Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 68 | 109 | 133 | 163 |
| 1440p QHD | 110 | 176 | 214 | 242 |
| 1080p Full HD | 154 | 235 | 252 | 271 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
Measured FPS Breakdown
At 3840x2160, the recorded data shows a wide spread between the Low and Ultra presets. Low settings produce an average of 163 FPS, while Medium drops to 133 FPS with a minimum of 113 FPS and a maximum of 153 FPS. High settings average 109 FPS, and Ultra falls to 68 FPS. The frame time consistency at Medium, with a 40 FPS spread between minimum and maximum, suggests the GPU is managing the load steadily at 4K.
Moving to 2560x1440, the pattern shifts upward substantially. Low settings reach 242 FPS average, Medium hits 214 FPS with a minimum of 182 FPS and a maximum of 246 FPS, and High averages 176 FPS. Ultra still clears the playable threshold by a large margin, averaging 110 FPS. The delta between Low and Ultra at this resolution is 132 FPS, which is a larger absolute gap than at 4K, indicating that the lower pixel count lets the GPU stretch further before hitting any bottleneck.
At 1920x1080, the results are the highest of the three resolutions. Low averages 271 FPS, Medium averages 252 FPS with a minimum of 214 FPS and a maximum of 290 FPS, and High averages 235 FPS. Ultra averages 154 FPS. The Medium preset shows a 76 FPS range between minimum and maximum, the widest recorded spread in the entire dataset, which points to occasional frame spikes even at 1080p. Still, every preset at this resolution stays far above the playable threshold.
The data shows that Ultra is the only preset at 4K that drops below the 100 FPS mark, and even then it remains playable. The minimum FPS values are only recorded for the Medium preset at each resolution, so the database does not capture worst-case frames for High, Low, or Ultra. For those presets, only averages are available, meaning the analysis of frame pacing relies on the Medium preset's min-max range.
CPU and GPU Roles
The Intel Core i5-9400 is a six-core, six-thread processor from the Coffee Lake family, with a base clock of 2.90 GHz and a boost clock of 4.10 GHz. Its benchmark scores place it at the 47th percentile among all CPUs, with an average benchmark score of 2254. The GeForce RTX 4070 Ti, built on the Ada Lovelace architecture with 7680 shading units, sits at the 84th percentile among all GPUs with an average benchmark score of 44795. That gap in percentile ranking, 84 versus 47, is the first clue that the GPU is the dominant component in this pairing.
The resolution scaling confirms this. From 1920x1080 to 2560x1440, the average FPS at High settings drops from 235 to 176, a 25 percent reduction. From 2560x1440 to 3840x2160, the same settings drop from 176 to 109, a 38 percent reduction. The GPU is clearly the limiting factor as pixel count rises. If the CPU were the bottleneck, the frame rate would flatten at higher resolutions because the GPU would still be waiting on the processor. Instead, the FPS continues to fall steeply with resolution, which is the signature of a GPU-bound scenario.
At 1080p, the CPU's role becomes more visible. The difference between Low and Ultra at 1080p is 117 FPS (271 to 154), while at 4K the same preset gap is 95 FPS (163 to 68). The larger preset gap at lower resolution suggests that the CPU can feed the GPU enough frames to expose the graphics card's full range of performance. At 4K, the GPU is working so hard that preset changes have a relatively smaller impact on the average, because the render workload dominates.
The RTX 4070 Ti has a 192-bit memory bus with 12 GB of GDDR6X memory and a bandwidth of 504.2 GB/s. The i5-9400 supports dual-channel DDR4 memory with a bandwidth of 42.7 GB/s. For a horror game like Downfall, which is likely to load textures and geometry heavily, the GPU memory bandwidth is the more relevant number for 4K performance. The 12 GB capacity is sufficient for the measured presets, as the data shows playable frame rates even at Ultra 4K.
The CPU's single-thread performance, measured by its Cinebench R23 single-core score of 935 and Geekbench single-core score of 1389, is adequate for the game's logic and draw call submission. Its multi-thread scores, Cinebench R23 multi-core of 6629 and Geekbench multi-core of 5141, suggest that the six threads are enough to avoid becoming a serious constraint at 1080p, where the GPU is producing hundreds of frames per second. The data does not show any resolution where the CPU becomes the primary limiter, because the FPS continues to scale with resolution changes.
Similar Performance Alternatives
The CPU's nearest rivals in the database are close in average benchmark score. The Intel Core i7-1068NG7 scores 2259, which is 0.2 percent lower than the i5-9400's average of 2254. The Intel Core i7-10710U scores 2248, 0.3 percent higher. The AMD Ryzen 5 PRO 1500 scores 2246, 0.4 percent higher. The Intel Core i3-10305 scores 2264, 0.4 percent lower. These four processors are effectively interchangeable in terms of overall compute performance, so a system built with any of them would deliver nearly identical frame rates in Downfall, assuming the same GPU and memory configuration.
For the GPU, the nearest rivals are more varied. The NVIDIA GeForce RTX 5090 Mobile scores 45152, 0.8 percent lower than the RTX 4070 Ti's 44795. The AMD Radeon Pro 5500 XT scores 45384, 1.3 percent lower. The NVIDIA RTX A6000 scores 44075, 1.6 percent higher. The Intel Arc A730M scores 45592, 1.7 percent lower. These deltas are all within roughly two percent, meaning that swapping the RTX 4070 Ti for any of these GPUs would produce nearly the same FPS in Downfall. The RTX A6000, despite being a workstation card, sits close enough that its performance profile would feel similar in this game.
It is important to note that the CPU and GPU rival lists are based on average benchmark scores across many workloads, not specifically on Downfall. The database's measured FPS for this exact combo shows that the pairing is well balanced, but a user with an i7-1068NG7 or an RTX A6000 could expect similar results with only minor deviations.
FAQ
Q: Can the Intel Core i5-9400 and RTX 4070 Ti run Downfall at 4K Ultra settings?
A: Yes. The measured average FPS at 3840x2160 with Ultra settings is 68 FPS, which is above the playable threshold of 60 FPS. The database lists Ultra as a playable setting at 4K, with an average of 68 FPS.
Q: Which resolution offers the highest average frame rate?
A: 1920x1080 with Low settings produces the highest average at 271 FPS. The Medium preset at 1080p averages 252 FPS, and Ultra averages 154 FPS.
Q: Is the CPU or the GPU more important for Downfall at 1440p?
A: The GPU is more important. The RTX 4070 Ti ranks at the 84th percentile among all GPUs, while the i5-9400 ranks at the 47th percentile among all CPUs. The frame rate drops from 176 FPS at 1440p High to 109 FPS at 4K High, showing that the GPU's rendering workload drives the performance changes.
Q: What is the lowest recorded minimum FPS in the dataset?
A: The lowest minimum FPS is 113, recorded at 3840x2160 with Medium settings. The 1440p Medium preset shows a minimum of 182 FPS, and the 1080p Medium preset shows a minimum of 214 FPS.
Q: How does the RTX 4070 Ti compare to the RTX 5090 Mobile in overall GPU performance?
A: The RTX 5090 Mobile has an average benchmark score of 45152, which is 0.8 percent lower than the RTX 4070 Ti's score of 44795. The two GPUs are within one percent of each other in the database's aggregate benchmarks.
Q: Does the i5-9400 bottleneck the RTX 4070 Ti at 1080p?
A: The data does not show a clear CPU bottleneck. At 1080p Low, the average FPS is 271, and at 1080p Ultra it is 154. The wide range indicates the GPU is still the primary performance driver, because the CPU would limit the frame rate to a narrower band if it were the constraint.
The Verdict
This PC can run Downfall at all three tested resolutions and all four presets, according to the verdict data. At 3840x2160, the playable settings include High, Low, Medium, and Ultra, with the best average FPS at Ultra being 68. At 2560x1440, all four presets are also playable, with Ultra averaging 110 FPS. At 1920x1080, all four presets are playable, with Ultra averaging 154 FPS.
The playable threshold is 60 FPS, and every recorded average exceeds it. The closest call is 4K Ultra at 68 FPS, which still leaves an 8 FPS margin. The 4K Medium preset averages 133 FPS with a minimum of 113 FPS, so even the worst-case frame in that preset stays well above the threshold. The 1440p Medium preset averages 214 FPS with a minimum of 182 FPS, and the 1080p Medium preset averages 252 FPS with a minimum of 214 FPS.
The combination ranks 679th out of 3716 tested combos in the game's database, placing it in the top 18 percent of all recorded configurations. For a horror game, this level of performance means smooth gameplay with headroom for recording or streaming, assuming those activities do not introduce additional CPU load that the i5-9400 cannot handle.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 68 FPS. This is the highest visual quality available in the dataset, and it still clears the threshold by 8 FPS. Players who want maximum fidelity at 4K can choose Ultra without worrying about dropping below playable frame rates.
At 2560x1440, the most demanding preset is also Ultra, averaging 110 FPS. This provides a comfortable margin above the 60 FPS threshold, leaving room for GPU temperature or driver overhead. The 1440p Ultra setting is the best balance of visual quality and performance in this dataset, because it delivers more than double the minimum playable frame rate.
At 1920x1080, the most demanding preset is Ultra, averaging 154 FPS. This is the highest average frame rate among all Ultra presets across the three resolutions, and it is more than 2.5 times the playable threshold. For competitive or high-refresh-rate displays, the 1080p Medium preset at 252 FPS or the Low preset at 271 FPS would be better choices, but for maximum visual quality, Ultra is the pick.
The database does not provide min or max FPS for the Ultra preset at any resolution, so the verdict relies on the average. The Medium preset's min-max data at each resolution suggests that frame pacing is stable enough for the Ultra preset to also remain playable, given that the Medium min at 4K is 113 FPS and the Ultra average is 68 FPS. The gap between Medium min and Ultra average is 45 FPS at 4K, which implies that Ultra's worst-case frames, if measured, would likely stay above 60 FPS, though the exact value is not recorded.