Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

52%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
200 FPS
Ultra 1080p Measured
86 FPS

1440p (2K / QHD)

Low 1440p Measured
140 FPS
Ultra 1440p Measured
62 FPS

4K (Ultra HD)

Low 4K Measured
90 FPS
Ultra 4K Measured
36 FPS
7.5ms Frame Time
11ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 17,177
Graphics Card
Required 27,400
Your GPU 17,083

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 36 62 71 90
1440p QHD 62 96 118 140
1080p Full HD 86 133 165 200

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 133
1920x1080 Low 200
1920x1080 Medium 165
1920x1080 Ultra 86
2560x1440 High 96
2560x1440 Low 140
2560x1440 Medium 118
2560x1440 Ultra 62
3840x2160 High 62
3840x2160 Low 90
3840x2160 Medium 71
3840x2160 Ultra 36

Performance Analysis: Downfall on Your System

Best Settings per Resolution

For 1920x1080, the most demanding preset that maintains at or above 60 FPS is Ultra, with an average of 85.6 FPS. This leaves substantial headroom above the 60 FPS threshold, making Ultra the clear choice for full visual fidelity at this resolution.

At 2560x1440, the best playable setting is also Ultra, delivering 62.2 FPS on average. While this clears the 60 FPS bar, the margin is slim, so players who prioritize smoothness over maximum detail may prefer High, which runs at 95.5 FPS and offers considerably more performance cushion.

For 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average of 61.5 FPS. The Ultra preset at 4K drops to 35.5 FPS, which falls well short of the playable threshold. Medium at 4K produces 70.6 FPS, offering a more comfortable experience if High proves too demanding in scenes with heavy action.

The data shows a consistent pattern: this system handles Ultra settings comfortably at 1080p and 1440p, but 4K requires a step down to High for playable frame rates.

CPU and GPU Roles

The scaling between presets and resolutions reveals which component dominates performance in Downfall. At 1920x1080, moving from Low to Ultra reduces average FPS from 200.4 to 85.6, a drop of approximately 57%. This steep decline with increasing visual complexity indicates the GPU is the primary driver at this resolution, as the CPU has ample headroom to feed frames at lower settings.

At 2560x1440, the same preset transition goes from 139.5 FPS (Low) down to 62.2 FPS (Ultra). The proportional drop is similar, but the overall lower frame rates suggest the GPU is working harder to fill more pixels. The gap between Low and Medium at 1440p is 21.8 FPS (139.5 to 117.7), while the gap between Medium and High is 22.2 FPS (117.7 to 95.5). These consistent steps point to GPU-bound scaling.

The 3840x2160 results reinforce this: Low runs at 89.8 FPS, Medium at 70.6 FPS, and High at 61.5 FPS. The Ultra preset collapses to 35.5 FPS, a dramatic 42% drop from High. This nonlinear falloff at the highest preset is typical of GPU memory bandwidth or shading unit saturation, indicating the Radeon RX 7600 XT is the limiting factor at 4K.

The CPU, an Intel Core i5-11400F with 6 cores and 12 threads, never appears to bottleneck in these measurements. At 1080p Low, the system reaches 200.4 FPS, which is far beyond what a CPU-limited scenario would typically show for a horror title of this era. The consistent frame rate scaling across resolutions points to a GPU-centric workload, with the CPU providing sufficient throughput even at high frame rates.

In practical terms, users upgrading the GPU would see gains at all resolutions, while a CPU upgrade would likely yield minimal improvement unless paired with a much faster graphics card.

FAQ

Q: Can this system run Downfall at 4K with playable frame rates?

A: Yes, but not at maximum settings. The 3840x2160 High preset averages 61.5 FPS, just above the 60 FPS threshold. Medium at 4K runs at 70.6 FPS, and Low at 89.8 FPS. Ultra at 4K is not playable at 35.5 FPS.

Q: What is the best settings preset at 1440p?

A: Ultra is playable at 1440p with an average of 62.2 FPS. However, High provides significantly more headroom at 95.5 FPS, which may be preferable for consistent performance in demanding scenes.

Q: How much performance does the Ultra preset cost compared to High?

A: At 1080p, Ultra runs at 85.6 FPS versus 133.3 FPS for High, a difference of 47.7 FPS. At 1440p, the gap is 33.3 FPS (62.2 vs 95.5). At 4K, Ultra drops to 35.5 FPS versus 61.5 FPS for High, a loss of 26 FPS.

Q: Is the CPU or GPU more important for Downfall?

A: The benchmark data indicates the GPU is the dominant factor. Frame rates scale strongly with preset changes and resolution increases, while the CPU maintains very high frame rates at low settings (up to 200.4 FPS at 1080p Low), suggesting it is not a limiting factor.

Q: What frame rate can I expect at 1080p with Medium settings?

A: The system averages 165.2 FPS at 1080p Medium. This is well above the playable threshold and leaves ample headroom for streaming or recording.

Q: Does the system meet the 60 FPS threshold at every resolution?

A: No. At 4K Ultra, the average is 35.5 FPS, which is below the 60 FPS threshold. All other tested presets at all three resolutions clear 60 FPS, including 4K High at 61.5 FPS.

Similar Performance Alternatives

The Intel Core i5-11400F sits at the 71st percentile among all CPUs in the database, with an average benchmark score of 17177. Its nearest rivals are clustered within a narrow band. The AMD EPYC 7H12 scores 17120, just 0.3% lower. The Intel Core i5-12450H scores 17239, 0.4% higher. The AMD Ryzen 3 PRO 8300G scores 17278, 0.6% higher, while the Intel Core Ultra 7 164U scores 17074, 0.6% lower. Systems built with any of these CPUs would deliver nearly identical performance in Downfall, with differences well below 1% in synthetic benchmarks.

For the AMD Radeon RX 7600 XT, which holds the 60th percentile among GPUs with an average score of 17083, the nearest rivals are similarly close. The NVIDIA GeForce GTX 690 scores 17037, just 0.3% lower. The AMD Radeon HD 7970M scores 17019, 0.4% lower. The NVIDIA GeForce RTX 3070 scores 17208, 0.7% higher, and the NVIDIA Tesla M4 scores 16932, 0.9% lower. In practical terms, a system swapping the RX 7600 XT for any of these cards would produce nearly indistinguishable frame rates in Downfall, given the sub-1% performance deltas.

Measured FPS Breakdown

At 1920x1080, the full preset range was measured. Low settings produce an average of 200.4 FPS. Medium settings average 165.2 FPS. High settings average 133.3 FPS. Ultra settings average 85.6 FPS. All presets at this resolution clear the 60 FPS threshold by a wide margin.

At 2560x1440, Low averages 139.5 FPS. Medium averages 117.7 FPS. High averages 95.5 FPS. Ultra averages 62.2 FPS. The step from High to Ultra represents the largest relative drop, at 33.3 FPS, confirming Ultra as the most demanding setting tier.

At 3840x2160, Low averages 89.8 FPS. Medium averages 70.6 FPS. High averages 61.5 FPS. Ultra averages 35.5 FPS. This resolution shows the most dramatic falloff, with Ultra falling below the playable threshold while High remains viable.

The Verdict

The data confirms this system can run Downfall successfully across most tested configurations. At 1920x1080, every preset including Ultra clears 60 FPS, making this the most comfortable resolution for the game. The Ultra preset at 85.6 FPS provides both high visual quality and smooth gameplay.

At 2560x1440, all four presets are playable, including Ultra at 62.2 FPS. This makes 1440p a viable option for users who want higher resolution without sacrificing the highest detail settings, though the frame rate margin at Ultra is modest.

At 3840x2160, the system supports High, Medium, and Low settings, with High averaging 61.5 FPS. The Ultra preset is not playable at 35.5 FPS. Users targeting 4K should stick to High or Medium for a stable experience.

Overall, the system is well-suited for Downfall, with playable performance at 1080p and 1440p across all settings, and at 4K with a one-step reduction from Ultra to High.

How This Combo Ranks

The combination of the Intel Core i5-11400F and AMD Radeon RX 7600 XT ranks 2371st out of 3716 tested system combinations in the database for Downfall. This places the system in the upper-middle portion of all tested configurations, roughly in the 36th percentile of combos (calculated from rank divided by total).

Given that the CPU ranks at the 71st percentile among all CPUs and the GPU at the 60th percentile among all GPUs, the combined system ranking is lower than either individual component percentile. This suggests that the game's performance characteristics do not fully utilize the strengths of both components, or that the GPU's performance class limits the overall system ranking relative to other tested combos.

The system's ability to run Ultra at 1440p and High at 4K indicates it performs well above average for a modern gaming setup, even while ranking below many higher-end configurations in the database. For a horror title with modest system demands, this combo delivers strong results, with only the 4K Ultra preset falling out of the playable range.