Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 73 | 111 | 139 | 169 |
| 1440p QHD | 116 | 181 | 224 | 274 |
| 1080p Full HD | 160 | 256 | 314 | 381 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The Intel Core i5-14400F paired with the NVIDIA GeForce RTX 5070 Ti delivers a commanding performance profile in Downfall, a 2016 horror title that proves remarkably forgiving on modern hardware. The measured data shows this combination not only clears the 60 FPS playability threshold at every resolution and preset tested, but does so with substantial headroom, suggesting the game's age and optimization allow this mid-range CPU and high-end GPU pairing to operate well within its comfort zone across the board.
Best Settings per Resolution
At 1920x1080, the most demanding preset that remains at or above 60 FPS is Ultra, which posts an average of 160.0 FPS. This leaves enormous performance in reserve; even the most visually intensive settings cannot stress this combo at standard HD resolutions.
Moving to 2560x1440, the ceiling remains unchanged. The Ultra preset sustains an average of 115.5 FPS, still nearly double the 60 FPS threshold. The frame rate drop from 1080p to 1440p is notable—a 44.5 FPS reduction—but the absolute performance remains so high that the playability verdict is unaffected.
At 3840x2160, Ultra is again the best playable setting, delivering an average of 72.8 FPS. This is the first resolution where the combo begins to feel the load, with the gap between Ultra and High narrowing to just 38.5 FPS compared to wider margins at lower resolutions. Still, the data confirms that 4K Ultra is comfortably playable, with the average frame rate sitting 12.8 FPS above the 60 FPS baseline.
How This Combo Ranks
The combination ranks 368th out of 3716 tested combos in Downfall, placing it in the top 9.9% of all systems benchmarked for this title. This percentile ranking is striking given that the CPU and GPU individually sit at the 83rd and 86th percentiles among their respective component classes. The game appears to favor this pairing, as the combined rank exceeds what either component's individual percentile would suggest.
The rank also highlights how Downfall's modest graphical demands allow a mid-tier 14th-gen Intel processor to pair effectively with a high-end Blackwell GPU. The i5-14400F's 10 cores and 16 threads, combined with the RTX 5070 Ti's 8960 shading units, create a balanced system where neither component bottlenecks the other, even at 4K resolution.
FAQ
*Q: Can this PC run Downfall at 4K with maximum settings?*
A: Yes. At 3840x2160 with Ultra settings, the combo achieves an average of 72.8 FPS, which is above the 60 FPS playable threshold.
Q: What is the highest playable preset at 1440p?
A: Ultra settings at 2560x1440 produce an average of 115.5 FPS, making it the most demanding preset that still comfortably clears 60 FPS.
Q: How much performance is lost when moving from 1080p to 4K at Ultra settings?
A: The average frame rate drops from 160.0 FPS at 1920x1080 to 72.8 FPS at 3840x2160, a reduction of 87.2 FPS or approximately 54.5%.
Q: Does the RTX 5070 Ti's 16 GB of GDDR7 memory matter for this game?
A: The data does not indicate memory capacity as a limiting factor at any resolution tested. The game runs well above 60 FPS even at 4K Ultra, suggesting the 16 GB frame buffer is more than sufficient for Downfall's demands.
Q: Is the i5-14400F holding back the RTX 5070 Ti in this game?
A: Benchmark results suggest not. The combo ranks in the top 10% of all tested systems, and the frame rates at 1080p (381.3 FPS on Low) indicate the CPU is feeding the GPU effectively without becoming a bottleneck.
Q: What is the difference in performance between Low and Ultra settings at 4K?
A: The average frame rate at 3840x2160 drops from 168.6 FPS on Low to 72.8 FPS on Ultra, a difference of 95.8 FPS. This shows the game's settings have a substantial impact on GPU load.
Similar Performance Alternatives
For the CPU, the i5-14400F's nearest rivals in overall benchmark scores provide insight into systems that would perform similarly in Downfall. The AMD Ryzen 7 PRO 8840U scores within 0.1% of the Intel chip, making it a nearly identical alternative. The Intel Core i9-11900 is also 0.2% away, offering comparable performance from an older generation. The AMD Ryzen 7 6800HS sits 0.2% below the i5, while the Intel Core i7-12800H trails by 0.5%. All four rivals would deliver essentially the same frame rates in this game, as the CPU is clearly not the limiting factor at any resolution tested.
On the GPU side, the RTX 5070 Ti's nearest rivals tell a more interesting story. The AMD Radeon RX Vega 64 has an average score within 0.1% of the NVIDIA card, which is surprising given the architectural generation gap. The Intel Arc A550M is 0.4% faster on average, while the AMD Radeon RX 6900 XT is 2% ahead and the AMD Radeon RX 6800 XT is 3.1% behind. In practice, any of these GPUs would likely produce frame rates within a few percent of the RTX 5070 Ti in Downfall, though the specific game optimization could shift these margins.
CPU and GPU Roles
The data reveals how the balance of responsibility shifts across resolutions. At 1920x1080, the GPU is clearly the dominant factor. The frame rate drops from 381.3 FPS on Low to 160.0 FPS on Ultra, a 221.3 FPS swing that demonstrates how heavily the graphics settings impact the workload. The CPU's role is relatively minor here, as even the lowest settings produce frame rates far beyond what the display can likely show.
At 2560x1440, the same pattern holds but with compressed margins. Low settings yield 274.2 FPS while Ultra drops to 115.5 FPS, a 158.7 FPS difference. The scaling from 1080p to 1440p at Ultra settings shows a 44.5 FPS loss, indicating the GPU is beginning to feel the increased pixel count. The CPU's contribution remains consistent, as the frame rates are still far above any CPU-bound threshold.
The 3840x2160 results show the most interesting dynamics. Low settings still produce 168.6 FPS, but Ultra drops to 72.8 FPS. The gap between Low and Ultra shrinks to 95.8 FPS, suggesting that at 4K, the GPU is becoming the primary constraint across all settings. The scaling from 1440p to 4K at Ultra shows a 42.7 FPS drop, which is proportionally larger than the 1080p-to-1440p drop, confirming that the RTX 5070 Ti's rendering throughput is the key factor at this resolution. The CPU, with its 10 cores and 16 threads, appears to have ample headroom throughout, as even the most demanding GPU scenarios do not produce CPU-limited frame rates.
The Verdict
This PC can absolutely run Downfall at maximum quality across all tested resolutions. The verdict by resolution confirms that Ultra settings are playable everywhere: 160.0 FPS at 1920x1080, 115.5 FPS at 2560x1440, and 72.8 FPS at 3840x2160. All three exceed the 60 FPS playable threshold by double-digit margins, with the 1080p result nearly tripling the requirement.
The most demanding scenario—4K Ultra—still maintains a 12.8 FPS buffer above the threshold, meaning there is no resolution or preset combination in the measured data that fails to deliver smooth gameplay. For a horror title where frame pacing and consistency matter for atmosphere, the average frame rates suggest this combo provides a stable, high-refresh experience even at the highest visual fidelity.
Measured FPS Breakdown
At 1920x1080, the settings ladder shows clear scaling: Low averages 381.3 FPS, Medium drops to 314 FPS, High yields 255.9 FPS, and Ultra bottoms out at 160 FPS. The step between High and Ultra is the largest single reduction at 95.9 FPS, indicating that Ultra settings introduce a significant graphical feature or post-processing load.
At 2560x1440, the same hierarchy applies: Low produces 274.2 FPS, Medium reaches 224.2 FPS, High manages 180.7 FPS, and Ultra delivers 115.5 FPS. The transition from Medium to High costs 43.5 FPS, while High to Ultra costs 65.2 FPS, showing that the higher presets disproportionately increase GPU work at this resolution.
At 3840x2160, the frame rates compress further: Low averages 168.6 FPS, Medium hits 139.4 FPS, High reaches 111.3 FPS, and Ultra settles at 72.8 FPS. The difference between High and Ultra narrows to 38.5 FPS, while the gap between Low and Medium is 29.2 FPS. This compression indicates that at 4K, the GPU is becoming saturated across all settings, though it still never falls below the playability threshold. Notably, the 4K Low result is nearly identical to the 1080p Ultra result (168.6 vs 160.0 FPS), highlighting how resolution scaling and preset scaling interact to produce similar workloads.