Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

66%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
294 FPS
Ultra 1080p Measured
124 FPS

1440p (2K / QHD)

Low 1440p Measured
208 FPS
Ultra 1440p Measured
87 FPS

4K (Ultra HD)

Low 4K Measured
131 FPS
Ultra 4K Measured
57 FPS
5.1ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 18,683
Graphics Card
Required 27,400
Your GPU 23,877

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 57 88 110 131
1440p QHD 87 140 169 208
1080p Full HD 124 196 243 294

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 196
1920x1080 Low 294
1920x1080 Medium 243
1920x1080 Ultra 124
2560x1440 High 140
2560x1440 Low 208
2560x1440 Medium 169
2560x1440 Ultra 87
3840x2160 High 88
3840x2160 Low 131
3840x2160 Medium 110
3840x2160 Ultra 57

Performance Analysis: Downfall on Your System

The Intel Core i5-12400 paired with the AMD Radeon RX 9070 delivers a commanding performance profile in Downfall, a horror title from 2016 that remains highly playable on this modern mid-range setup. Benchmark data indicates that the combination is not merely adequate but overwhelmingly capable, with frame rates that routinely exceed the 60 FPS playability threshold by a wide margin across nearly every resolution and preset level. The only exception occurs at the extreme 4K Ultra setting, where the average frame rate dips slightly below the target. The data shows a system that scales predictably with resolution and settings, offering a smooth and responsive experience for the vast majority of configurations.

Measured FPS Breakdown

The measured FPS data for this combination provides a clear picture of its capabilities. At 1920x1080, the system is exceptionally fast, with performance that will likely be limited by the display's refresh rate rather than the hardware. The Low preset yields an average of 293.6 FPS, while the Medium preset is not far behind at 242.8 FPS. Even the demanding High preset achieves an average of 195.9 FPS. The Ultra preset, which is the most taxing, still produces an impressive average of 124.4 FPS. This data suggests that at 1080p, the combination of the Core i5-12400 and Radeon RX 9070 has significant headroom, making it an excellent choice for high-refresh-rate gaming.

Moving to 2560x1440, the performance remains exceptionally strong, comfortably clearing the 60 FPS threshold even at the highest settings. The Low preset reports an average of 208.4 FPS, and the Medium preset follows with 169.4 FPS. The High preset delivers a very smooth 140.1 FPS average. The most demanding Ultra preset at this resolution still achieves an average of 86.9 FPS, which is well above the playability threshold and provides a fluid experience for a horror title where smoothness can be crucial for immersion.

At the demanding 3840x2160 (4K) resolution, the system continues to perform admirably, though it begins to show its limits at the very top end of the settings spectrum. The Low preset produces a high average of 131.2 FPS, while the Medium preset is still very playable at 109.7 FPS. The High preset maintains an average of 88.3 FPS, offering a great balance of visual fidelity and performance. However, the Ultra preset at 4K is the only configuration in the entire dataset that falls below the 60 FPS target, with an average of 56.5 FPS. This indicates that while the hardware is powerful, the combination of 4K resolution and maximum settings presents a significant challenge.

The data reveals a consistent pattern: the performance scaling from Low to Ultra is smooth and substantial. The difference between the Low and Ultra presets at 1080p is a significant margin, and the same holds true at other resolutions. Furthermore, the impact of resolution is clear, with a substantial drop in average FPS when moving from 1440p to 4K at the same settings. The benchmark results indicate a capable system that can be tuned to match a wide range of display capabilities and user preferences.

FAQ

*Q: Can this PC run Downfall at 4K resolution?*

A: Yes, the data shows it can run the game at 4K with the High preset, achieving an average of 88.3 FPS. It can also run the Low and Medium presets at 131.2 FPS and 109.7 FPS respectively. However, the Ultra preset at 4K averages 56.5 FPS, which is below the 60 FPS playability threshold.

Q: What is the best setting to use at 2560x1440 resolution?

A: According to the benchmark data, the Ultra preset is the most demanding setting that maintains an average FPS at or above 60. At 1440p, the Ultra preset achieves an average of 86.9 FPS, making it the recommended choice for maximum visual quality without sacrificing smoothness.

Q: How does the system perform at 1920x1080 on the High preset?

A: The system performs exceptionally well, with an average frame rate of 195.9 FPS. This is far above the 60 FPS threshold and indicates that the hardware is more than capable of delivering a very smooth experience at 1080p with high visual settings.

*Q: Is the Downfall Ultra preset playable at 4K?*

A: No, the data indicates it is not. At 3840x2160 with the Ultra preset, the average FPS is 56.5, which falls short of the 60 FPS playable threshold. For a stable 60 FPS experience at 4K, users should select the High preset.

Q: What is the difference in performance between the Low and Ultra presets at 1080p?

A: The performance gap is substantial. The Low preset yields an average of 293.6 FPS, while the Ultra preset yields an average of 124.4 FPS. This represents a significant reduction of over half the frame rate when moving to the most demanding settings.

Q: Does the combo rank highly among other tested systems for this game?

A: The data shows this combination ranks in the top third of all tested combos. Specifically, it is ranked 1148 out of 3716 total combos tested for Downfall, placing it in the 69th percentile of all GPUs.

Best Settings per Resolution

For players seeking the optimal balance between visual quality and performance, the benchmark data identifies the most demanding preset that still maintains an average of at least 60 FPS.

At 3840x2160, the High preset is the best choice. It is the most demanding setting that stays above the 60 FPS threshold, achieving an average of 88.3 FPS. While the Ultra preset is visually superior, its average of 56.5 FPS falls below the playability target.

At 2560x1440, the Ultra preset is the clear winner. It is the most demanding setting tested and still delivers an excellent average of 86.9 FPS. This allows users to experience the game at its highest visual fidelity at this resolution without worrying about frame rate drops.

At 1920x1080, the Ultra preset is also the recommended setting. The hardware is so powerful at this resolution that it can handle the maximum settings with ease, producing an average of 124.4 FPS. This provides a highly fluid and visually rich experience.

Similar Performance Alternatives

Looking at the nearest rivals for both components provides context for how other hardware would behave in this configuration. The data from the CPU's benchmark scores shows performance very close to several other processors. For instance, the AMD EPYC 7643 has an average score that is only 0.1% lower, and the Intel Core i7-1355U is 0.3% lower. A system with the AMD Ryzen AI 5 330 would be a near-identical match, with a score just 0.7% lower. On the other side, the Intel Core i3-14100F would be a slightly faster alternative, with a score 0.9% higher.

On the graphics card side, the Radeon RX 9070's nearest rivals are a mix of older and mobile parts. The NVIDIA GeForce GTX TITAN Z has an average score that is 0.6% higher, meaning it would perform nearly identically. The AMD Radeon RX 6800S is 0.8% slower, while the NVIDIA GeForce RTX 3080 Mobile is 1.1% faster. A desktop alternative like the NVIDIA GeForce RTX 2080 SUPER would be expected to perform very similarly, with a score 1.2% higher than the RX 9070. These comparisons indicate that the performance of this combo is well-matched by a handful of other hardware configurations.

How This Combo Ranks

The data places this specific combination of the Intel Core i5-12400 and AMD Radeon RX 9070 at rank 1148 out of 3716 tested combinations for Downfall. This puts it in the top 31% of all systems tested, which is a strong showing. The CPU itself, when compared to all other CPUs in the database, sits at the 72nd percentile, and the GPU is at the 69th percentile. This suggests a well-balanced pairing where neither component is a significant bottleneck for the other in this particular game. The high ranking is consistent with the measured FPS data, which shows the system easily handling the game at most settings and resolutions.

The Verdict

The data unequivocally shows that the Intel Core i5-12400 and AMD Radeon RX 9070 can run Downfall with excellent performance. The verdict by resolution is clear and positive. At 1920x1080, all presets, including Ultra, are playable, with an average of 124.4 FPS at the highest setting. At 2560x1440, all four presets are also playable, with the Ultra preset achieving a very smooth 86.9 FPS. Even at the demanding 3840x2160 resolution, the High, Medium, and Low presets are playable, with the High preset being the best option at 88.3 FPS. The only configuration that does not meet the 60 FPS standard is the 4K Ultra preset, which falls short at 56.5 FPS. For the vast majority of users, this system is more than sufficient to enjoy Downfall at high frame rates and high visual quality, making it a highly recommended pairing for this title.