Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

75%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
210 FPS
Ultra 1080p Measured
88 FPS

1440p (2K / QHD)

Low 1440p Measured
150 FPS
Ultra 1440p Measured
63 FPS

4K (Ultra HD)

Low 4K Measured
93 FPS
Ultra 4K Measured
39 FPS
7.1ms Frame Time
11ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 35,365
Graphics Card
Required 27,400
Your GPU 16,014

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 63 76 93
1440p QHD 63 101 123 150
1080p Full HD 88 141 172 210

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 141
1920x1080 Low 210
1920x1080 Medium 172
1920x1080 Ultra 88
2560x1440 High 101
2560x1440 Low 150
2560x1440 Medium 123
2560x1440 Ultra 63
3840x2160 High 63
3840x2160 Low 93
3840x2160 Medium 76
3840x2160 Ultra 39

Performance Analysis: Downfall on Your System

The Intel Core i7-12700KF paired with the AMD Radeon RX 9060 is a combination that has been measured in Downfall, a horror title from 2016. Benchmark data shows that this pairing delivers playable frame rates at 1080p and 1440p across all presets, while at 4K it clears the 60 FPS threshold on High, Medium, and Low settings. The CPU carries a launch MSRP of $384, and its performance profile places it in the 85th percentile of all CPUs, while the GPU sits in the 59th percentile of all GPUs. The following analysis breaks down how this combo performs, where its bottlenecks lie, and which settings to use.

Similar Performance Alternatives

The Intel Core i7-12700KF has an average benchmark score of 35,365. Its nearest rivals, based on aggregate scores, are the Intel Core i7-13700T (35,403, delta −0.1%), the Intel Core i5-13600T (35,305, delta +0.2%), the Intel Core 5 213PE (35,428, delta −0.2%), and the Intel Core i7-12700K (35,287, delta +0.2%). These deltas are all within a fraction of a percent, meaning that in practical terms, swapping the i7-12700KF for any of these chips would yield nearly identical frame rates in Downfall. The i7-12700KF and i7-12700K are essentially the same part with different power limits; the i7-13700T and i5-13600T are lower-power variants that still match the raw performance within measurement noise.

On the GPU side, the AMD Radeon RX 9060 posts an average benchmark score of 16,014. Its nearest rivals include the NVIDIA GeForce RTX 3060 Ti (16,129, delta −0.7%), the AMD Radeon R9 370X (15,862, delta +1.0%), the AMD Radeon RX 7700 (15,852, delta +1.0%), and the AMD Radeon Pro W5500 (15,679, delta +2.1%). The RX 9060 is within 2.1% of all four alternatives, so users with any of these GPUs would experience very similar performance in Downfall. The RTX 3060 Ti is the closest competitor, being only 0.7% slower on average. This means that the RX 9060's performance tier is well established: it sits in the upper mid-range, capable of handling modern titles at 1080p and 1440p but not a high-end 4K part.

CPU and GPU Roles

The measured FPS data across resolutions and presets reveals a clear division of labor. At 1920x1080, the combo achieves very high frame rates: 210 FPS on Low, 172 on Medium, 141 on High, and 88 on Ultra. At 2560x1440, those numbers drop to 150, 123, 101, and 63 respectively. At 3840x2160, they fall further to 93, 76, 63, and 39. The consistent drop from 1080p to 1440p to 4K, for every preset, indicates that the GPU is the primary bottleneck as resolution increases. For example, the High preset goes from 141 FPS at 1080p to 101 at 1440p and 63 at 4K — a 55% reduction from 1080p to 4K. This scaling pattern is typical of a GPU-bound scenario.

The CPU's role is less stressed. With a 85th percentile ranking, the i7-12700KF has ample headroom. At 1080p, even the most demanding Ultra preset yields 88 FPS, which is well above the 60 FPS threshold. If the CPU were the limiting factor, we would expect to see frame rates plateau across resolutions, but instead they scale directly with pixel count. The GPU's 59th percentile ranking and its 8 GB memory configuration suggest that it is the component that determines whether a given resolution and preset can hit 60 FPS. In Downfall, the game's horror atmosphere likely relies more on lighting and shadows than on complex CPU physics, so the GPU dominates the performance equation.

Measured FPS Breakdown

The following table lists all measured average frame rates, along with minimum and maximum values where available. Note that only the Medium preset recorded min/max data; other presets have null values.

| Resolution | Settings | Avg FPS | Min FPS | Max FPS |

|------------|----------|---------|---------|---------|

| 3840x2160 | High | 63 | — | — |

| 3840x2160 | Low | 93 | — | — |

| 3840x2160 | Medium | 76 | 65 | 88 |

| 3840x2160 | Ultra | 39 | — | — |

| 2560x1440 | High | 101 | — | — |

| 2560x1440 | Low | 150 | — | — |

| 2560x1440 | Medium | 123 | 104 | 141 |

| 2560x1440 | Ultra | 63 | — | — |

| 1920x1080 | High | 141 | — | — |

| 1920x1080 | Low | 210 | — | — |

| 1920x1080 | Medium | 172 | 146 | 198 |

| 1920x1080 | Ultra | 88 | — | — |

The data shows a smooth progression: at each resolution, Low is fastest, then Medium, then High, and Ultra is slowest. The only preset with recorded min/max values is Medium, which shows a tight band — at 4K, the range is 65 to 88 FPS, at 1440p it is 104 to 141, and at 1080p it is 146 to 198. These ranges indicate that the game's frame time variability is moderate, with the minimum still comfortably above 60 FPS at 1440p and 1080p, and at 4K the minimum of 65 FPS is just above the playable threshold.

The Verdict

Can this PC run Downfall? According to the measured data, yes, for most combinations of resolution and preset. The verdict by resolution is as follows:

  • 3840x2160: Playable settings are High (63 FPS), Low (93 FPS), and Medium (76 FPS). Ultra is not playable because it averages only 39 FPS. The best playable setting is High, with an average of 63 FPS.
  • 2560x1440: All four presets are playable — Low (150), Medium (123), High (101), and Ultra (63). The best setting is Ultra, which still averages 63 FPS.
  • 1920x1080: All presets are playable, with Ultra delivering 88 FPS, High 141, Medium 172, and Low 210. The best setting is Ultra at 88 FPS.

The 60 FPS threshold is cleared at every resolution except 4K Ultra. For users targeting 4K, the High preset provides exactly 63 FPS on average, which is sufficient but leaves little headroom for demanding scenes. At 1440p and 1080p, the system has substantial margin, making it a reliable performer for this horror title.

FAQ

Q: What is the best preset to use at 4K?

A: The High preset is the most demanding setting that stays at or above 60 FPS, with an average of 63 FPS. Ultra drops to 39 FPS and is not playable.

Q: How does the RX 9060 compare to its closest rival, the RTX 3060 Ti?

A: The RX 9060's average benchmark score is 16,014, while the RTX 3060 Ti scores 16,129, a delta of −0.7%. In practical terms, the two GPUs perform nearly identically.

Q: Does the CPU bottleneck the system at 1080p?

A: No. At 1080p, even the Ultra preset achieves 88 FPS, and the CPU ranks in the 85th percentile. The frame rate scaling from 1080p to 4K indicates the GPU is the limiting factor.

Q: What is the minimum FPS recorded at 1440p Medium?

A: The minimum FPS at 2560x1440 Medium is 104, with an average of 123 and a maximum of 141.

Q: Is this combo above average compared to other tested configurations?

A: The combo ranks 2185 out of 3716 tested combinations, meaning it is better than roughly 41% of all tested combos, placing it in the lower half of the field.

Q: Can the system handle 4K Ultra?

A: No. The average FPS at 4K Ultra is 39, which is well below the 60 FPS playable threshold. The High preset is the best option at 4K.

Best Settings per Resolution

The most demanding preset that remains at or above 60 FPS for each resolution, based on the verdict data, is:

  • 3840x2160: High — average 63 FPS
  • 2560x1440: Ultra — average 63 FPS
  • 1920x1080: Ultra — average 88 FPS

These are the settings that maximize visual quality while maintaining a playable frame rate. At 4K, High is the ceiling; at 1440p and 1080p, Ultra is fully playable with comfortable headroom. Users who prefer higher frame rates can step down to Medium or Low, but the above presets offer the best balance of fidelity and performance.

How This Combo Ranks

In the database of tested CPU/GPU combinations for Downfall, this pairing holds the rank of 2185 out of 3716. That places it in the lower half of all tested configurations — better than 1,531 combinations and worse than 2,184. The ranking reflects the GPU's mid-range position (59th percentile) and the CPU's strong showing (85th percentile). While the CPU is a high-end part, the GPU limits the overall performance tier. The result is a system that can comfortably play Downfall at 1080p and 1440p with maximum settings, and at 4K with High settings, but it does not reach the top tier of performance that would allow 4K Ultra or high-refresh 4K gaming. For users with this exact hardware, the data suggests that staying at 1440p or below delivers the most consistent experience.