Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

68%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
371 FPS
Ultra 1080p Measured
157 FPS

1440p (2K / QHD)

Low 1440p Measured
262 FPS
Ultra 1440p Measured
110 FPS

4K (Ultra HD)

Low 4K Measured
162 FPS
Ultra 4K Measured
70 FPS
4.1ms Frame Time
6ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 13,494
Graphics Card
Required 27,400
Your GPU 31,087

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 70 112 137 162
1440p QHD 110 179 216 262
1080p Full HD 157 244 303 371

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 244
1920x1080 Low 371
1920x1080 Medium 303
1920x1080 Ultra 157
2560x1440 High 179
2560x1440 Low 262
2560x1440 Medium 216
2560x1440 Ultra 110
3840x2160 High 112
3840x2160 Low 162
3840x2160 Medium 137
3840x2160 Ultra 70

Performance Analysis: Downfall on Your System

The Intel Core i3-12100F paired with the NVIDIA GeForce RTX 4070 Ti SUPER delivers exceptionally high frame rates in Downfall across all tested resolutions and settings. Benchmark data shows this combination consistently exceeds the 60 FPS playability threshold, with the lowest recorded average being 70.1 FPS at 4K Ultra settings. The GPU’s raw performance dominates this pairing, as the i3-12100F’s four cores prove sufficient to feed the RTX 4070 Ti SUPER even at high resolutions and demanding presets.

Measured FPS Breakdown

At 1920x1080, the combination produces extreme frame rates that far exceed display refresh rate capabilities. Low settings yield an average of 370.7 FPS, while Medium settings still produce 303.3 FPS. High settings drop to 244.4 FPS, and Ultra settings maintain a robust 157 FPS average. The scaling between presets shows a 59.6% reduction from Low to Ultra, but even the most demanding setting remains more than 2.5 times above the 60 FPS threshold.

Moving to 2560x1440, the performance scales down proportionally but remains overwhelmingly playable. Low settings average 262.3 FPS, Medium settings deliver 215.7 FPS, and High settings produce 179.3 FPS. Ultra settings at 1440p still achieve 109.6 FPS, which is 82.7% higher than the playability threshold. The gap between Low and Ultra at this resolution is 58.2%, slightly less than at 1080p, indicating that the GPU remains the dominant factor.

At 3840x2160, performance remains impressive for a 4K resolution. Low settings average 162.4 FPS, Medium settings produce 137.1 FPS, and High settings deliver 111.5 FPS. Ultra settings at 4K yield 70.1 FPS, which clears the 60 FPS threshold by 16.8%. The reduction from 1440p to 4K at Ultra settings is 36.0%, showing that resolution scaling has a measurable but not crippling impact on this hardware configuration.

The data shows no minimum or maximum FPS values recorded, meaning the analysis relies solely on average performance metrics. All 12 measured configurations—four settings across three resolutions—produce average frame rates above 70 FPS, with the lowest being 4K Ultra at 70.1 FPS and the highest being 1080p Low at 370.7 FPS.

FAQ

*Q: Can this PC run Downfall at 4K Ultra settings?*

A: Yes. The measured average FPS at 3840x2160 Ultra is 70.1 FPS, which exceeds the 60 FPS playable threshold by 16.8%. This is the most demanding configuration tested and it remains comfortably playable.

Q: What is the best settings preset for 1440p gaming?

A: Ultra settings at 2560x1440 produce an average of 109.6 FPS, making it the highest quality preset that maintains performance well above the playability threshold. All four presets at this resolution exceed 100 FPS.

Q: How does the 1080p performance compare to higher resolutions?

A: At 1920x1080, Ultra settings deliver 157 FPS, which is 43.2% higher than 1440p Ultra and 123.9% higher than 4K Ultra. Low settings at 1080p reach 370.7 FPS, the highest average recorded in the entire benchmark set.

Q: Is the RTX 4070 Ti SUPER bottlenecked by the i3-12100F in this game?

A: The data indicates minimal CPU bottlenecking. Performance scales consistently with resolution and preset changes, suggesting the GPU remains the primary performance driver. The i3-12100F’s 4 cores and 8 threads appear sufficient for Downfall’s engine demands across all tested configurations.

Q: What frame rate can be expected at 4K High settings?

A: The measured average at 3840x2160 High is 111.5 FPS. This is 85.8% higher than the 60 FPS threshold and represents a 59.1% improvement over 4K Ultra settings.

Q: Does lowering settings from Ultra to High provide a significant FPS boost at 4K?

A: Yes. At 3840x2160, moving from Ultra (70.1 FPS) to High (111.5 FPS) yields a 59.1% performance increase. The jump from High to Medium (137.1 FPS) adds another 23.0%, while Medium to Low (162.4 FPS) provides an additional 18.4%.

CPU and GPU Roles

The benchmark data reveals that the NVIDIA GeForce RTX 4070 Ti SUPER is the dominant component in this pairing for Downfall. The evidence lies in the consistent performance scaling across resolutions. At 1080p Low, the system achieves 370.7 FPS, but dropping to 1440p Low reduces performance to 262.3 FPS—a 29.2% decrease. Moving further to 4K Low yields 162.4 FPS, another 38.1% reduction. These resolution-based drops are characteristic of GPU-bound workloads, where the rendering resolution directly impacts the graphics card’s output.

The CPU’s role becomes more apparent when examining preset scaling at fixed resolutions. At 1080p, moving from Low to Ultra reduces frame rates from 370.7 to 157 FPS, a 57.6% drop. At 1440p, the same preset change reduces performance from 262.3 to 109.6 FPS, a 58.2% drop. At 4K, the drop is 56.8% (162.4 to 70.1 FPS). The consistency of these percentage drops across resolutions suggests that the game’s graphics settings impose a uniform load increase regardless of resolution, with the GPU handling both aspects without significant CPU interference.

The i3-12100F’s benchmark scores contextualize its capability. Its Cinebench R23 multi-core score of 11860 and single-core score of 1674 indicate a processor that ranks in the 68th percentile among all CPUs. For a horror game like Downfall, which typically relies on fewer threads, the CPU’s single-thread performance (3dmark single-thread score of 893) proves adequate. The fact that 4K Ultra still achieves 70.1 FPS—where GPU load is highest and CPU overhead minimal—demonstrates that the i3-12100F does not create a performance ceiling that limits the RTX 4070 Ti SUPER in this specific title.

The Verdict

This combination can definitively run Downfall at every resolution and preset configuration tested. The verdict by resolution confirms that all four settings—Low, Medium, High, and Ultra—are playable at 1920x1080, 2560x1440, and 3840x2160, with every configuration exceeding the 60 FPS threshold.

At 4K, the most demanding scenario, Ultra settings produce 70.1 FPS, clearing the playability threshold by 10.1 FPS. This is a playable result, though it leaves less headroom than lower resolutions. At 1440p, Ultra settings achieve 109.6 FPS, providing a 49.6 FPS margin over the threshold and enabling high-refresh-rate gaming on 120Hz displays. At 1080p, Ultra settings deliver 157 FPS, which supports 144Hz and 165Hz displays with substantial headroom.

The system’s weakest configuration—4K Ultra—still performs 16.8% above the playable threshold, indicating that this hardware pairing is not merely adequate but comfortably capable for Downfall. Users seeking maximum visual fidelity at 4K will find playable performance, while those prioritizing frame rates can achieve exceptional results at lower resolutions.

Best Settings per Resolution

At 3840x2160, the most demanding preset that maintains at least 60 FPS is Ultra, which achieves an average of 70.1 FPS. This is the highest quality setting available in the benchmark data and it clears the threshold by 10.1 FPS. Players can enjoy maximum visual fidelity at 4K without compromising playability.

At 2560x1440, Ultra settings deliver 109.6 FPS, making it the best choice for this resolution. The 49.6 FPS margin above the threshold allows for smooth gameplay even during demanding scenes. This configuration provides an excellent balance of visual quality and performance for high-refresh-rate monitors.

At 1920x1080, Ultra settings produce 157 FPS, which is the best settings choice for this resolution. The 97 FPS margin over the threshold is substantial, enabling gameplay on 144Hz and 165Hz displays with no risk of dropping below 60 FPS. This configuration maximizes visual quality while maintaining extremely high frame rates.

How This Combo Ranks

The Intel Core i3-12100F and NVIDIA GeForce RTX 4070 Ti SUPER combination ranks 417th out of 3716 tested combos for Downfall. This places it in the top 11.2% of all configurations benchmarked for this game. The rank reflects the GPU’s strong performance, as the RTX 4070 Ti SUPER sits in the 76th percentile among all GPUs with an average benchmark score of 31087.

The CPU ranks in the 68th percentile among all processors with an average benchmark score of 13494. The combination of a mid-tier CPU with a high-tier GPU results in a system that performs exceptionally well in this GPU-bound title. The 417th rank out of 3716 combos indicates that this pairing outperforms most alternative configurations, with only 416 combos achieving higher performance in Downfall.

Similar Performance Alternatives

The i3-12100F’s nearest CPU rivals, based on average benchmark scores, include the Intel Core 3 N355 with an average score of 13492 (0% delta), the Intel Core i5-9500 at 13452 (0.3% delta), the Intel Core 5 120UL at 13594 (-0.7% delta), and the Intel Core i7-1250U at 13351 (1.1% delta). These processors would behave similarly to the i3-12100F in Downfall, providing comparable CPU-bound performance when paired with the same GPU.

The RTX 4070 Ti SUPER’s nearest GPU rivals include the NVIDIA Quadro M5000 with an average score of 31206 (-0.4% delta), the NVIDIA GRID M60-1Q at 31220 (-0.4% delta), the NVIDIA RTX PRO 4500 Blackwell at 31532 (-1.4% delta), and the NVIDIA TITAN RTX at 31676 (-1.9% delta). Users considering alternative GPUs in this performance class could expect nearly identical frame rates in Downfall, with performance deltas of less than 2% across all rivals.

For a system using the i3-12100F, swapping the GPU to any of these alternatives would yield FPS results within approximately 2% of the RTX 4070 Ti SUPER’s output. Similarly, pairing the RTX 4070 Ti SUPER with any of the listed CPU alternatives would produce CPU-bound performance nearly identical to the i3-12100F, with benchmark score differences ranging from -0.7% to +1.1%. This indicates that the tested combination sits within a tightly clustered performance envelope, and nearby hardware choices would produce similar gameplay experiences in Downfall.