Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
482 FPS
Ultra 1080p Measured
202 FPS

1440p (2K / QHD)

Low 1440p Measured
345 FPS
Ultra 1440p Measured
144 FPS

4K (Ultra HD)

Low 4K Measured
214 FPS
Ultra 4K Measured
90 FPS
3.1ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 79,097
Graphics Card
Required 27,400
Your GPU 77,712

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 90 144 175 214
1440p QHD 144 231 282 345
1080p Full HD 202 324 395 482

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 324
1920x1080 Low 482
1920x1080 Medium 395
1920x1080 Ultra 202
2560x1440 High 231
2560x1440 Low 345
2560x1440 Medium 282
2560x1440 Ultra 144
3840x2160 High 144
3840x2160 Low 214
3840x2160 Medium 175
3840x2160 Ultra 90

Performance Analysis: Downfall on Your System

The Intel Core i9-14900K paired with the NVIDIA GeForce RTX 5090 D delivers extreme performance in Downfall, a horror title that demands both high frame rates and visual stability. Benchmark data shows this combination is not merely playable but overwhelmingly capable, with every tested resolution and preset clearing the 60 FPS threshold by a substantial margin. The measured results position this as a top-tier configuration for the game, ranking second out of 3,716 tested combos. For a title that relies on atmosphere and tension, the ability to run at maximum settings with high frame rates is a significant advantage, as the data reveals a consistent pattern of performance that scales predictably with resolution and graphical load.

Measured FPS Breakdown

At 1920x1080, the combo produces exceptional frame rates that far exceed the needs of any display. The Low preset yields an average of 482 FPS, which is the highest figure recorded across all settings at this resolution. Moving to Medium, the average drops to 395 FPS, with a minimum of 335 FPS and a maximum of 454 FPS, indicating a smooth experience with minimal variance. The High preset averages 324 FPS, while the Ultra preset, which applies the heaviest graphical load, still manages an average of 202 FPS. These numbers suggest that at 1080p, the GPU is not the limiting factor; instead, the CPU’s strong single-thread performance keeps the frame rate ceiling exceptionally high.

At 2560x1440, the performance remains incredibly strong, though the scaling from 1080p shows a predictable increase in GPU workload. The Low preset averages 345 FPS, while Medium delivers 282 FPS, with a minimum of 240 FPS and a maximum of 324 FPS. High settings drop to an average of 231 FPS, and Ultra brings the figure to 144 FPS. This resolution represents a sweet spot for high-refresh-rate gaming, as even the most demanding preset clears the playable threshold by more than double. The frame time consistency at Medium, with a minimum of 240 FPS, indicates that the hardware handles the added pixel count without introducing stutter or frame pacing issues.

At 3840x2160, or 4K, the performance is still remarkable, although the gap between presets widens due to the increased pixel throughput. The Low preset averages 214 FPS, which reflects the raw power of the RTX 5090 D. Medium settings produce an average of 175 FPS, with a minimum of 149 FPS and a maximum of 202 FPS, showcasing a tight frame range that suggests excellent optimization. High settings lower the average to 144 FPS, and Ultra—the most visually intensive option—still achieves an average of 90 FPS. This means that even at the highest resolution with maximum graphical fidelity, the combo maintains a frame rate well above the 60 FPS playable threshold, with enough headroom to ensure a fluid experience during intense horror sequences.

CPU and GPU Roles

The data reveals that the RTX 5090 D is the primary driver of performance in Downfall, particularly at higher resolutions where the GPU’s shading units and memory bandwidth come into play. The scaling between 1080p and 1440p shows a reduction in average FPS of roughly 30-40% across presets, which is typical for a GPU-bound scenario. For instance, at Ultra settings, the average drops from 202 FPS at 1080p to 144 FPS at 1440p, and further to 90 FPS at 4K. This consistent degradation points to the GPU handling the increased pixel count and texture detail, while the CPU’s role diminishes as resolution rises.

However, the Intel Core i9-14900K still plays a critical role at lower resolutions, where the frame rates exceed 300 FPS. At 1080p Low, the 482 FPS average suggests that the CPU’s high boost clock of 6.00 GHz and 32 threads prevent any bottleneck, allowing the GPU to operate near its full potential. The CPU’s benchmark scores, such as a Cinebench R23 multi-core score of 39,399.5 and a single-core score of 2,262.5, support its capability to feed frames quickly in less demanding settings. As resolution increases to 1440p and 4K, the GPU becomes the limiting factor, but the CPU’s performance still ensures that frame pacing remains stable, as evidenced by the minimum FPS figures at Medium settings.

The interaction between the two components is most evident in the Ultra preset at 4K, where the average FPS of 90 is likely constrained by the GPU’s compute throughput rather than CPU limitations. The RTX 5090 D’s FP32 performance of 104.8 TFLOPS and 32 GB of GDDR7 memory with a bandwidth of 1.79 TB/s provide ample resources for the game’s visual effects, but the sheer pixel workload at 3840x2160 ultimately dictates the frame rate. In contrast, at 1080p, the CPU’s strong single-thread performance, reflected in a Geekbench single-core score of 2,655, ensures that the GPU is never starved of data, resulting in the exceptionally high averages observed.

FAQ

*Q: Can this combo run Downfall at 4K Ultra settings without dropping below 60 FPS?*

A: Yes, the benchmark data shows an average of 90 FPS at 3840x2160 with Ultra settings, which is well above the 60 FPS playable threshold. The verdictByResolution confirms that Ultra is the best playable setting at this resolution, with the average FPS at that setting being 90.

Q: What is the highest average frame rate recorded across all tested settings?

A: The highest average frame rate is 482 FPS, achieved at 1920x1080 with Low settings. This figure represents the peak performance of the combo when the graphical load is minimized.

Q: How does the performance scale from 1080p to 4K at Medium settings?

A: At Medium settings, the average FPS drops from 395 at 1080p to 282 at 1440p and then to 175 at 4K. This represents a 55.7% reduction from 1080p to 4K, indicating that the GPU is the primary scaling factor as resolution increases.

Q: Is the frame rate consistent, or are there noticeable drops during gameplay?

A: The data includes minimum FPS figures for Medium settings at each resolution. At 1080p, the minimum is 335 FPS, at 1440p it is 240 FPS, and at 4K it is 149 FPS. These minimums are all far above the 60 FPS threshold, suggesting the frame rate remains stable without significant drops.

Q: Which resolution provides the best balance of visual quality and frame rate for a high-refresh-rate monitor?

A: At 2560x1440 with Ultra settings, the average FPS is 144, which aligns perfectly with a 144 Hz display. This combination offers maximum visual fidelity while maintaining a frame rate that matches common high-refresh-rate monitors.

Q: Does the CPU bottleneck the GPU at any resolution?

A: Benchmark results indicate that at 1080p Low, the average FPS reaches 482, suggesting the CPU’s performance is sufficient to avoid bottlenecking. At higher resolutions, the GPU becomes the limiting factor, but the CPU’s strong single-core score of 2,655 in Geekbench ensures it does not hinder frame delivery.

How This Combo Ranks

The combination of the Intel Core i9-14900K and NVIDIA GeForce RTX 5090 D ranks 2nd out of 3,716 tested combos in Downfall. This places it in the top percentile of all configurations, indicating that only one other hardware pairing delivers higher performance in this game. The GPU’s percentile of 92 against all GPUs and the CPU’s percentile of 95 against all CPUs both contribute to this exceptional ranking. The data suggests that this combo is nearly at the apex of what is achievable for this title, with the only better-performing combination likely featuring a marginally faster GPU or CPU pairing.

The rank is supported by the measured FPS data, which shows no weak points across any resolution or preset. At 4K Ultra, the combo still achieves 90 FPS, which is more than sufficient for a playable experience, while at 1080p Low, it exceeds 480 FPS. This consistent high performance across the board is why it secures the second position, as it does not trade off performance at one resolution for another. The combo’s ability to maintain high frame rates at 4K is particularly notable, as many configurations struggle at this resolution with demanding settings.

Similar Performance Alternatives

For the CPU, the nearest rival is the Intel Core i9-14900KF, which has an average benchmark score of 79,371 compared to the 14900K’s 79,097, a delta of -0.3%. This means the KF variant performs essentially identically, with a negligible difference that would not be perceptible in Downfall. The Intel Core Ultra 9 290HX Plus is also close, with an average score of 79,574 and a delta of -0.6%, indicating it would produce nearly the same frame rates. The AMD EPYC 7413, despite being a server chip, has a score of 80,041 (delta -1.2%), but its architecture is less suited for gaming, so real-world performance may differ. The AMD Ryzen AI Max+ 395, with a score of 77,740 and a delta of 1.7%, would be slightly slower but still in the same performance tier.

On the GPU side, the AMD Radeon RX 6650M XT is listed as a rival with an average score of 76,904 and a delta of 1.1%, suggesting it is marginally slower than the RTX 5090 D. The AMD Radeon RX 6850M XT has a score of 78,940 and a delta of -1.6%, making it slightly faster in synthetic benchmarks. However, these are mobile GPUs, so their desktop equivalents would be more relevant. The NVIDIA Tesla P100 PCIe variants, with scores of 79,396 and 79,605 (deltas of -2.1% and -2.4%), are compute-focused cards that lack modern gaming features, so they are not practical alternatives for this game. In practice, any of these alternatives would deliver similar performance in Downfall, with differences of only a few percent in frame rates.

The Verdict

The benchmark data is unambiguous: this PC can run Downfall at every tested resolution and preset with frame rates far exceeding the 60 FPS playable threshold. At 1920x1080, the best settings are Ultra, with an average FPS of 202, providing a flawless experience on any monitor. At 2560x1440, Ultra settings yield an average of 144 FPS, which is ideal for high-refresh-rate displays. At 3840x2160, the Ultra preset still delivers an average of 90 FPS, meaning that even at 4K, the game runs smoothly with maximum visual quality.

The verdictByResolution data confirms that all playable settings—High, Low, Medium, and Ultra—clear the 60 FPS threshold at every resolution. The best setting at 4K is Ultra, with an average of 90 FPS, at 1440p it is Ultra with 144 FPS, and at 1080p it is Ultra with 202 FPS. This means the hardware has enough headroom to handle future updates or more demanding scenes without dropping below playable frame rates. For a horror game like Downfall, where immersion is key, this combo provides both the visual fidelity and the performance stability needed for an unbroken, tense experience. The only consideration is that such high frame rates may exceed the refresh rate of many displays, so enabling a frame rate limiter or V-Sync would be advisable to avoid screen tearing, though the hardware itself is never the bottleneck.