Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 36 | 58 | 71 | 87 |
| 1440p QHD | 59 | 94 | 114 | 140 |
| 1080p Full HD | 82 | 131 | 160 | 196 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
Downfall is a point-and-click horror title from early 2016, and the pairing of AMD's Ryzen AI Max+ 395 with NVIDIA's GeForce RTX 5060 treats it accordingly: the recorded data shows frame rates that are far beyond what this game demands, with every resolution and almost every preset clearing the 60 FPS playability threshold. The database contains measured results across 1920x1080, 2560x1440, and 3840x2160 at four preset levels each, and the spread tells a consistent story of surplus performance.
Measured FPS Breakdown
At 1920x1080, the RTX 5060 delivers 196 FPS on Low, 160 FPS on Medium with a minimum of 136 and a maximum of 184, 131 FPS on High, and 82 FPS on Ultra. Even the most demanding preset leaves a 22 FPS cushion over the 60 FPS threshold, and the Medium-preset minimum of 136 FPS indicates that frame times stay smooth throughout rather than averaging high while dipping into stutter territory.
Moving to 2560x1440 shifts the curve down but changes nothing about playability. Low averages 140 FPS, Medium averages 114 FPS with a recorded minimum of 97 and maximum of 132, High averages 94 FPS, and Ultra lands at 59 FPS, a single frame shy of the threshold. That Ultra result is the only sub-60 average anywhere in the dataset outside of 4K's top preset, and it sits close enough that modest in-game adjustments could nudge it over the line, though the recorded data treats it as below the bar.
At 3840x2160 the pattern completes. Low averages 87 FPS, Medium averages 71 FPS with a minimum of 61 and a maximum of 82, High averages 58 FPS, and Ultra drops to 36 FPS. Medium at 4K is the most instructive data point: the minimum of 61 FPS stays above the threshold even at the heaviest resolution where Medium figures were captured with full min/max detail, meaning the experience holds up in the worst measured moments, not just on average. High at 58 FPS misses the cutoff by 2 frames on average, and Ultra's 36 FPS is squarely unplayable by the database's standard.
Comparing across resolutions at a fixed preset quantifies the scaling. Medium goes from 160 FPS at 1080p to 114 at 1440p, a drop of 46 frames, then to 71 at 4K, a further drop of 43. Low falls from 196 to 140 to 87. The declines are roughly proportional, which suggests the GPU is being fed consistently and the Ryzen AI Max+ 395 is not introducing a bottleneck at any point in the stack.
How This Combo Ranks
Within Downfall specifically, this CPU and GPU pairing ranks 2467 out of 3716 tested combinations in the database. That places it in the back two-thirds of tested hardware for this particular game, which deserves context: Downfall released in 2016 and simply does not scale with modern high-end hardware the way current titles do, so rankings compress and ordering can look counterintuitive. A rank of 2467th reflects the game's low ceiling more than any weakness in this pairing.
Looking at the components individually, the Ryzen AI Max+ 395 sits in the 95th percentile against all CPUs in the database, with an average benchmark score of 77740. Its single-core results include 316 in Cinebench R15 and 2044 in Cinebench R23, plus a Geekbench single-core score of 2464, and its multi-core figures (35314 in R23, 20992 in Geekbench multicore, 54934 in PassMark multithread) confirm substantial headroom for a 16-core, 32-thread Zen 5 part running at up to a 5.10 boost clock within a 55 W envelope.
The RTX 5060 occupies the 72nd percentile among GPUs with an average benchmark score of 26331. Its PassMark G3D score of 20891, 3DMark Steel Nomad DX12 score of 3628, and Geekbench Vulkan score of 113321 describe a mid-range Blackwell card with 8 GB of GDDR7 on a 128-bit bus delivering 448 GB/s of bandwidth and 19.18 TFLOPS of FP32 compute. For a game of this vintage, that is more than sufficient at every resolution tested below 4K Ultra.
Similar Performance Alternatives
On the CPU side, the database identifies four rivals clustered tightly around the Ryzen AI Max+ 395's average score. The Intel Core i9-14900K actually scores 1.7 percent higher, while the AMD Ryzen Threadripper PRO 9945WX and AMD EPYC Embedded 8224P both sit 1.6 percent below, and the AMD Ryzen 9 8945HX is 2 percent behind. In practical terms for Downfall, all four would deliver indistinguishable frame rates next to this chip, because a 2016 horror adventure is resolved by single-thread grunt and basic GPU throughput long before 16 cores come into play. The Ryzen AI Max+ 395's PassMark single-thread score of 4147 is comfortably past anything this game asks of a processor.
On the GPU side, the nearest rivals are an unusual mix that illustrates how the database's aggregate scoring works. The AMD Radeon 860M and NVIDIA GeForce MX550 both score within 0.3 percent of the RTX 5060's average, the AMD Radeon RX 5700 XT 50th Anniversary is 0.8 percent ahead, and the AMD Radeon RX 6750 XT is 1.2 percent behind. Any of these cards would reproduce the measured Downfall results within a small margin, though the RTX 5060's modern feature set, including DirectX 12 Ultimate support and 30 RT cores, gives it headroom in heavier titles that Downfall itself never exercises.
The Verdict
Yes, this PC runs Downfall, and it does so at every resolution with room to spare on appropriate presets. At 1920x1080, all four presets clear 60 FPS, up to Ultra at 82 FPS. At 2560x1440, Low, Medium, and High clear the threshold with High at 94 FPS serving as the best playable setting; only Ultra at 59 FPS falls short, and narrowly. At 3840x2160, Low at 87 FPS and Medium at 71 FPS are playable, with Medium as the recommended setting, while High at 58 FPS and Ultra at 36 FPS do not qualify.
The short version: 1080p is fully covered at maximum settings, 1440p is covered through High, and 4K is covered through Medium. For a horror game built around atmosphere and scripted pacing rather than reflexes, the Medium-at-4K result with its 61 FPS minimum is effectively a flawless experience.
FAQ
Q: Can the Ryzen AI Max+ 395 and RTX 5060 run Downfall at 4K?
A: Yes, at Low and Medium presets. Medium averages 71 FPS with a minimum of 61 FPS, while High (58 FPS) and Ultra (36 FPS) fall below the 60 FPS threshold.
Q: What is the highest setting that stays above 60 FPS at 1440p?
A: High, at an average of 94 FPS. Ultra averages 59 FPS at 2560x1440, missing the threshold by one frame.
Q: How does the game perform at 1080p on Ultra?
A: It averages 82 FPS, a comfortable margin over the 60 FPS playability line, making 1920x1080 Ultra the top validated configuration for this pairing.
Q: How does this hardware combo rank against others tested in Downfall?
A: It ranks 2467 out of 3716 combinations, a placement that reflects the game's limited scaling with modern hardware rather than any deficiency in this pairing.
Q: Is the RTX 5060 a strong GPU in the broader database?
A: It sits in the 72nd percentile of all GPUs, with rivals including the Radeon RX 6750 XT (1.2 percent behind) and the Radeon RX 5700 XT 50th Anniversary (0.8 percent ahead).
Q: Does the CPU ever bottleneck the results?
A: Nothing in the data suggests it. Frame rates scale proportionally with resolution and preset, and the Ryzen AI Max+ 395's 95th-percentile CPU standing, including a PassMark single-thread score of 4147, leaves ample headroom for a 2016 title.
Best Settings per Resolution
- 1920x1080: Ultra, 82 FPS average. The most demanding preset in the game stays 22 frames above the threshold.
- 2560x1440: High, 94 FPS average. Ultra drops to 59 FPS here, so High is the top preset that holds the line.
- 3840x2160: Medium, 71 FPS average. With a minimum of 61 FPS, this is the most demanding 4K preset that remains at or above 60 FPS throughout the measured run.