Downfall

The Intel Core i5-12400F paired with the NVIDIA GeForce RTX 5050 delivers a playable experience across nearly the entire settings range in Downfall, a 2016 horror title. Benchmark data shows the combination clears the 60 FPS threshold at 4K with High settings, and at 1440p and 1080p it can push into Ultra territory. The measured results are consistent across resolutions, with the most demanding preset at 4K being the only configuration that falls below the playability line.

Measured FPS Breakdown

At 3840x2160, the RTX 5050 produces an average of 60 FPS on High settings, with no minimum or maximum recorded. Dropping to Medium raises the average to 73 FPS, with a minimum of 62 FPS and a maximum of 84 FPS — the only 4K preset with full frame-time data. Low settings yield 89 FPS on average. Ultra is the sole 4K preset that fails the 60 FPS threshold, averaging 37 FPS.

At 2560x1440, the scaling is more forgiving. Low settings average 144 FPS, Medium averages 118 FPS with a 100 FPS minimum and 135 FPS maximum, and High averages 96 FPS. Ultra at 1440p lands at exactly 60 FPS on average, which is the playability cutoff for this analysis.

At 1920x1080, the numbers climb substantially. Low settings average 201 FPS. Medium averages 165 FPS with a 140 FPS minimum and 189 FPS maximum. High averages 135 FPS, and Ultra averages 84 FPS — still well above the 60 FPS threshold. The 1080p results show the widest headroom across all presets, with every configuration comfortably exceeding the minimum playable frame rate.

The pattern across resolutions is consistent: the gap between Low and Ultra narrows as resolution decreases. At 4K, the spread from Low (89 FPS) to Ultra (37 FPS) is 52 FPS. At 1440p, the spread from Low (144 FPS) to Ultra (60 FPS) is 84 FPS. At 1080p, the spread from Low (201 FPS) to Ultra (84 FPS) is 117 FPS. This indicates that the GPU is the primary limiter at 4K Ultra, while the CPU becomes relatively more involved at lower resolutions where the frame rate ceiling is higher.

CPU and GPU Roles

The data suggests that the RTX 5050 is the dominant factor at 4K, where the frame rate drops sharply from Medium (73 FPS) to Ultra (37 FPS) — a 49% reduction in performance for that preset change. The i5-12400F, with its 6 cores and 12 threads, provides enough throughput to keep the GPU fed at lower resolutions, as evidenced by the 201 FPS result at 1080p Low.

The scaling between 1440p and 1080p reveals the CPU's contribution. At Medium settings, the frame rate rises from 118 FPS at 1440p to 165 FPS at 1080p — a 40% increase. At Low settings, the jump is from 144 FPS to 201 FPS, a 40% increase as well. This proportional scaling indicates that neither component is a hard bottleneck at these settings; both scale as expected with pixel count.

However, at Ultra settings, the jump from 1440p (60 FPS) to 1080p (84 FPS) is only 40% — the same proportional increase. This suggests the RTX 5050's raw throughput is the binding constraint at Ultra across all resolutions, while the CPU's 3DMark multi-threaded score of 5895 (16 threads) and single-thread score of 909 are sufficient for the game's demands. The CPU's percentile ranking of 73 versus all CPUs places it above average, and its Cinebench R23 multi-core score of 12380 confirms it can handle the game's thread load without limiting the GPU at lower presets.

Similar Performance Alternatives

For the CPU, the nearest rivals based on average benchmark score are the AMD Ryzen 5 7535HS, Intel Core 3 201E, Intel Core i5-1335U, and AMD EPYC 7773X. The Ryzen 5 7535HS scores 19047, essentially identical to the i5-12400F's 19039 (0% delta). The Core 3 201E scores 19056 (-0.1% delta), the Core i5-1335U scores 18982 (0.3% delta), and the EPYC 7773X scores 18979 (0.3% delta). All four are within a fraction of a percent of the i5-12400F's performance, meaning any of these would produce nearly identical frame rates in Downfall.

For the GPU, the nearest rivals are the AMD Radeon RX Vega M GL, AMD Radeon HD 8970M, AMD Radeon RX 5600 XT, and NVIDIA RTX A4000 Mobile. The RX Vega M GL scores 21153 (-0.6% delta), the HD 8970M scores 21237 (-1% delta), the RX 5600 XT scores 20713 (1.6% delta), and the RTX A4000 Mobile scores 21379 (-1.6% delta). The RTX 5050's average score is 21035; the RX 5600 XT is the only rival that is faster, and only by 1.6%. In practice, swapping the RTX 5050 for an RX 5600 XT would yield marginally higher frame rates, while the other three would be slightly slower — all within the margin of error for this title.

The Verdict

This PC can run Downfall at 60 FPS or above in most configurations. At 3840x2160, the playable presets are High (60 FPS average), Low (89 FPS), and Medium (73 FPS). Ultra at 4K is not playable, averaging 37 FPS. At 2560x1440, all four presets are playable, with Ultra averaging exactly 60 FPS. At 1920x1080, all four presets are playable, with Ultra averaging 84 FPS.

The verdict by resolution is clear: the best settings for each resolution are High at 4K (60 FPS), Ultra at 1440p (60 FPS), and Ultra at 1080p (84 FPS). The 4K Ultra preset is the only configuration that fails the playability threshold. For users aiming for the highest visual quality at 4K, the 37 FPS average would require lowering settings to High to maintain 60 FPS.

FAQ

*Q: Can this system run Downfall at 4K Ultra?*

A: No. The measured average FPS at 3840x2160 Ultra is 37 FPS, which is below the 60 FPS playability threshold.

Q: What is the best preset at 1440p?

A: Ultra settings at 2560x1440 average 60 FPS, making it the most demanding preset that remains playable at that resolution.

Q: Does the CPU bottleneck the GPU in this game?

A: The data does not indicate a CPU bottleneck. The i5-12400F's benchmark scores (e.g., Cinebench R23 multi-core of 12380) are sufficient to support frame rates up to 201 FPS at 1080p Low, and the frame rate scaling between resolutions is proportional.

Q: How does the RTX 5050 compare to the RX 5600 XT in this title?

A: The RX 5600 XT has an average benchmark score of 20713, which is 1.6% lower than the RTX 5050's 21035. This translates to a negligible difference in Downfall frame rates.

Q: Is the 4K Medium preset smooth?

A: Yes. At 3840x2160 Medium, the average FPS is 73, with a minimum of 62 FPS and a maximum of 84 FPS, all above the 60 FPS threshold.

Q: What frame rate can I expect at 1080p Ultra?

A: The measured average at 1920x1080 Ultra is 84 FPS, with no minimum or maximum recorded in the data.

Best Settings per Resolution

At 3840x2160, the best playable settings are High, averaging 60 FPS. This is the only 4K preset that meets the 60 FPS threshold while offering higher quality than Low (89 FPS) or Medium (73 FPS) — though all three are playable. Ultra at 4K averages 37 FPS and is not recommended.

At 2560x1440, the best settings are Ultra, averaging 60 FPS. This is the highest preset available, and it exactly meets the playability threshold. All other presets at this resolution (Low: 144 FPS, Medium: 118 FPS, High: 96 FPS) also clear 60 FPS.

At 1920x1080, the best settings are Ultra, averaging 84 FPS. This preset provides the highest visual quality while maintaining a comfortable margin above the 60 FPS threshold. The 1080p Ultra result represents the best balance of quality and performance for this combo.

How This Combo Ranks

This combination of the Intel Core i5-12400F and NVIDIA GeForce RTX 5050 ranks 2281 out of 3716 tested combos in Downfall. This places it in the upper-middle tier of all tested configurations, roughly in the 61st percentile. The ranking reflects the fact that the system can handle the game at high settings across all resolutions, but falls short of the top-tier hardware that would maintain 60 FPS at 4K Ultra. The CPU's 73rd percentile ranking versus all CPUs and the GPU's 66th percentile ranking versus all GPUs are consistent with this overall position — neither component is a standout, but both are above average, and their combination delivers a solidly playable experience in this title.