Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

60%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
153 FPS
Ultra 1080p Measured
64 FPS

1440p (2K / QHD)

Low 1440p Measured
113 FPS
Ultra 1440p Measured
47 FPS

4K (Ultra HD)

Low 4K Measured
72 FPS
Ultra 4K Measured
32 FPS
9.5ms Frame Time
14ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 32,279
Graphics Card
Required 27,400
Your GPU 9,780

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 32 46 58 72
1440p QHD 47 77 94 113
1080p Full HD 64 105 129 153

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 105
1920x1080 Low 153
1920x1080 Medium 129
1920x1080 Ultra 64
2560x1440 High 77
2560x1440 Low 113
2560x1440 Medium 94
2560x1440 Ultra 47
3840x2160 High 46
3840x2160 Low 72
3840x2160 Medium 58
3840x2160 Ultra 32

Performance Analysis: Downfall on Your System

The Intel Core i5-14400F paired with NVIDIA's GeForce GTX 1070 is a study in generational mismatch: a current 14th Gen Intel processor feeding a Pascal-era graphics card that has long since reached end-of-life. For Downfall, a 2016 horror title, the recorded data shows this pairing is more than adequate at mainstream resolutions, with the GPU acting as the clear performance limiter whenever pixel counts climb. The database ranks this combination 3063 out of 3716 tested pairings in this game, which places it in the lower half overall, yet the verdict tables tell a far more usable story at 1080p and 1440p.

Similar Performance Alternatives

On the CPU side, the Core i5-14400F sits in the 83rd percentile of all processors in the database, with an average benchmark score of 32279. Its nearest rivals are remarkably close: the AMD Ryzen 7 PRO 8840U scores 32233, just 0.1 percent behind; the Intel Core i9-11900 averages 32226, 0.2 percent behind; the AMD Ryzen 7 6800HS posts 32354, 0.2 percent ahead; and the Intel Core i7-12800H lands at 32121, 0.5 percent behind. In practical terms, any of these processors would deliver essentially identical frame delivery in Downfall, since the spread across all four is half a percent. The i5-14400F brings 10 cores and 16 threads on the Raptor Lake-R architecture, a 2.50 GHz base and 4.70 GHz boost clock, and 20 MB of shared L3 cache, with support for both DDR4 and DDR5 memory across a dual-channel bus.

The GTX 1070 occupies the 47th percentile among all GPUs, with an average benchmark score of 9780. Its nearest performance neighbors are an eclectic mix: the AMD FirePro W5000 at 9803 (0.2 percent ahead), the NVIDIA Quadro M2000M at 9832 (0.5 percent ahead), the NVIDIA Tesla M10 at 9724 (0.6 percent behind), and the NVIDIA Tesla C2070 at 9716 (0.7 percent behind). Anyone running one of those cards alongside a comparable modern CPU should expect frame rates within roughly one percent of what this pairing achieves in Downfall. The GTX 1070 itself is built on the GP104 chip at TSMC's 16 nm node, with 1920 shading units, 120 TMUs, 64 ROPs, 8 GB of GDDR5 on a 256-bit bus delivering 256.3 GB/s of bandwidth, and a peak FP32 throughput of 6.463 TFLOPS.

CPU and GPU Roles

The scaling data makes the division of labor obvious. Moving from 1080p to 1440p at Medium settings drops the average from 129.2 to 93.6 FPS, and stepping up to 4K at the same preset cuts it further to 58.1 FPS. That resolution-driven falloff, with frame rates nearly halving as pixel count quadruples, is the signature of GPU limitation. The Core i5-14400F, sitting in the 83rd percentile of all CPUs, never becomes the constraint here; the GTX 1070 at the 47th GPU percentile is the component setting the ceiling.

Consider the Low preset as further evidence: 153.3 FPS at 1080p, 112.9 FPS at 1440p, and 71.9 FPS at 4K. The frame rate scales almost linearly with resolution at each preset, which is characteristic of a render-bound system rather than a CPU-bound one. Downfall is a 2016 horror game released the same month the GTX 1070 launched, and a decade-plus-old GPU handling a contemporary title explains why even this modest card clears the 60 FPS playable threshold in most configurations. At every resolution tested, raising settings costs frames in a consistent pattern, and the i5-14400F's strong single-thread results (a Geekbench single-core score of 2058 and Cinebench R23 single-core score of 3055) guarantee the processor feeds frames faster than the Pascal card can draw them.

Measured FPS Breakdown

All figures below are measured averages from the database; minimum and maximum frame rates were not recorded for this test configuration.

At 1920x1080, the pairing is comfortable across the board. Low settings deliver 153.3 FPS, Medium raises visual fidelity at 129.2 FPS, High lands at 104.7 FPS, and even Ultra holds a 64 FPS average, four frames above the 60 FPS playable threshold. Full 1080p Ultra play is achievable without compromise.

At 2560x1440, Low reaches 112.9 FPS and Medium holds 93.6 FPS, both well clear of the threshold. High manages 76.8 FPS, still comfortably playable. Ultra falls to 46.9 FPS, roughly 22 percent below the 60 FPS mark, making it the one preset to avoid at this resolution.

At 3840x2160, the picture tightens considerably. Low is the only preset that stays above 60 FPS, at 71.9 FPS. Medium drops to 58.1 FPS, agonizingly close to the threshold but technically under it. High falls to 45.7 FPS and Ultra to 31.9 FPS, the latter representing less than half the playable frame rate. The gap between the best and worst 4K presets spans nearly 40 frames, underscoring how heavily the GTX 1070's 8 GB framebuffer and Pascal architecture lean on reduced settings when pushing four times the pixels of 1080p.

Across all twelve measurement points, the pattern is consistent: each step up in preset costs between 15 and 20 percent of the average frame rate at a given resolution, while each step up in resolution at a fixed preset costs roughly 25 to 35 percent.

How This Combo Ranks

This pairing ranks 3063 out of 3716 tested combinations in Downfall, placing it below roughly the 18th percentile of tested setups for this specific game. That ranking reflects the GTX 1070's mid-pack standing among all GPUs in the database rather than any weakness in the processor, which holds an 83rd percentile CPU ranking. The combination's average benchmark scores, 32279 for the CPU and 9780 for the GPU, illustrate the imbalance: a modern mid-range processor yoked to an end-of-life graphics card.

For context on what the components deliver in isolation, the i5-14400F posts a Cinebench R23 multi-core score of 21645 and a PassMark multithread score of 25470, numbers that would rank among the stronger half of any gaming-oriented pairing. The GTX 1070's PassMark G3D score of 13498 and 3DMark Steel Nomad DX12 score of 1082 describe a card that was competitive in its day but now trails modern mid-range offerings. Despite the modest combination ranking, the verdict data confirms genuine playability at two of the three tested resolutions, which is the metric that matters most for a horror game where consistent frame pacing matters more than raw peak numbers.

FAQ

Q: Can the i5-14400F and GTX 1070 run Downfall at 1080p on max settings?

A: Yes. Ultra at 1920x1080 averages 64 FPS, above the 60 FPS playable threshold. It is the only resolution where Ultra qualifies as playable.

Q: What is the best setting for 4K play?

A: Low, averaging 71.9 FPS. Medium at 4K averages 58.1 FPS, which falls just short of the threshold, so Low is the only playable preset at 3840x2160.

Q: Is this combination CPU-limited or GPU-limited in Downfall?

A: GPU-limited. Frame rates drop sharply as resolution rises (129.2 to 93.6 to 58.1 FPS at Medium across the three resolutions), while the 83rd-percentile CPU has ample headroom.

Q: How does this pairing rank against other tested combinations in Downfall?

A: It ranks 3063 of 3716 combinations, in the lower portion of the field, driven by the GTX 1070's 47th-percentile GPU standing.

Q: How much performance is lost going from 1080p Ultra to 1440p Ultra?

A: The average falls from 64 FPS to 46.9 FPS, a drop that pushes 1440p Ultra below the playable threshold.

Q: What CPUs would perform similarly to the i5-14400F here?

A: The AMD Ryzen 7 PRO 8840U, Intel Core i9-11900, AMD Ryzen 7 6800HS, and Intel Core i7-12800H all sit within 0.5 percent of its average benchmark score.

Best Settings per Resolution

Based on the recorded verdicts, the most demanding preset that keeps the average at or above 60 FPS at each resolution is:

  • 1920x1080: Ultra, averaging 64 FPS. The full visual package is on the table, with a small margin above the threshold.
  • 2560x1440: High, averaging 76.8 FPS. Dropping one notch from Ultra recovers nearly 30 frames and restores a comfortable buffer.
  • 3840x2160: Low, averaging 71.9 FPS. The only preset above the threshold at 4K; Medium at 58.1 FPS misses the cutoff by under two frames.

In short, this pairing handles Downfall well at 1080p and 1440p with settings largely intact, while 4K demands significant compromises from the aging Pascal card. The i5-14400F, launched at a $196 MSRP and still an active product on Intel Socket 1700, provides far more processor than this game or this GPU requires, meaning any future graphics upgrade would immediately shift the performance ceiling without touching the CPU.