Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 62 | 102 | 125 | 152 |
| 1440p QHD | 99 | 163 | 197 | 243 |
| 1080p Full HD | 141 | 229 | 277 | 335 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The Intel Core i7-13700K paired with the AMD Radeon RX 7900 XT delivers a decisive performance victory in Downfall, clearing the 60 FPS threshold at every resolution and preset combination tested. The data shows that this configuration is not merely playable but overwhelmingly powerful for this title, with the most demanding Ultra preset at 4K still holding an average of 61.5 FPS. Across all twelve measured points, the lowest average frame rate recorded is 61.5 FPS, meaning there is no scenario in this dataset where the system dips below the playable threshold. This combination ranks in the 81st percentile of all 3,716 tested hardware combos for this game, placing it comfortably in the upper tier of systems.
Measured FPS Breakdown
The measured performance data reveals a consistent and substantial margin of headroom across all settings. At 1920x1080, the system operates at exceptionally high frame rates, beginning with a 334.8 FPS average on Low settings. Medium settings at this resolution produce a 276.8 FPS average, while High settings reach 228.5 FPS. The Ultra preset, which is the most demanding configuration, still delivers a robust 140.6 FPS average at 1080p. These figures demonstrate that at standard Full HD resolution, the CPU and GPU combination is barely taxed, with even the heaviest settings leaving more than double the required performance headroom for a 60 FPS target.
Moving to 2560x1440, the performance scaling remains equally impressive. Low settings produce a 242.9 FPS average, Medium settings yield 197.2 FPS, and High settings maintain a 162.6 FPS average. The Ultra preset at 1440p drops to a 98.8 FPS average, which still represents a 64.7% margin above the 60 FPS playable threshold. The transition from 1080p to 1440p shows an expected performance cost, but the reductions are modest: Ultra settings lose approximately 41.8 FPS, while Low settings lose about 91.9 FPS. This indicates that the system scales gracefully with resolution increases, maintaining high playability throughout.
At 3840x2160, the system continues to deliver strong results. Low settings produce a 151.8 FPS average, Medium settings reach 124.8 FPS, and High settings maintain 101.6 FPS. The Ultra preset at 4K is the only configuration in the entire dataset that approaches the 60 FPS threshold, with an average of 61.5 FPS. While this is technically above the playable mark, it leaves only a 2.5% buffer above the threshold, suggesting that any additional background load or thermally induced variability could push it below 60 FPS. The scaling from 1440p Ultra (98.8 FPS) to 4K Ultra (61.5 FPS) represents a 37.7% performance reduction, which is a substantial drop but consistent with the increased pixel count demands of 4K rendering.
The settings scaling within each resolution follows a predictable pattern. At every resolution, Low to Medium provides a significant frame rate increase, while High to Ultra shows the largest performance penalty. For example, at 1080p, moving from High (228.5 FPS) to Ultra (140.6 FPS) costs 87.9 FPS, whereas moving from Low (334.8 FPS) to Medium (276.8 FPS) costs only 58.0 FPS. This pattern holds across all resolutions, indicating that the Ultra preset includes effects that are disproportionately expensive relative to their visual impact in this horror title.
Similar Performance Alternatives
The nearest rivals for the Intel Core i7-13700K, based on average benchmark scores, provide context for its processing capabilities. The AMD Ryzen 9 5900 sits 0.2% below the i7-13700K's average score, making it effectively equivalent in overall CPU performance. The AMD Ryzen AI 9 HX PRO 375 is 0.3% slower, while the AMD Ryzen 9 7845HX is 0.5% faster and the Intel Xeon w3-2535 matches that 0.5% advantage. These delta percentages are all within a narrow band of less than one percent, meaning that swapping the i7-13700K for any of these processors would yield virtually identical frame rates in Downfall, given the same GPU. The game's modest CPU demands, evidenced by the high frame rates at 1080p, suggest that any of these near-identical alternatives would maintain the same playability conclusions.
For the AMD Radeon RX 7900 XT, the nearest rivals show a more varied picture. The AMD Radeon 660M is 0.5% slower, the NVIDIA RTX A2000 Mobile matches that 0.5% deficit, and the AMD Radeon RX 570X is 0.9% slower. Interestingly, the AMD Radeon RX 9070 XT is 1.5% faster than the RX 7900 XT in average benchmark scores. However, these comparisons are based on aggregate benchmark averages, not game-specific data. The RX 7900 XT's raw specifications, including its 800.0 GB/s memory bandwidth and 51.48 TFLOPS FP32 performance, place it in a category where slight percentage differences in synthetic benchmarks may not translate to perceptible differences in Downfall's frame rates. The data indicates that any of these rival GPUs would produce similar, though not identical, results, with the RX 9070 XT potentially offering a marginal improvement and the RX 570X a slight reduction in performance.
FAQ
*Q: Can this system run Downfall at 4K Ultra settings?*
A: Yes, the data shows an average of 61.5 FPS at 3840x2160 Ultra settings, which clears the 60 FPS playable threshold. However, this is the only configuration in the dataset with a margin below 2.5%, so performance is close to the boundary.
Q: What is the best preset to use at 1920x1080?
A: Ultra settings are fully playable at 1080p, producing an average of 140.6 FPS. This is more than double the 60 FPS threshold, so there is no need to compromise on visual quality at this resolution.
Q: How much performance is lost when moving from 1440p to 4K at Ultra settings?
A: The average frame rate drops from 98.8 FPS at 2560x1440 Ultra to 61.5 FPS at 3840x2160 Ultra, representing a 37.7% reduction. This is a substantial loss but still leaves the system above the playable threshold.
Q: Which component is more important for this game at 4K?
A: The data indicates that the GPU is the limiting factor at 4K, as the CPU has sufficient headroom to maintain high frame rates at lower resolutions. The significant drop from 1440p to 4K suggests the RX 7900 XT is the primary driver of performance at this resolution.
Q: Is the low preset noticeably faster than the high preset?
A: Yes, the Low preset is significantly faster than High at every resolution. At 1080p, Low averages 334.8 FPS versus 228.5 FPS for High; at 1440p, 242.9 FPS versus 162.6 FPS; and at 4K, 151.8 FPS versus 101.6 FPS.
Q: Does the system ever drop below 60 FPS in the measured data?
A: No. The lowest average frame rate recorded across all twelve tested configurations is 61.5 FPS at 4K Ultra. Every other setting and resolution combination produces an average of at least 98.8 FPS.
The Verdict
The verdict is unambiguous: this PC can run Downfall at every resolution and preset combination included in the dataset. The verdictByResolution data confirms that all four settings levels—Low, Medium, High, and Ultra—are playable at 1920x1080, 2560x1440, and 3840x2160. The best settings at 4K are Ultra, with an average of 61.5 FPS, which barely clears the 60 FPS threshold. At 1440p, the best settings are also Ultra, producing a more comfortable 98.8 FPS average. At 1080p, Ultra settings deliver a commanding 140.6 FPS average, making it the clear choice for maximizing visual quality without any performance concerns.
For users prioritizing a strict 60 FPS lock, the 4K Ultra preset is the only configuration that requires attention. The 61.5 FPS average leaves only a 1.5 FPS margin, so enabling v-sync or frame pacing could occasionally result in drops below 60 FPS in demanding scenes. The data suggests that High settings at 4K (101.6 FPS) provide a more secure buffer for consistent 60 FPS gameplay, though Ultra remains technically playable. At 1440p and below, all presets offer such substantial margins above 60 FPS that any of them can be safely selected without fear of dropping below the threshold.
CPU and GPU Roles
The performance scaling between resolutions and presets reveals distinct roles for the CPU and GPU in Downfall. At 1920x1080, the frame rates are exceptionally high across all settings, ranging from 140.6 FPS at Ultra to 334.8 FPS at Low. These figures suggest that the CPU, with its 16 cores and 24 threads, provides ample processing power to drive the GPU to its limits. The i7-13700K's single-thread performance, evidenced by its 3DMark single-thread score of 1136 and Cinebench R23 single-core score of 2116, is more than sufficient for this horror title's typical draw call and physics workloads.
As resolution increases to 2560x1440 and then 3840x2160, the frame rates drop proportionally across all settings, indicating that the GPU becomes the primary bottleneck. The RX 7900 XT's rendering workload scales directly with pixel count, and the data shows this scaling: at Low settings, frame rates drop from 334.8 FPS at 1080p to 242.9 FPS at 1440p to 151.8 FPS at 4K. This consistent reduction across settings confirms that the GPU is the limiting factor at higher resolutions, while the CPU maintains its ability to feed the GPU without becoming a constraint.
The setting-level scaling further clarifies the GPU's dominant role. The gap between Low and Ultra presets widens as resolution increases: at 1080p, the difference is 194.2 FPS (334.8 vs 140.6); at 1440p, the difference is 144.1 FPS (242.9 vs 98.8); and at 4K, the difference is 90.3 FPS (151.8 vs 61.5). This narrowing gap at higher resolutions indicates that the GPU is more heavily loaded, reducing the relative impact of settings changes. Conversely, the CPU's role is most pronounced at 1080p, where it must generate enough frames to keep the GPU fully occupied at rates exceeding 300 FPS.
Best Settings per Resolution
At 1920x1080, the Ultra preset is the recommended configuration, delivering a 140.6 FPS average. This is the most demanding setting available, and it maintains a 134.3% margin above the 60 FPS threshold. There is no reason to select lower presets at this resolution, as even the heaviest settings leave substantial headroom for smooth gameplay on high-refresh-rate displays.
For 2560x1440, Ultra settings again provide the best experience, with a 98.8 FPS average. This represents a 64.7% buffer above the playable threshold, ensuring consistent performance even during intense horror sequences with multiple light sources or particle effects. The 1440p Ultra configuration offers the best balance of visual fidelity and performance headroom, making it the sweet spot for this hardware combination.
At 3840x2160, Ultra settings are technically playable with a 61.5 FPS average, but the margin is thin. For users who prioritize a rock-solid 60 FPS experience, High settings at 101.6 FPS provide a 69.3% safety margin and are the safer choice. However, the data confirms that Ultra at 4K does clear the 60 FPS threshold, so users with adaptive sync displays or who are willing to accept occasional minor dips can select Ultra without violating the playability criterion. The choice at 4K ultimately depends on whether the user values maximum visual detail or guaranteed frame time consistency, with both options remaining above the 60 FPS line according to the measured averages.