Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

42%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
156 FPS
Ultra 1080p Measured
66 FPS

1440p (2K / QHD)

Low 1440p Measured
110 FPS
Ultra 1440p Measured
46 FPS

4K (Ultra HD)

Low 4K Measured
70 FPS
Ultra 4K Measured
29 FPS
9.7ms Frame Time
15ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 19,039
Graphics Card
Required 27,400
Your GPU 9,780

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 29 46 59 70
1440p QHD 46 74 92 110
1080p Full HD 66 103 125 156

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 103
1920x1080 Low 156
1920x1080 Medium 125
1920x1080 Ultra 66
2560x1440 High 74
2560x1440 Low 110
2560x1440 Medium 92
2560x1440 Ultra 46
3840x2160 High 46
3840x2160 Low 70
3840x2160 Medium 59
3840x2160 Ultra 29

Performance Analysis: Downfall on Your System

Measured FPS Breakdown

The recorded data for Downfall on the Intel Core i5-12400F and NVIDIA GeForce GTX 1070 combination shows a wide spread of performance across resolutions and presets. At 1920x1080, the frame rates are largely comfortable. Low settings deliver an average of 156.2 FPS, Medium reaches 125.4 FPS, and High stays at 103.4 FPS. Even the most demanding preset, Ultra, holds an average of 65.5 FPS, which clears the 60 FPS playability threshold.

Moving to 2560x1440, the numbers drop but remain respectable for most settings. Low averages 109.8 FPS, Medium hits 91.9 FPS, and High produces 73.9 FPS. The outlier is Ultra, which falls to an average of 46 FPS, placing it below the playable mark. At 3840x2160, the strain is evident. Low manages 69.9 FPS, Medium drops to 58.5 FPS, High falls to 46.2 FPS, and Ultra plummets to 29.1 FPS. Notably, the database records no minimum or maximum frame times for any of these runs, so the analysis relies entirely on average FPS values.

The scaling between presets is sharp. At 1080p, moving from Low to Ultra cuts the frame rate by more than half, from 156.2 to 65.5 FPS. At 1440p, the drop from Low to Ultra is steeper, from 109.8 to 46 FPS. At 4K, the decline is even more pronounced, with Ultra running at less than half the speed of Low. This indicates that Downfall responds strongly to graphics settings, particularly at higher resolutions where the GPU is under heavy load.

CPU and GPU Roles

The data shows that the NVIDIA GeForce GTX 1070 is the limiting factor in this pairing, especially as resolution climbs. At 1080p, the CPU can feed the GPU enough frames to reach 156.2 FPS on Low, suggesting that the i5-12400F has ample headroom. However, the GPU's Pascal architecture, with 1920 shading units and 6.463 TFLOPS of FP32 performance, starts to bottleneck as the pixel count increases. The leap from 1080p to 1440p reduces the Low preset average from 156.2 to 109.8 FPS, a 29.7% decline. From 1440p to 4K, Low falls further to 69.9 FPS, a 36.3% drop. These reductions are far larger than what the CPU alone would cause, pointing to the GPU as the primary constraint.

At 1080p Ultra, the system still manages 65.5 FPS, which indicates that the GTX 1070 can handle the game's heaviest settings when the resolution is modest. The CPU's 6 cores and 12 threads, with a boost clock of 4.40 GHz, are sufficient to avoid stalling the GPU at this resolution. The benchmark results, including a Cinebench R23 multi-core score of 12380 and a single-core score of 1680, support the idea that the processor is not the weak link.

At 1440p and above, the GPU's memory bandwidth of 256.3 GB/s and 8 GB of GDDR5 memory become more relevant. The 4K High preset, at 46.2 FPS, and 4K Ultra, at 29.1 FPS, show that the GTX 1070 cannot sustain smooth gameplay when the render target is large. The CPU's role diminishes further at 4K, as the GPU is clearly saturated. In short, the i5-12400F provides enough compute power, but the GTX 1070 dictates the playable ceiling.

Best Settings per Resolution

For each resolution, the database identifies the most demanding preset that stays at or above 60 FPS. At 1920x1080, that preset is Ultra, with an average of 65.5 FPS. This is the best visual quality the combo can manage while remaining playable, and it clears the threshold by a comfortable 5.5 FPS. At 2560x1440, the best playable preset is High, averaging 73.9 FPS. Medium also clears the bar at 91.9 FPS, but High offers better visuals without sacrificing smoothness. At 3840x2160, only Low remains playable, with an average of 69.9 FPS. Medium falls short at 58.5 FPS, just under the 60 FPS line, so the recommendation is to stick with Low for 4K play.

In practical terms, a user aiming for high frame rates at 1080p can safely use Ultra. At 1440p, High is the ceiling, and anything above that will dip below the playable mark. At 4K, the system is effectively limited to Low settings, and even then, the margin is thin. The recorded data does not include minimum FPS, so these averages should be treated as indicative rather than worst-case guarantees.

How This Combo Ranks

The combination of the Intel Core i5-12400F and the NVIDIA GeForce GTX 1070 ranks 3113 out of 3716 tested combos in the database for Downfall. That places it in the lower 16% of all configurations, which is consistent with the GPU's age and its 47th percentile ranking among all GPUs. The CPU, by contrast, sits at the 73rd percentile among all processors, with an average benchmark score of 19039. The nearest rivals for the CPU include the AMD Ryzen 5 7535HS with an average score of 19047, a delta of 0%, and the Intel Core 3 201E at 19056, a delta of -0.1%. The GPU's nearest rivals are the AMD FirePro W5000 at 9803, a delta of -0.2%, and the NVIDIA Quadro M2000M at 9832, a delta of -0.5%.

The rank of 3113 indicates that most other tested systems outperform this pairing in Downfall. However, the game is not particularly demanding at 1080p, as evidenced by the playable Ultra preset. The combo's low rank is more a reflection of the GPU's position in the current landscape than a sign that the system struggles with this specific title. The GTX 1070's average benchmark score of 9780 places it near several professional and mobile workstation cards, none of which are known for high-end gaming performance. Still, the measured FPS data shows that this setup delivers a smooth experience at the most common resolution.

FAQ

Q: Can this system run Downfall at 1920x1080 with the highest settings?

A: Yes. The Ultra preset at 1080p averages 65.5 FPS, which exceeds the 60 FPS playable threshold.

Q: What is the best settings preset for 2560x1440?

A: High is the best playable preset at 1440p, with an average of 73.9 FPS. Medium also works at 91.9 FPS, but High offers superior visuals while staying above 60 FPS.

Q: Is 4K gaming possible with this CPU and GPU combination?

A: Only at Low settings. The 4K Low preset averages 69.9 FPS, while Medium drops to 58.5 FPS and High falls to 46.2 FPS, both below the playable mark.

Q: How does the Intel Core i5-12400F compare to its nearest rivals in synthetic benchmarks?

A: The i5-12400F posts an average benchmark score of 19039. Its closest competitor, the AMD Ryzen 5 7535HS, scores 19047, a 0% difference, and the Intel Core 3 201E scores 19056, a -0.1% difference.

Q: What is the playable frame rate threshold used in this analysis?

A: The database uses 60 FPS as the playable threshold. Any preset averaging at least 60 FPS is considered playable.

Q: Does the GTX 1070 have enough memory for Downfall at high resolutions?

A: The GPU has 8 GB of GDDR5 memory with a 256-bit bus and 256.3 GB/s bandwidth. The measured data shows this is sufficient for 1080p Ultra and 1440p High, but not for 4K Medium or above, where frame rates drop below 60 FPS.

The Verdict

The Intel Core i5-12400F and NVIDIA GeForce GTX 1070 pairing can run Downfall, but the experience depends heavily on resolution and settings. At 1920x1080, the system is fully capable, with all presets including Ultra clearing the 60 FPS threshold. Ultra averages 65.5 FPS, which is smooth enough for most players. At 2560x1440, the system remains playable up to High settings, which averages 73.9 FPS. Medium is also viable at 91.9 FPS, but Ultra is not, as it falls to 46 FPS. At 3840x2160, only Low settings are playable, with an average of 69.9 FPS. Medium just misses the mark at 58.5 FPS, and higher presets are far below the threshold.

The verdict by resolution is clear: 1080p Ultra is the best overall experience, 1440p High is the ceiling for quality, and 4K is limited to Low. The combo ranks 3113 out of 3716 tested configurations, which underscores that this is not a high-end setup by current standards. However, for a game like Downfall, the system delivers playable frame rates at the most common resolutions. The GTX 1070 is the bottleneck at higher resolutions, but the i5-12400F provides enough CPU headroom to avoid holding the GPU back. In short, this PC can run Downfall well at 1080p, adequately at 1440p, and only marginally at 4K.