Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

77%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
210 FPS
Ultra 1080p Measured
88 FPS

1440p (2K / QHD)

Low 1440p Measured
150 FPS
Ultra 1440p Measured
63 FPS

4K (Ultra HD)

Low 4K Measured
93 FPS
Ultra 4K Measured
39 FPS
7.1ms Frame Time
11ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 70,163
Graphics Card
Required 27,400
Your GPU 16,014

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 63 76 93
1440p QHD 63 101 123 150
1080p Full HD 88 141 172 210

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 141
1920x1080 Low 210
1920x1080 Medium 172
1920x1080 Ultra 88
2560x1440 High 101
2560x1440 Low 150
2560x1440 Medium 123
2560x1440 Ultra 63
3840x2160 High 63
3840x2160 Low 93
3840x2160 Medium 76
3840x2160 Ultra 39

Performance Analysis: Downfall on Your System

The Intel Core i7-14700KF paired with the AMD Radeon RX 9060 delivers a robust gaming experience in Downfall, a horror title that clearly favors high refresh rates at standard resolutions. Benchmark data for this combination shows that at 1920x1080, the system achieves an average of 210 FPS on Low settings and remains above 140 FPS even on High, indicating substantial headroom for competitive or high-refresh displays. At 2560x1440, the combo sustains an average of 123 FPS on Medium and still clears 100 FPS on High, while 4K Ultra dips to 39 FPS, making the highest preset impractical for smooth play. The measured results confirm that this is a well-balanced pairing for 1080p and 1440p gaming, with 4K viability limited to Medium or High presets.

Measured FPS Breakdown

The measured FPS data for this Intel Core i7-14700KF and AMD Radeon RX 9060 combination spans three resolutions and four quality presets, providing a clear picture of performance scaling.

At 3840x2160, the system delivers an average of 63 FPS on High settings, which exactly meets the 60 FPS playability threshold. Dropping to Medium improves the average to 76 FPS, with a minimum of 65 FPS and a maximum of 88 FPS, offering a stable experience with minimal frame dips. Low settings push the average to 93 FPS, while Ultra falls to 39 FPS, rendering that preset unplayable at this resolution. The gap between Medium and Ultra is substantial, with a 37 FPS difference, indicating that the Ultra preset imposes a significant rendering load that this GPU cannot handle smoothly at 4K.

At 2560x1440, performance becomes more comfortable. The Ultra preset averages 63 FPS, again hitting the playability threshold exactly, while High reaches 101 FPS and Medium averages 123 FPS with a minimum of 104 FPS and a maximum of 141 FPS. Low settings produce an average of 150 FPS. The scaling from 4K to 1440p is notable: Ultra improves from 39 FPS to 63 FPS, a 24 FPS gain, while High jumps from 63 FPS to 101 FPS, a 38 FPS increase. This suggests that at 1440p, the GPU has enough bandwidth to handle even the most demanding preset without dropping below the 60 FPS floor.

At 1920x1080, the system shows its strongest performance. Low settings average 210 FPS, Medium averages 172 FPS with a minimum of 146 FPS and a maximum of 198 FPS, High averages 141 FPS, and Ultra averages 88 FPS. All presets clear the 60 FPS threshold by a wide margin, with even the most demanding Ultra setting maintaining a comfortable 28 FPS buffer above the playability limit. The minimum frame rate on Medium, 146 FPS, is higher than the average Ultra score at 1440p, demonstrating how resolution scaling affects the GPU’s ability to sustain high frame rates.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU provide context for how this combo compares to other hardware pairings.

For the Intel Core i7-14700KF, the closest alternatives are the AMD Ryzen 7 9700F, AMD Ryzen 9 7940HX, AMD Ryzen 9 7950X, and Intel Core Ultra 7 265K. The Ryzen 7 9700F has an average benchmark score of 69996, which is 0.2% lower than the i7-14700KF’s 70163 average. The Ryzen 9 7940HX scores 69875, 0.4% lower, while the Ryzen 9 7950X scores 69515, 0.9% lower. The Intel Core Ultra 7 265K scores 70879, which is 1% higher, making it the only rival in this group that outperforms the i7-14700KF. In practice, these deltas are small enough that gaming performance in Downfall would be nearly identical across all four CPUs, as the game’s frame rates are likely GPU-bound at most settings.

For the AMD Radeon RX 9060, the nearest rivals include the NVIDIA GeForce RTX 3060 Ti, AMD Radeon R9 370X, AMD Radeon RX 7700, and AMD Radeon Pro W5500. The RTX 3060 Ti has an average score of 16129, which is 0.7% higher than the RX 9060’s 16014 average, indicating near-identical performance. The R9 370X scores 15862, 1% lower, while the RX 7700 scores 15852, also 1% lower. The Radeon Pro W5500 scores 15679, 2.1% lower. These small deltas mean that users with any of these GPUs would experience similar frame rates in Downfall, though the RX 9060’s RDNA 4.0 architecture may offer different power efficiency characteristics that are not reflected in raw benchmark scores.

Best Settings per Resolution

The optimal preset for maintaining at least 60 FPS at each resolution is determined by the measured data.

At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, which averages 63 FPS. Medium also qualifies with an average of 76 FPS, but High offers better visual quality while still meeting the threshold. Ultra fails at 39 FPS, so it is not recommended. Low is playable at 93 FPS but sacrifices too much visual fidelity for the modest performance gain over High.

At 2560x1440, the best setting is Ultra, which averages exactly 63 FPS. This is noteworthy because it allows users to enable the highest quality preset while still maintaining smooth gameplay. High averages 101 FPS and Medium 123 FPS, but the Ultra preset provides the full visual experience without dropping below the 60 FPS floor.

At 1920x1080, Ultra is again the best choice, averaging 88 FPS. This provides a 28 FPS buffer above the playability threshold, ensuring consistent performance. High, Medium, and Low all exceed 140 FPS, but Ultra delivers the best image quality while remaining comfortably playable.

The Verdict

This PC can run Downfall at all three tested resolutions, but the playable settings vary significantly by resolution.

At 3840x2160, the system clears 60 FPS on High, Low, and Medium presets, with Ultra falling below the threshold at 39 FPS. The verdict data confirms that High is the best playable setting, achieving 63 FPS on average. Users targeting 4K should stick to High or Medium for a smooth experience.

At 2560x1440, all four presets are playable, including Ultra at 63 FPS. This makes 1440p the sweet spot for this combo, as it offers the full range of visual settings without compromising frame rate. High at 101 FPS and Medium at 123 FPS provide additional headroom for users who prefer higher refresh rates.

At 1920x1080, every preset clears 60 FPS, with Ultra averaging 88 FPS and Low reaching 210 FPS. This resolution is ideal for high-refresh displays, as even the most demanding setting maintains a solid frame rate. The system is fully capable of handling this horror title at 1080p without any performance concerns.

CPU and GPU Roles

The relative importance of the CPU and GPU in Downfall varies by resolution and preset, as evidenced by the scaling patterns in the measured data.

At 3840x2160, the GPU is clearly the dominant factor. The large performance gap between Medium (76 FPS) and Ultra (39 FPS) indicates that the GPU’s rendering capabilities are the primary constraint at this resolution. The CPU’s 20 cores and 28 threads provide ample processing power, but the RX 9060’s 8 GB of GDDR6 memory and 128-bit bus are taxed heavily at 4K, particularly with the demanding Ultra preset. The 37 FPS drop from Medium to Ultra suggests that the GPU’s memory bandwidth is a limiting factor, rather than any CPU bottleneck.

At 2560x1440, the balance shifts slightly. The Ultra preset achieves 63 FPS, which is the same as the 4K High score, indicating that the GPU is still the main constraint. However, the CPU’s role becomes more relevant at lower resolutions, as the higher frame rates (150 FPS on Low) require the i7-14700KF to feed the GPU with enough draw calls and geometry data. The i7-14700KF’s 5.60 GHz boost clock and strong single-threaded performance help sustain these high frame rates without introducing CPU-bound stutters.

At 1920x1080, the CPU becomes more significant, though the GPU still handles the bulk of the workload. The 210 FPS average on Low settings approaches the CPU’s ability to issue rendering commands, and the i7-14700KF’s 28 threads ensure that background tasks do not interfere with game performance. The scaling from Low to Ultra (210 to 88 FPS) shows a 122 FPS drop, which is primarily GPU-driven, but the CPU’s contribution is evident in the ability to maintain high minimum frame rates, such as 146 FPS on Medium.

How This Combo Ranks

The Intel Core i7-14700KF and AMD Radeon RX 9060 combination ranks at 2185 out of 3716 tested combos in Downfall. This places the system in the 59th percentile of all tested configurations, meaning it outperforms more than half of the other CPU-GPU pairings in the benchmark database. The percentile ranking for the GPU alone is 59, while the CPU ranks in the 94th percentile, indicating that the processor is a stronger component relative to its peers than the graphics card.

This ranking suggests that the combo is well-suited for mainstream gaming at 1080p and 1440p, but it is not at the top tier for 4K performance. The CPU's high percentile (94) does not translate to a top-tier gaming ranking because the GPU's 59th percentile score limits overall performance in graphically demanding titles like Downfall. Users seeking higher 4K frame rates would need a more powerful GPU, while those focused on 1080p or 1440p gaming will find this combination adequate for most presets.

FAQ

Q: What is the highest playable setting for Downfall at 4K with this combo?

A: At 3840x2160, the High preset is the most demanding playable option, averaging 63 FPS. Medium is also playable at 76 FPS, but Ultra falls below the 60 FPS threshold at 39 FPS.

Q: Can this system run Downfall at 1440p on Ultra settings?

A: Yes, the Ultra preset at 2560x1440 averages 63 FPS, which meets the 60 FPS playability threshold. This makes 1440p the only resolution where all four presets are playable.

Q: How does the RX 9060 compare to the RTX 3060 Ti in raw benchmark scores?

A: The RX 9060 has an average benchmark score of 16014, while the RTX 3060 Ti scores 16129, a 0.7% difference. This indicates nearly identical performance between the two GPUs.

Q: What is the average FPS for Low settings at 1080p?

A: At 1920x1080 with Low settings, the system achieves an average of 210 FPS, which is the highest score recorded across all tested resolutions and presets.

Q: Is the CPU or GPU more important for performance at 1080p?

A: At 1920x1080, the GPU remains the primary factor, but the CPU's role increases due to higher frame rates. The i7-14700KF's strong single-threaded performance helps sustain 210 FPS on Low, while the GPU still drives the scaling from Low to Ultra.

Q: What is the system's ranking among all tested combos in Downfall?

A: The combo ranks 2185 out of 3716 tested combinations, placing it in the 59th percentile. The CPU ranks in the 94th percentile, while the GPU ranks in the 59th percentile.