Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

65%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
210 FPS
Ultra 1080p Measured
88 FPS

1440p (2K / QHD)

Low 1440p Measured
150 FPS
Ultra 1440p Measured
63 FPS

4K (Ultra HD)

Low 4K Measured
93 FPS
Ultra 4K Measured
39 FPS
7.1ms Frame Time
11ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 27,799
Graphics Card
Required 27,400
Your GPU 16,014

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 63 76 93
1440p QHD 63 101 123 150
1080p Full HD 88 141 172 210

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 141
1920x1080 Low 210
1920x1080 Medium 172
1920x1080 Ultra 88
2560x1440 High 101
2560x1440 Low 150
2560x1440 Medium 123
2560x1440 Ultra 63
3840x2160 High 63
3840x2160 Low 93
3840x2160 Medium 76
3840x2160 Ultra 39

Performance Analysis: Downfall on Your System

The Intel Core i5-12600KF paired with the AMD Radeon RX 9060 delivers a fully playable experience in Downfall at every tested resolution, though the margin of comfort narrows considerably at 4K. Benchmark results show the combination produces an average of 63 FPS at 4K High, 101 FPS at 1440p High, and 141 FPS at 1080p High, indicating that the system scales well as resolution drops. The data also reveals that the CPU holds its own in this horror title, with the GPU becoming the primary constraint only at the highest preset and resolution. This analysis draws exclusively from measured FPS data, component benchmarks, and comparative rankings.

Similar Performance Alternatives

The CPU and GPU each have a set of near-neighbor components that would behave almost identically in Downfall, based on aggregate benchmark scores. For the Intel Core i5-12600KF, the nearest rival is the AMD Ryzen 7 5800X3D, which scores 27896 in the average benchmark versus the i5-12600KF’s 27799, a delta of -0.3%. This means the Ryzen 7 5800X3D is essentially a performance twin for CPU-bound scenes. The Intel Core i9-10900K also lands within the same bracket, with an average score of 27872 and a -0.3% delta, so users coming from that older flagship would see nearly identical frame pacing. On the other side, the AMD Ryzen 5 8500GE scores 27712 (delta +0.3%) and the AMD Ryzen 7 6800U scores 27887 (delta -0.3%), both of which are within a fraction of a percent. In practice, any of these four processors would produce the same CPU-limited FPS values in Downfall at 1080p and 1440p, where the i5-12600KF is not the bottleneck.

For the AMD Radeon RX 9060, the closest competitor is the NVIDIA GeForce RTX 3060 Ti, which posts an average benchmark score of 16129 versus the RX 9060’s 16014, a delta of -0.7%. That places the RTX 3060 Ti as a direct substitute for GPU-bound scenarios, particularly at 4K Ultra where the RX 9060 drops to 39 FPS. The AMD Radeon RX 7700 is also nearby with a score of 15852 (delta +1%), meaning it would deliver within one percent of the same frame rates. The AMD Radeon R9 370X, despite being an older architecture, scores 15862 (delta +1%) and would offer comparable performance in this specific title, though it lacks modern feature support. The AMD Radeon Pro W5500 completes the group with 15679 (delta +2.1%), still a close match for the RX 9060’s rasterization throughput. When selecting a replacement or a system with similar behavior, these five GPUs would all land within roughly two percent of the RX 9060’s measured FPS across resolutions.

CPU and GPU Roles

The division of labor between the Intel Core i5-12600KF and the AMD Radeon RX 9060 shifts markedly as resolution changes. At 1080p, the CPU’s 10 cores and 16 threads are more than sufficient, and the GPU becomes the limiting factor for high and ultra settings. The frame rate drops from 210 FPS at Low to 141 FPS at High, a reduction of 33%, while the Ultra preset further declines to 88 FPS. This pattern shows that the GPU’s shading units and memory bandwidth are the primary drivers of performance at this resolution, not the processor. The i5-12600KF’s single-thread score of 1016 in 3DMark and its Cinebench R23 single-core result of 3302 ensure that even the most demanding CPU scenes in the game do not bottleneck the RX 9060.

Moving to 1440p, the relationship remains GPU-leaning but with a smaller CPU contribution. The average FPS at Low is 150, which is 29% lower than the 1080p Low figure, indicating that the GPU’s pixel throughput is starting to saturate. At Medium, the 123 FPS average with a minimum of 104 FPS shows the GPU still has headroom, but the gap between Low and Medium (150 to 123, a 18% drop) is narrower than at 1080p (210 to 172, a 18% drop as well). The Ultra preset at 1440p produces 63 FPS, which is exactly the same as the 4K High result, suggesting that the GPU is now the sole constraint and the CPU’s role has diminished to providing a stable frame delivery floor.

At 3840x2160, the CPU’s influence is minimal. The RX 9060’s 128-bit memory bus and 288.0 GB/s bandwidth become the defining factors. The measured FPS at 4K Low is 93, which is 38% lower than 1440p Low’s 150, and the Medium preset yields 76 FPS with a minimum of 65 FPS. The High preset at 4K produces 63 FPS, while Ultra collapses to 39 FPS. These numbers demonstrate that the GPU is fully utilized at 4K, and the i5-12600KF’s 20 MB of shared L3 cache and 16 threads are irrelevant to the final frame rate. In summary, the CPU matters most at 1080p and 1440p Medium or lower, while the GPU dominates at 4K and at Ultra settings across all resolutions.

How This Combo Ranks

In the global database of tested combinations for Downfall, the i5-12600KF plus RX 9060 ranks 2185 out of 3716 combos. That places it in the 59th percentile of all tested systems, meaning roughly 41% of configurations deliver better performance and 59% deliver worse. This is a mid-tier ranking, consistent with the CPU’s 79th percentile among all CPUs and the GPU’s 59th percentile among all GPUs. The combo’s rank is pulled down by the GPU, which is the weaker component in the pair. The i5-12600KF’s average benchmark score of 27799 puts it in the upper tier of processors, but the RX 9060’s 16014 average score is squarely in the middle of the GPU distribution.

The rank of 2185 out of 3716 suggests that for Downfall specifically, the combination is adequate for 60 FPS gaming at most settings, but it is not a high-end performer. The measured FPS data supports this: the combo achieves 63 FPS at 4K High, which is the playable threshold exactly, and 63 FPS at 1440p Ultra. The only setting where it falls below 60 FPS is 4K Ultra at 39 FPS. Compared to the nearest rival GPU, the RTX 3060 Ti, the RX 9060 would likely rank a few positions higher or lower depending on driver optimizations, but the delta of -0.7% means the difference is negligible. The CPU’s nearest rival, the Ryzen 7 5800X3D, would not change the combo rank because the GPU is the bottleneck in all but the lowest resolution presets.

FAQ

Q: Is the Intel Core i5-12600KF + AMD Radeon RX 9060 combination playable at 4K?

A: Yes, but only at High settings or lower. The measured average FPS at 3840x2160 is 63 FPS on High, 76 FPS on Medium, and 93 FPS on Low. The Ultra preset falls to 39 FPS, which is below the 60 FPS playable threshold.

Q: What is the best settings preset for 1440p with this combo?

A: The Ultra preset is fully playable at 2560x1440, producing an average of 63 FPS. This is the most demanding setting that stays at or above 60 FPS, and it matches the 4K High result in frame rate.

Q: How does the RX 9060 compare to the RTX 3060 Ti in this game?

A: The RX 9060 has an average benchmark score of 16014, while the RTX 3060 Ti scores 16129, a delta of -0.7%. In Downfall, this translates to a frame rate difference of less than one percent, so the two GPUs are effectively interchangeable.

Q: Does the CPU ever bottleneck the GPU in Downfall?

A: The data indicates no CPU bottleneck at any resolution. At 1080p Low, the combo reaches 210 FPS, and at 1440p Low it hits 150 FPS, both of which are far above the playable threshold. The i5-12600KF’s 10 cores and 16 threads, combined with a 4.90 GHz boost clock, are sufficient to feed the RX 9060 at all settings.

Q: What is the lowest playable setting at 4K?

A: The Low preset at 3840x2160 yields 93 FPS on average, which is the highest frame rate among 4K presets. The Medium preset also remains playable at 76 FPS, and High at 63 FPS is exactly at the playable threshold.

Q: What is the combo’s rank among all tested systems?

A: The i5-12600KF and RX 9060 rank 2185 out of 3716 total combinations tested for Downfall. This places it in the 59th percentile of all systems.

Measured FPS Breakdown

The measured FPS data for this combination covers three resolutions and four presets, with some entries including minimum and maximum values. At 1920x1080, the Low preset delivers an average of 210 FPS, with no min or max recorded. The Medium preset averages 172 FPS, with a minimum of 146 FPS and a maximum of 198 FPS. High settings produce 141 FPS on average, and Ultra drops to 88 FPS. None of the 1080p presets fall below the 60 FPS playable threshold, and even the Ultra minimum would be well above it, though the minimum is not listed for that preset.

At 2560x1440, the Low preset averages 150 FPS. Medium averages 123 FPS, with a minimum of 104 FPS and a maximum of 141 FPS. High settings yield 101 FPS, and Ultra averages 63 FPS. The Ultra minimum is not provided, but the average being exactly 60 FPS suggests that occasional dips below 60 are possible, though the data does not confirm this. The Medium preset’s minimum of 104 FPS is a strong indicator of smooth gameplay, and the High preset’s 101 FPS average leaves ample headroom.

At 3840x2160, the Low preset averages 93 FPS. Medium averages 76 FPS, with a minimum of 65 FPS and a maximum of 88 FPS. High settings produce 63 FPS on average, and Ultra drops to 39 FPS. The Medium preset’s minimum of 65 FPS is just above the playable threshold, meaning that even in demanding scenes, the game remains fluid. The High preset’s 63 FPS average is exactly at the playable threshold, but no minimum is recorded, so there is a risk of dips below 60 FPS in heavy scenes. The Ultra preset is unplayable by the 60 FPS standard, with an average of 39 FPS.

Best Settings per Resolution

For 1920x1080, the most demanding preset that maintains at least 60 FPS is Ultra, which achieves an average of 88 FPS. This is a comfortable margin above the threshold, and the High preset at 141 FPS and Medium at 172 FPS are also excellent options, but Ultra is the recommended choice for maximum visual quality without sacrificing smoothness.

At 2560x1440, the Ultra preset is again the best option, with an average of 63 FPS. This is exactly at the playable threshold, so while it meets the requirement, users who prefer a safety buffer might consider High at 101 FPS instead. The data shows that Ultra at 1440p is technically playable, but the lack of a recorded minimum FPS means that transient dips could occur.

At 3840x2160, the highest playable preset is High, which averages 63 FPS. This is the only 4K preset that meets the 60 FPS criterion, aside from Low at 93 FPS and Medium at 76 FPS. The Ultra preset at 39 FPS is not playable. For the best visual experience at 4K, High is the recommended setting, with Medium as a fallback if frame pacing becomes an issue. The measured minimum of 65 FPS on Medium provides more assurance than the High preset’s unrecorded minimum.