and 59 FPS for Low, Medium, High, and Ultra respectively. At 1440p they run 224, 184, 150, and 94. At 1080p they run 314, 257, 211, and 132. The percentage drop from Low to Ultra is roughly 58 percent at 4K, 58 percent at 1440p, and 58 percent at 1080p, indicating the game scales with settings in a predictable, linear fashion across the board. The Medium preset at 4K shows a minimum of 97 and a maximum of 131 FPS around its 114 FPS average, a tight spread that points to stable frame delivery rather than stuttery highs and lows.

FAQ

Q: Can this PC run Downfall at 4K?

A: Yes, at three of four presets. At 3840x2160 the averages are 140 FPS on Low, 114 FPS on Medium, 94 FPS on High, and 59 FPS on Ultra. Only Ultra misses the 60 FPS threshold, and only by a single frame.

Q: What is the best-looking setting combination that stays playable at 1080p?

A: Ultra at 1920x1080 averages 132 FPS, more than double the 60 FPS threshold, so maximum settings are fully available at that resolution.

Q: Is the CPU fast enough for this game?

A: Yes. The Core Ultra 7 155H sits in the 83rd percentile of all CPUs in the database, with a Cinebench R23 multi-core score of 15028 and a single-core score of 1743, and Downfall never pushes this pairing into a CPU-limited state at playable resolutions.

Q: Does the frame rate dip below 60 at any measured point?

A: The only recorded average below the threshold is 4K Ultra at 59 FPS. The only recorded minimum frame rate, 97 FPS at 4K Medium, stays well above 60.

Q: How much performance is gained by dropping from Ultra to High at 4K?

A: The average rises from 59 FPS to 94 FPS, a gain of 35 FPS, which crosses the playability line with room to spare.

Q: How does this combination rank against other tested pairings for this game?

A: It ranks 826 out of 3716 tested combinations, placing it in the top portion of the field for Downfall.

The Verdict

Yes, this PC runs Downfall, decisively, at essentially every sensible setting.

The verdict data confirms it. At 1920x1080, all four presets are playable and the best is Ultra at 132 FPS. At 2560x1440, all four presets are playable and the best is Ultra at 94 FPS. At 3840x2160, Low, Medium, and High are playable, with High delivering 94 FPS as the best playable option; Ultra at 59 FPS misses the 60 FPS cutoff by one frame. That single miss is the only blemish across twelve measured configurations.

For a horror game released in 2016, this is overkill hardware, and the numbers reflect it. A player wanting maximum image quality can sit at 1440p Ultra and enjoy a 94 FPS average, or drop to 4K High for the same 94 FPS average with a sharper image at the cost of the top preset. Players sensitive to frame pacing will appreciate the recorded 4K Medium range of 97 to 131 FPS, which never approaches the threshold even at its minimum.

Best Settings per Resolution

Based on the measured averages and the 60 FPS threshold:

  • 1920x1080: Ultra, at 132 FPS average. Lower presets (257 Medium, 314 Low) add nothing but headroom the game cannot use.
  • 2560x1440: Ultra, at 94 FPS average. High manages 150 FPS and Medium 184 FPS, but Ultra already clears the bar by over half again.
  • 3840x2160: High, at 94 FPS average. Ultra falls to 59 FPS, one frame short, so High is the most demanding preset that stays at or above 60 FPS. Medium at 114 FPS and Low at 140 FPS remain as fallbacks.

The practical takeaway: 4K High and 1440p Ultra deliver the same 94 FPS average, so the choice between them is purely about whether the player prefers resolution or preset fidelity.

How This Combo Ranks

This pairing ranks 826 out of 3716 combinations tested in Downfall, which places it comfortably in the upper quarter of the field. That position aligns with the individual component standings: the RTX 4090 sits in the 88th percentile of all GPUs and the Ultra 7 155H in the 83rd percentile of all CPUs, so the combination performs roughly where its parts suggest it should.

The ranking also contextualizes the one near-miss. A combination in the top quarter of the field still cannot hold 60 FPS at 4K Ultra in this title, which says more about the game's top-tier preset demanding disproportionate GPU resources at that pixel count than about any weakness in this hardware. With the GPU now marked end-of-life and succeeded by the GeForce 50 series, this configuration remains a strong performer in the recorded data, and for Downfall specifically it delivers playable frame rates in eleven of twelve measured configurations, missing only the single most demanding one by a single frame.