Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
312 FPS
Ultra 1080p Measured
132 FPS

1440p (2K / QHD)

Low 1440p Measured
219 FPS
Ultra 1440p Measured
95 FPS

4K (Ultra HD)

Low 4K Measured
141 FPS
Ultra 4K Measured
56 FPS
4.8ms Frame Time
7ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 70,163
Graphics Card
Required 27,400
Your GPU 41,187

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 56 91 115 141
1440p QHD 95 150 181 219
1080p Full HD 132 208 255 312

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 208
1920x1080 Low 312
1920x1080 Medium 255
1920x1080 Ultra 132
2560x1440 High 150
2560x1440 Low 219
2560x1440 Medium 181
2560x1440 Ultra 95
3840x2160 High 91
3840x2160 Low 141
3840x2160 Medium 115
3840x2160 Ultra 56

Performance Analysis: Downfall on Your System

The Intel Core i7-14700KF paired with the NVIDIA GeForce RTX 3080 Ti delivers a consistently high-refresh-rate experience in Downfall, with the data showing that the combination is capable of clearing 60 FPS at every tested resolution and preset, including 4K Ultra. Benchmark results indicate this is a very strong pairing for this horror title, though the gap between Ultra and lower presets at 4K is substantial and worth planning around.

Measured FPS Breakdown

The measured FPS data for this combo covers three resolutions and four quality presets, providing a clear picture of performance scaling. At 1920x1080, the frame rates are exceptionally high across the board. The Low preset produces an average of 312.4 FPS, Medium reaches 254.7 FPS, and High sits at 208.1 FPS. Even the most demanding Ultra preset at 1080p maintains an average of 131.7 FPS, which is more than double the 60 FPS playable threshold. This resolution is clearly where the RTX 3080 Ti’s 12 GB of GDDR6X memory and 10240 shading units are least taxed, leaving the CPU to do much of the work.

Moving to 2560x1440, the averages remain very strong but begin to show the GPU’s load increasing. Low delivers 219.3 FPS, Medium drops to 181.2 FPS, and High still manages 150.2 FPS. The Ultra preset at 1440p produces 95 FPS on average, which is a significant step down from High but still well above the 60 FPS threshold. The scaling from 1080p to 1440p is roughly linear for the lower presets, but the Ultra preset sees a steeper drop, suggesting that the combination of higher resolution and maximum settings starts to strain the GPU’s memory bandwidth and shading throughput.

At 3840x2160, the performance curve flattens considerably. The Low preset averages 140.5 FPS, which is still very playable, and Medium follows at 115.2 FPS. High drops to 91.2 FPS, which is comfortable for a 60 Hz or even 90 Hz display. The critical outlier is Ultra at 4K, which averages only 56.2 FPS, falling just below the 60 FPS playable threshold. This is the only tested configuration that fails to clear the bar, indicating that the game’s Ultra settings at 4K introduce a rendering cost that the RTX 3080 Ti cannot fully absorb. The data does not include min or max FPS values, so the analysis relies purely on average frame rates, but the averages alone show a clear hierarchy.

CPU and GPU Roles

The division of labor between the Core i7-14700KF and the RTX 3080 Ti shifts predictably as resolution increases. At 1920x1080, the CPU’s 20 cores and 28 threads are more likely to be the limiting factor, given that the GPU can push frame rates well above 200 FPS on lower presets. The 14700KF’s strong single-thread performance, reflected in a Geekbench single-core score of 2578 and a Cinebench R23 single-core score of 6235, helps sustain these high averages. The difference between Low (312.4 FPS) and Ultra (131.7 FPS) at 1080p is a 2.37x reduction, which is primarily driven by GPU-side effects like increased shading complexity and texture filtering, but the CPU still has headroom to feed the GPU at these rates.

At 2560x1440, the GPU begins to take a more prominent role. The drop from Low to Ultra is 219.3 FPS down to 95 FPS, a 2.31x reduction, which is similar to 1080p. However, the absolute frame rates are lower, indicating that the GPU is working harder to fill the additional pixels. The 14700KF’s 33 MB of shared L3 cache and 125 W TDP are sufficient to avoid bottlenecking at these rates, and the CPU’s 94th percentile ranking among all tested CPUs supports this. The data suggests that at 1440p, the RTX 3080 Ti is the primary driver of performance differences between presets, while the CPU remains capable of keeping up.

At 3840x2160, the GPU is unambiguously the bottleneck. The scaling from Low (140.5 FPS) to Ultra (56.2 FPS) is a 2.50x reduction, but the absolute numbers are much lower than at lower resolutions. The RTX 3080 Ti’s 912.4 GB/s memory bandwidth and 34.10 TFLOPS FP32 throughput are being pushed to their limits at 4K Ultra. The CPU’s role diminishes because the frame rate is capped by the GPU’s pixel output rate of 186.5 GPixel/s and texture rate of 532.8 GTexel/s. Benchmark results indicate that the 14700KF is not the limiting factor here; even a weaker CPU would likely produce similar 4K Ultra results, whereas at 1080p Low, a faster CPU could potentially push the average above 312.4 FPS.

Best Settings per Resolution

For each resolution, the best settings are defined as the most demanding preset that still maintains an average of at least 60 FPS. At 1920x1080, the Ultra preset is the clear choice, with an average of 131.7 FPS. This is well above the playable threshold and leaves ample headroom for drops during intense scenes, even without min FPS data. At 2560x1440, Ultra also qualifies, averaging 95 FPS. This is a comfortable margin over 60 FPS, making it safe to run maximum settings on a 1440p display. At 3840x2160, the Ultra preset fails to hit the threshold with 56.2 FPS, so the best playable setting is High, which averages 91.2 FPS. This provides a solid 4K experience, though users with 120 Hz or higher 4K displays will need to consider Medium (115.2 FPS) or Low (140.5 FPS) if they prioritize refresh rate over visual fidelity. The data shows a clear rule: 1080p and 1440p users can max out the game, while 4K users should stick to High or lower.

How This Combo Ranks

In the overall database of tested combinations, this pairing of the Intel Core i7-14700KF and NVIDIA GeForce RTX 3080 Ti ranks 949th out of 3716 combos for Downfall. This places it in the top 25.5% of all tested systems, which is a strong showing for a game released in 2016. The combo rank reflects the balance between CPU and GPU, and the data indicates that neither component is severely underpowered for this title. The CPU’s nearest rival, the AMD Ryzen 7 9700F, has an average benchmark score of 69996 versus the 14700KF’s 70163, a delta of only 0.2%, meaning the Intel chip offers virtually identical synthetic performance. The GPU’s nearest rival, the AMD Radeon Pro 5300, scores 40870 versus the RTX 3080 Ti’s 41187, a delta of 0.8%, so the NVIDIA card is slightly ahead in raw compute. The rank of 949 suggests that there are many higher-performing combos, likely featuring newer GPUs like the RTX 5070 (which scores 40377, about 2% lower than the 3080 Ti in synthetic tests), but this combo still delivers excellent real-world frame rates in Downfall.

FAQ

Q: Can this PC run Downfall at 4K Ultra settings?

A: No, the data shows an average of 56.2 FPS at 3840x2160 Ultra, which falls below the 60 FPS playable threshold. The best playable 4K preset is High, averaging 91.2 FPS.

Q: What is the highest playable preset at 2560x1440?

A: Ultra is playable at 1440p, with an average of 95 FPS. This is the most demanding preset that stays above 60 FPS at this resolution.

Q: How much performance is lost when going from 1080p to 4K at the same settings?

A: At Low settings, the drop is from 312.4 FPS at 1080p to 140.5 FPS at 4K, a reduction of roughly 55%. At High settings, the drop is from 208.1 FPS to 91.2 FPS, a similar percentage decrease.

Q: Is the CPU or GPU the limiting factor at 1920x1080?

A: At 1080p, the GPU is likely the primary limiter on Ultra settings, but on Low settings, the CPU’s single-thread performance (Geekbench single-core score of 2578) becomes more relevant, as the RTX 3080 Ti can push frame rates above 300 FPS.

Q: Does this combo rank higher than average in the database?

A: Yes, it ranks 949th out of 3716 combos, placing it in the top 25.5% of all tested systems for Downfall.

Q: What is the best 4K setting if I want a frame rate above 100 FPS?

A: Medium settings at 4K average 115.2 FPS, and Low averages 140.5 FPS. High is also an option at 91.2 FPS, but it falls below 100 FPS.

The Verdict

The verdict is clear: this PC can run Downfall well at all tested resolutions, with one notable exception. At 1920x1080, every preset clears 60 FPS, with Ultra averaging 131.7 FPS — a superb experience for high-refresh monitors. At 2560x1440, all presets are also playable, with Ultra hitting 95 FPS on average, making it the best choice for 1440p users. At 3840x2160, the story changes: High is the best playable setting at 91.2 FPS, while Ultra drops to 56.2 FPS, just under the 60 FPS threshold. Users targeting 4K should avoid Ultra and stick to High or Medium, depending on their preference for visual detail versus frame rate headroom. The combination of the 14700KF’s strong multi-threaded performance (Cinebench R23 multi-core score of 44167) and the RTX 3080 Ti’s solid 4K capabilities makes this a versatile system for Downfall, but the Ultra preset at 4K is the only configuration that will require a settings reduction to maintain smooth gameplay.