Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

36%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
175 FPS
Ultra 1080p Measured
73 FPS

1440p (2K / QHD)

Low 1440p Measured
125 FPS
Ultra 1440p Measured
52 FPS

4K (Ultra HD)

Low 4K Measured
78 FPS
Ultra 4K Measured
33 FPS
8.5ms Frame Time
13ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 2,254
Graphics Card
Required 27,400
Your GPU 19,036

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 33 52 64 78
1440p QHD 52 84 102 125
1080p Full HD 73 117 143 175

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 117
1920x1080 Low 175
1920x1080 Medium 143
1920x1080 Ultra 73
2560x1440 High 84
2560x1440 Low 125
2560x1440 Medium 102
2560x1440 Ultra 52
3840x2160 High 52
3840x2160 Low 78
3840x2160 Medium 64
3840x2160 Ultra 33

Performance Analysis: Downfall on Your System

The Intel Core i5-9400 paired with the AMD Radeon RX 6600 delivers a solid 1080p and 1440p experience in Downfall, but 4K requires a compromise. At 1920x1080, the combo reaches 73 FPS on Ultra, which is fully playable. At 2560x1440, High settings produce 84 FPS. The 3840x2160 resolution is the only one that fails to clear the 60 FPS threshold at its highest playable setting, capping out at 64 FPS on Medium.

Best Settings per Resolution

For 3840x2160, the most demanding preset that maintains 60 FPS or higher is Medium. The recorded data shows an average of 64 FPS at this setting, with a minimum of 54 FPS and a maximum of 73 FPS. Low settings push the average to 78 FPS, but the minimum frame time is not recorded for that preset. High settings drop to 52 FPS average, which fails the playability threshold. Ultra is not viable at this resolution, averaging only 33 FPS.

At 2560x1440, the best playable preset is High, which delivers an average of 84 FPS. This is the most demanding setting that stays above 60 FPS. Medium averages 102 FPS, while Low reaches 125 FPS. Ultra falls below the threshold at 52 FPS average. The minimum and maximum values are only logged for Medium at this resolution, showing 87 FPS minimum and 117 FPS maximum.

For 1920x1080, the Ultra preset is the clear choice, averaging 73 FPS. This is the highest quality setting available and it clears the 60 FPS line comfortably. High averages 117 FPS, Medium averages 143 FPS, and Low averages 175 FPS. The Medium preset records a minimum of 122 FPS and a maximum of 164 FPS, indicating strong frame pacing even during demanding scenes.

CPU and GPU Roles

The scaling patterns across resolutions and presets reveal that the GPU is the primary constraint at higher resolutions, while the CPU becomes more relevant at lower resolutions with high preset levels. The data shows a clear relationship: as resolution increases, the average FPS drops at every preset, which points to the Radeon RX 6600 being the limiting factor at 4K.

At 1920x1080, the gap between Low and Ultra is 102 FPS (175 FPS down to 73 FPS). This wide spread indicates that the CPU can feed the GPU effectively at lower resolutions, allowing the graphics card to be the differentiator across presets. The Intel Core i5-9400, with its 6 cores and 6 threads, appears sufficient to keep the RX 6600 busy at 1080p, as the Ultra preset still manages 73 FPS, which is above the threshold.

Moving to 2560x1440, the spread between Low and Ultra narrows to 73 FPS (125 FPS down to 52 FPS). The High preset still delivers 84 FPS, showing that the GPU handles the increased pixel count well until the Ultra preset becomes too demanding. The CPU workload does not scale dramatically with resolution, so the GPU's rendering load is the main factor in the FPS drop.

At 3840x2160, the spread between Low and Ultra is 45 FPS (78 FPS down to 33 FPS). Here, the GPU is clearly the bottleneck. The Ultra preset at 4K averages 33 FPS, which is less than half of the 73 FPS seen at 1080p Ultra. This disproportionate drop indicates that the RX 6600's 8 GB of GDDR6 memory and 128-bit bus width are saturated at 4K, while the CPU has headroom to spare. The CPU's role diminishes as the GPU struggles to maintain frame rates at higher resolutions.

The benchmark results suggest that for 1080p and 1440p gaming, the pair is balanced, with the GPU being the primary performance driver. For 4K, the CPU is not the limiting factor; the GPU is the clear constraint, as evidenced by the steep FPS decline at higher presets.

Similar Performance Alternatives

Looking at the CPU's nearest rivals in the database, the Intel Core i5-9400 sits very close to several other processors. The Intel Core i7-1068NG7 has an average score of 2259, which is only 0.2% higher than the i5-9400's 2254. This means a system with that chip would behave nearly identically in Downfall, assuming the same GPU. The Intel Core i7-10710U scores 2248, a 0.3% difference, again indicating similar performance. The AMD Ryzen 5 PRO 1500 scores 2246, just 0.4% lower, and the Intel Core i3-10305 scores 2264, 0.4% higher. All four rivals are within a fraction of a percent of the i5-9400, so any of them would produce comparable frame rates in this game.

For the GPU, the AMD Radeon RX 6600 has an average benchmark score of 19036. Its nearest rivals include the NVIDIA Quadro K6000 with a score of 19030, a 0% difference. The NVIDIA GeForce RTX 4050 Mobile scores 19049, just 0.1% higher. The NVIDIA Tesla K20m scores 19089, 0.3% higher, and the NVIDIA RTX 2000 Ada Generation scores 18954, 0.4% lower. These deltas are all negligible, meaning a system with any of these GPUs paired with the i5-9400 would deliver nearly identical performance in Downfall.

Users with a Quadro K6000 or RTX 4050 Mobile would see the same playability at each resolution and preset. The 0.4% difference between the RX 6600 and the RTX 2000 Ada Generation is far too small to change the verdict for any resolution. In practical terms, all of these alternatives would produce the same FPS ranges as the RX 6600.

The Verdict

Yes, this PC can run Downfall, but the experience depends heavily on the chosen resolution and preset. The verdictByResolution data confirms that 1920x1080 is fully playable at every preset, including Ultra with 73 FPS average. This is the recommended configuration for the best visual quality without sacrificing smoothness.

At 2560x1440, High settings deliver 84 FPS average, and Medium and Low also clear the 60 FPS threshold. Ultra is not playable, averaging 52 FPS. The best choice for 1440p is High, which balances visual fidelity with performance.

For 3840x2160, the system can only maintain 60 FPS on Low and Medium presets. Medium averages 64 FPS, which is just above the threshold, but the minimum of 54 FPS means there will be occasional dips below 60 FPS. High and Ultra fail to meet the playability standard, with averages of 52 FPS and 33 FPS respectively.

The data indicates that the combo is best suited for 1080p gaming, where it can handle the highest settings. It is also capable at 1440p with a slight settings reduction. For 4K, users must accept Medium settings or lower resolution scaling to stay above 60 FPS.

Measured FPS Breakdown

At 3840x2160, the recorded FPS values are as follows: Low averages 78 FPS with no minimum or maximum recorded. Medium averages 64 FPS, with a minimum of 54 FPS and a maximum of 73 FPS. High averages 52 FPS, and Ultra averages 33 FPS. The lack of min/max data for Low, High, and Ultra means the average is the only reliable metric for those presets.

At 2560x1440, Low averages 125 FPS, Medium averages 102 FPS with a minimum of 87 FPS and a maximum of 117 FPS, High averages 84 FPS, and Ultra averages 52 FPS. The min/max data for Medium shows a 30 FPS spread, which is normal for a horror game with fluctuating scene complexity.

At 1920x1080, Low averages 175 FPS, Medium averages 143 FPS with a minimum of 122 FPS and a maximum of 164 FPS, High averages 117 FPS, and Ultra averages 73 FPS. The Medium preset's minimum of 122 FPS ensures that even the heaviest scenes stay well above the 60 FPS threshold.

The progression from Low to Ultra at each resolution shows a consistent decline in FPS. At 1080p, the drop from Low to Ultra is 102 FPS. At 1440p, the drop is 73 FPS. At 4K, the drop is 45 FPS. This pattern reinforces that the GPU is the limiting factor at higher resolutions, as the relative cost of Ultra settings increases with pixel count.

How This Combo Ranks

The Intel Core i5-9400 and AMD Radeon RX 6600 rank 2889 out of 3716 tested combos in the database for Downfall. This places the pairing in the lower middle tier of all systems tested. The percentile data shows the CPU ranks in the 47th percentile against all CPUs, while the GPU ranks in the 63rd percentile against all GPUs. The GPU is the stronger component in this pairing, which aligns with the observed performance scaling.

A rank of 2889 out of 3716 means the combo outperforms roughly 22% of tested systems, while being beaten by about 78%. This is not a high-end configuration, but the measured FPS data shows it handles Downfall well at 1080p and 1440p. The rank reflects the absolute performance level, not the game-specific suitability. Many higher-ranked combos include newer or more expensive components, but for this particular horror title, the i5-9400 and RX 6600 deliver a smooth experience at standard resolutions.

The CPU's 47th percentile ranking indicates it is an average processor by current standards, while the GPU's 63rd percentile ranking shows it is above average. The combination benefits from the GPU's stronger relative position. The nearest rival data for both components shows that small performance differences exist among similarly ranked hardware, but none of these would change the playability verdicts for Downfall.