Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 35 | 57 | 70 | 85 |
| 1440p QHD | 55 | 92 | 110 | 138 |
| 1080p Full HD | 78 | 126 | 157 | 194 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
How This Combo Ranks
The Intel Core i5-11400F paired with the NVIDIA GeForce RTX 3060 Ti ranks 2705 out of 3716 tested combinations for Downfall. This places the combo in the lower third of the database's tested configurations, which is a meaningful signal for a horror title that leans on atmosphere and lighting effects rather than raw geometry. The percentile data reinforces this position: the CPU sits at the 71st percentile among all processors, while the GPU lands at the 59th percentile among all graphics cards. The gap between those two figures suggests the graphics card is the more limiting half of this pairing for this particular game.
The rank of 2705 is not a condemnation, but it does indicate that a large portion of the tested hardware pool outperforms this setup. For a game released in 2016, the combination of a 6-core, 12-thread Rocket Lake processor and an Ampere-based mid-range GPU is far from the top of the pile, yet the measured frame rates show it handles the title comfortably at most settings. The data indicates the combo's position is driven more by the GPU's relative standing than by the CPU, which outranks its graphics partner by 12 percentile points.
Best Settings per Resolution
At 3840x2160, the most demanding preset that remains at or above 60 FPS is Medium, which delivers an average of 70.1 FPS. High settings drop to 57.3 FPS, just under the playable threshold, while Ultra falls further to 35 FPS. Low settings produce 84.7 FPS, but Medium offers the best balance of visual quality and performance.
Moving to 2560x1440, the best playable setting is High at 91.5 FPS average. The scaling is favorable here: Low runs at 137.7 FPS, Medium at 109.6 FPS, and Ultra drops to 54.5 FPS, which misses the 60 FPS target. High is the clear choice for this resolution, delivering nearly 32 FPS of headroom above the playable threshold.
At 1920x1080, every preset clears 60 FPS. The most demanding option, Ultra, averages 77.5 FPS, which is the best setting available. Low runs at 194 FPS, Medium at 157.4 FPS, and High at 126 FPS. The 1080p results show the combo has substantial performance reserves at this resolution, with even the heaviest preset staying well above the threshold.
CPU and GPU Roles
The data shows a clear pattern of GPU dominance across all resolutions, but the degree shifts as resolution changes. At 3840x2160, the scaling from Low to Medium to High to Ultra produces a steep drop: 84.7 to 70.1 to 57.3 to 35 FPS. This 49.7 FPS spread between lowest and highest settings indicates the GPU is heavily taxed at 4K, with the render load overwhelming the graphics card well before the CPU becomes a factor.
At 2560x1440, the same setting progression yields 137.7, 109.6, 91.5, and 54.5 FPS. The spread narrows to 83.2 FPS between Low and Ultra, but the pattern remains consistent: the GPU's workload scales nearly linearly with quality settings, while the CPU holds steady. The 1440p results show the RTX 3060 Ti still carries most of the burden, though the CPU's 6 cores and 12 threads are sufficient to feed it without bottlenecking.
At 1920x1080, the pattern shifts. Low runs at 194 FPS, Medium at 157.4, High at 126, and Ultra at 77.5. The absolute frame rates are high across the board, but the relative drop from Low to Ultra is 116.5 FPS, the largest absolute gap of any resolution. This suggests the CPU begins to contribute more at lower resolutions, where the GPU has spare capacity and the processor's single-thread performance (a 3dmark single-thread score of 868) starts to matter. However, even at 1080p Ultra, the combo stays above 60 FPS, indicating neither component is a hard bottleneck at this resolution.
Comparing 4K Medium (70.1 FPS) to 1440p High (91.5 FPS) to 1080p Ultra (77.5 FPS) shows that the most demanding playable setting at each resolution delivers between 70 and 92 FPS. The GPU's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are sufficient for the texture loads at 4K Medium, but the 35 FPS at 4K Ultra points to the GPU's compute limits rather than memory capacity.
Similar Performance Alternatives
Looking at the CPU's nearest rivals, the Intel Core i5-11400F has an average benchmark score of 17177. The AMD EPYC 7H12 scores 17120, a delta of 0.3 percent, meaning it is effectively identical in synthetic performance. The Intel Core i5-12450H scores 17239, 0.4 percent higher, while the AMD Ryzen 3 PRO 8300G scores 17278, 0.6 percent higher. The Intel Core Ultra 7 164U scores 17074, 0.6 percent lower. Any of these processors would produce nearly indistinguishable frame rates in Downfall, as the game's CPU demands are modest and all four rivals sit within a 1.2 percent band of the i5-11400F.
On the GPU side, the RTX 3060 Ti averages 16129 in benchmark scores. The AMD Radeon RX 9060 scores 16014, 0.7 percent lower, while the AMD Radeon Pro 5600M scores 16351, 1.4 percent higher. The AMD Radeon RX 5700 XT scores 16361, 1.4 percent higher, and the AMD Radeon R9 370X scores 15862, 1.7 percent lower. The RX 5700 XT and Pro 5600M are the closest performance matches, with both slightly outperforming the RTX 3060 Ti in aggregate benchmarks. In practice, any of these GPUs would deliver within a few frames per second of the measured results across all settings and resolutions.
The practical takeaway from the rivals data is that users with any of these CPUs or GPUs can expect comparable behavior in Downfall. The differences are small enough that the game's performance would be dictated more by resolution and settings than by which specific chip is installed.
Measured FPS Breakdown
At 3840x2160, the recorded averages are as follows: Low settings produce 84.7 FPS, Medium produces 70.1 FPS, High produces 57.3 FPS, and Ultra produces 35 FPS. Minimum and maximum frame times were not recorded in the database, so the averages alone must guide the analysis. The 4K results show a clear ceiling: Medium is the highest setting that stays playable, and the jump to High costs 12.8 FPS on average.
At 2560x1440, the averages are 137.7 FPS for Low, 109.6 FPS for Medium, 91.5 FPS for High, and 54.5 FPS for Ultra. The 1440p data shows a gentler curve than 4K, with each step up in quality costing between 18.1 and 37.0 FPS. The gap from High to Ultra is the largest at 37.0 FPS, which aligns with the verdict that Ultra is not viable at this resolution.
At 1920x1080, the averages are 194 FPS for Low, 157.4 FPS for Medium, 126 FPS for High, and 77.5 FPS for Ultra. The 1080p results are the most forgiving, with every preset comfortably above 60 FPS. The step from High to Ultra costs 48.5 FPS, the largest single drop in the entire dataset, but the 77.5 FPS average at Ultra still leaves 17.5 FPS of headroom.
Across all resolutions, the pattern is consistent: Low settings always deliver above 84 FPS, Medium stays above 70 FPS at 4K and far higher at lower resolutions, High is playable at 1440p and 1080p but not 4K, and Ultra is only viable at 1080p.
FAQ
Q: Can this combo run Downfall at 4K?
A: Yes, at Low and Medium settings. Medium averages 70.1 FPS at 3840x2160, while High drops to 57.3 FPS and Ultra to 35 FPS. The playable threshold of 60 FPS is cleared at Medium but not at High or Ultra.
Q: What is the best setting at 2560x1440?
A: High is the most demanding preset that stays at or above 60 FPS, with an average of 91.5 FPS. Ultra falls to 54.5 FPS, which is below the playable threshold.
Q: Is Ultra settings playable at 1920x1080?
A: Yes. Ultra averages 77.5 FPS at 1080p, which clears the 60 FPS threshold by 17.5 FPS. All four presets (Low, Medium, High, Ultra) are playable at this resolution.
Q: How does the CPU compare to its nearest rivals?
A: The Intel Core i5-11400F has an average benchmark score of 17177. The AMD EPYC 7H12 is 0.3 percent lower, the Intel Core i5-12450H is 0.4 percent higher, the AMD Ryzen 3 PRO 8300G is 0.6 percent higher, and the Intel Core Ultra 7 164U is 0.6 percent lower. All fall within a narrow 1.2 percent band.
Q: How does the GPU compare to its nearest rivals?
A: The RTX 3060 Ti averages 16129 in benchmark scores. The AMD Radeon RX 9060 is 0.7 percent lower, the AMD Radeon Pro 5600M is 1.4 percent higher, the AMD Radeon RX 5700 XT is 1.4 percent higher, and the AMD Radeon R9 370X is 1.7 percent lower.
Q: What frame rate does the combo achieve at 1440p Low settings?
A: At 2560x1440 with Low settings, the average FPS is 137.7. This is the highest average at that resolution, with Medium at 109.6 and High at 91.5.
The Verdict
The data confirms this PC can run Downfall, but the answer depends heavily on resolution and settings. At 1920x1080, the combo is fully capable: every preset from Low to Ultra clears 60 FPS, with Ultra averaging 77.5 FPS. This is the resolution where the system shows its best overall performance, offering the widest range of playable options.
At 2560x1440, the system remains strong but loses Ultra settings. High averages 91.5 FPS, which is excellent, while Medium and Low are also playable. Users at this resolution should stick to High as the best visual quality that stays comfortably above 60 FPS.
At 3840x2160, the system is limited to Low and Medium settings. Medium averages 70.1 FPS, which is playable but leaves little headroom. High drops to 57.3 FPS and Ultra to 35 FPS, both below the playable threshold. The combo rank of 2705 out of 3716 reflects this mixed performance: strong at 1080p, capable at 1440p, and constrained at 4K.
Overall, this is a capable 1080p and 1440p machine for Downfall, with 4K available only at reduced quality settings. The GPU's 59th percentile standing is the binding constraint at higher resolutions, while the CPU's 71st percentile rank ensures it is not the limiting factor in any tested configuration.