Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

97%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
366 FPS
Ultra 1080p Measured
155 FPS

1440p (2K / QHD)

Low 1440p Measured
260 FPS
Ultra 1440p Measured
110 FPS

4K (Ultra HD)

Low 4K Measured
162 FPS
Ultra 4K Measured
70 FPS
4ms Frame Time
6ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 35,287
Graphics Card
Required 27,400
Your GPU 44,795

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 70 109 131 162
1440p QHD 110 177 213 260
1080p Full HD 155 247 300 366

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 247
1920x1080 Low 366
1920x1080 Medium 300
1920x1080 Ultra 155
2560x1440 High 177
2560x1440 Low 260
2560x1440 Medium 213
2560x1440 Ultra 110
3840x2160 High 109
3840x2160 Low 162
3840x2160 Medium 131
3840x2160 Ultra 70

Performance Analysis: Downfall on Your System

The Intel Core i7-12700K paired with the NVIDIA GeForce RTX 4070 Ti delivers an emphatic "yes" for running Downfall, with benchmark data showing every tested resolution and preset combination clears the 60 FPS playability threshold with substantial headroom. At 4K Ultra, the most demanding configuration, the combo still averages 70.4 FPS, meaning this system is not merely capable but outright overqualified for this horror title across the board.

Measured FPS Breakdown

The measured FPS data reveals a system that scales predictably with resolution and settings, with no configuration dipping below the 60 FPS target. At 1920x1080, the lowest resolution tested, performance is exceptionally high. The Low preset averages 365.9 FPS, Medium reaches exactly 300 FPS, High delivers 247.3 FPS, and Ultra still produces 155.1 FPS. These numbers indicate that at 1080p, the system is heavily GPU-bound at lower presets but remains fluid even at maximum settings.

Moving to 2560x1440, the frame rates remain far above playable. Low settings produce an average of 260 FPS, Medium hits 213.4 FPS, High maintains 177.3 FPS, and Ultra drops to 109.8 FPS. The scaling from 1080p to 1440p shows a roughly 30% reduction in frame rate across similar presets, which is a typical pattern for a GPU-heavy workload where pixel count drives performance more than CPU capabilities.

At 3840x2160, the system still impresses. Low settings average 162.4 FPS, Medium achieves 131 FPS, High reaches 109 FPS, and Ultra settles at 70.4 FPS. The 4K Ultra result is the only configuration that approaches the 60 FPS threshold, but it stays comfortably above it with a 10.4 FPS margin. The transition from 1440p to 4K costs roughly 35-40% of the frame rate, again pointing to pixel throughput as the dominant factor.

Min and max FPS values are not recorded in the data, so the analysis relies solely on average frame rates. However, the consistency of the averages across all twelve tested configurations suggests stable performance without severe dips.

Similar Performance Alternatives

The CPU's nearest rivals, based on aggregate benchmark scores, are remarkably close in performance. The Intel Core i5-13600T scores 35305, which is only 0.1% lower than the i7-12700K's 35287 average. The Intel Core i7-12700KF is 0.2% behind at 35365, while the Intel Core i7-13700T trails by 0.3% with a score of 35403. The Intel Core 5 213PE completes the group at 35428, just 0.4% behind. These deltas are negligible in real-world gaming, meaning any of these CPUs would produce nearly identical frame rates in Downfall when paired with the same GPU. The i7-12700K sits at the 84th percentile among all CPUs, confirming it is a strong but not elite processor for this workload.

On the GPU side, the RTX 4070 Ti's nearest rivals show slightly larger variance. The NVIDIA GeForce RTX 5090 Mobile scores 45152, which is 0.8% below the RTX 4070 Ti's 44795 average. The AMD Radeon Pro 5500 XT is 1.3% behind at 45384, while the NVIDIA RTX A6000 is 1.6% ahead with a score of 44075. The Intel Arc A730M trails by 1.7% at 45592. These differences are small enough that swapping the GPU for any of these alternatives would yield visually indistinguishable performance in Downfall, though the RTX A6000 would offer a slight edge in compute-heavy scenes. The RTX 4070 Ti also sits at the 84th percentile among all GPUs, matching the CPU's relative standing.

CPU and GPU Roles

The data strongly indicates that the GPU is the primary performance driver in Downfall, with CPU influence diminishing as resolution increases. This is evident from the frame rate scaling between resolutions. At 1080p Low, the system produces 365.9 FPS, which is likely near the CPU's maximum gaming throughput for this title. The jump to 1440p Low reduces this to 260 FPS, a 29% drop, and 4K Low further reduces it to 162.4 FPS, another 37% reduction. If the CPU were the bottleneck, these reductions would be much smaller.

The settings scaling within each resolution reinforces this conclusion. At 1080p, moving from Low to Ultra costs 210.8 FPS (from 365.9 to 155.1), a 58% reduction that tracks closely with GPU workload increases. At 1440p, the same settings change costs 150.2 FPS (from 260 to 109.8), a 58% reduction. At 4K, the cost is 92 FPS (from 162.4 to 70.4), again a 57% reduction. The consistency of this percentage across resolutions confirms that the GPU is handling the rendering load proportionally, while the CPU maintains a steady baseline.

The i7-12700K's 12 cores and 20 threads, with a boost clock of 5.00 GHz, provide ample headroom for Downfall's engine. The 3DMark scores show strong multi-threaded performance (9276 in the 16-thread test) and solid single-thread capability (1043 in the single-thread test), but the game's frame rates suggest it does not stress the CPU to its limits. Even at 1080p Low, where CPU bottlenecks typically appear, the system still exceeds 360 FPS, indicating the processor is never the limiting factor. The verdict is clear: the RTX 4070 Ti is the component that determines playable settings, not the CPU.

The Verdict

Benchmark results confirm this PC can run Downfall at every tested resolution and preset. At 3840x2160, all four settings — Low, Medium, High, and Ultra — are playable, with Ultra averaging 70.4 FPS against the 60 FPS threshold. This makes 4K Ultra the recommended maximum, though the 10.4 FPS margin means there is little room for background processes or frame-time spikes.

At 2560x1440, the system offers significantly more headroom. Ultra settings produce 109.8 FPS, which is 83% above the playability threshold. This is the sweet spot for high-refresh-rate monitors, as the frame rate is sufficient for 100 Hz displays without compromise. At 1920x1080, performance is extraordinary, with Ultra delivering 155.1 FPS and Low exceeding 365 FPS. This resolution is ideal for competitive play or extreme refresh rates, but the GPU is clearly underutilized.

The playable settings list includes all options at every resolution, meaning there is no configuration in the data that fails the 60 FPS requirement. The only caveat is that 4K Ultra, while playable, does not leave the same margin as lower resolutions. Users prioritizing visual fidelity at 4K should feel confident, while those wanting to push refresh rates should target 1440p.

How This Combo Ranks

This CPU-GPU combination ranks 485th out of 3716 tested combos for Downfall, placing it in the top 13% of all systems evaluated. This rank reflects the balanced pairing of a strong 12th-gen Intel processor with a high-end Ada Lovelace GPU. The percentile scores for both components — 84th for the CPU and 84th for the GPU — are nearly identical, indicating a well-matched pairing where neither component significantly bottlenecks the other.

The rank suggests that while this system is far from the top of the leaderboard, it outperforms the vast majority of tested configurations. The 3716-combo pool includes many lower-end and mid-range systems, and the 485th position puts this build firmly in enthusiast territory. Systems ranked above it likely feature newer generation GPUs like the RTX 4090 or RTX 5080, but the practical difference in Downfall is minimal given that this combo already maxes out the game at all resolutions.

Best Settings per Resolution

The data identifies the most demanding preset that maintains at least 60 FPS at each resolution, and in every case, that is Ultra. At 3840x2160, Ultra runs at 70.4 FPS average, which clears the threshold but with the smallest margin. This is the recommended setting for 4K displays, as it provides the full visual experience while staying playable. Users who prefer extra stability could drop to High at 109 FPS, but the data does not indicate any need to do so.

At 2560x1440, Ultra runs at 109.8 FPS, providing a comfortable buffer above 60 FPS. This is the ideal resolution for this system, as it balances visual quality with high frame rates suitable for 100 Hz or 120 Hz monitors. At 1920x1080, Ultra runs at 155.1 FPS, which is more than double the playability threshold. This resolution is best for users with high-refresh-rate displays, as the system can easily drive 144 Hz or even 165 Hz panels at maximum settings.

In all cases, the "best settings" designation points to Ultra, and the measured FPS values show no configuration in the dataset falls below the 60 FPS line. The system's performance headroom is substantial enough that users can enable maximum settings at any resolution without concern for playability.