Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 31 | 50 | 61 | 74 |
| 1440p QHD | 50 | 80 | 97 | 119 |
| 1080p Full HD | 70 | 112 | 136 | 166 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
Downfall, a 2016 horror title, places light demands on modern hardware, and the pairing of the AMD Ryzen AI Max+ 395 with the NVIDIA GeForce RTX 5050 clears the 60 FPS threshold in nearly every tested configuration. The recorded data shows average framerates ranging from 31 FPS at 4K Ultra up to 166 FPS at 1080p Low, which frames this as a GPU-limited scenario at every resolution. With the CPU sitting in the 95th percentile of all processors in the database and the GPU in the 66th percentile, the graphics card is clearly the component that determines settings headroom in this game.
CPU and GPU Roles
The Ryzen AI Max+ 395 is a 16-core, 32-thread Zen 5 processor (Strix Halo codename) built on TSMC's 4 nm node, boosting to 5.10 GHz with a 55 W TDP. It posts a Cinebench R23 multi-core score of 35314 and a single-core score of 2044, plus a Geekbench single-core result of 2464. These are strong numbers for a mobile-segment part, and in a game released in February 2016 they leave the processor with enormous headroom. Nothing in the measured data suggests the CPU is a bottleneck at any point.
The evidence is in the scaling pattern. From 1080p Medium to 1440p Medium, the average framerate drops from 136 FPS to 97 FPS, and from 1440p Medium to 4K Medium it drops further to 61 FPS. That is a consistent, resolution-driven decline rather than a plateau, which is the signature of GPU-bound behavior. If the CPU were the limiter, framerates would flatten as resolution rises; instead they fall in proportion to pixel count. The same pattern holds across presets: 1080p Low delivers 166 FPS while 4K Low delivers 74 FPS, a drop driven entirely by the RTX 5050's rendering load.
Preset scaling reinforces this. At 1080p, moving from Low to Ultra cuts the average from 166 FPS to 70 FPS, a steep penalty for visual settings. The RTX 5050, with 2560 shading units, 8 GB of GDDR6 on a 128-bit bus, and 13.17 TFLOPS of FP32 throughput, is a mid-tier Blackwell 2.0 part, and in Downfall it is the component whose limits define the playable envelope at each resolution.
Best Settings per Resolution
At 1920x1080, Ultra is the most demanding preset that stays at or above 60 FPS, averaging exactly 70 FPS. At 2560x1440, High is the ceiling, averaging 80 FPS; Ultra falls to 50 FPS there and misses the threshold. At 3840x2160, Medium is the limit at 61 FPS average, with High dropping to 50 FPS and Ultra to 31 FPS. In short, every resolution has at least one preset above the 60 FPS line, but each step up in resolution costs roughly one preset tier of headroom.
FAQ
Q: Can this PC run Downfall at 4K?
A: Yes, but only at Low or Medium settings. Medium averages 61 FPS with a recorded minimum of 51 and maximum of 70, while High averages 50 FPS and Ultra averages 31 FPS, both below the 60 FPS threshold.
Q: Which component limits performance in Downfall?
A: The GPU. Framerates scale down consistently as resolution rises (136 FPS at 1080p Medium versus 61 FPS at 4K Medium), indicating the RTX 5050 is the bottleneck. The Ryzen AI Max+ 395, in the 95th percentile of all CPUs in the database, has ample headroom for this 2016 title.
Q: What is the highest framerate recorded for this combo in Downfall?
A: 166 FPS average at 1920x1080 on the Low preset. The 1080p Medium preset recorded a maximum of 157 FPS in the frame-by-frame data.
Q: Does Downfall run at 60 FPS at 1440p on max settings?
A: No. Ultra at 2560x1440 averages 50 FPS. High is the best preset that clears the bar, at 80 FPS average.
Q: How consistent are framerates at 4K Medium?
A: Reasonably consistent. The recorded data shows a minimum of 51 FPS and a maximum of 70 FPS around the 61 FPS average, so dips stay close to the mean.
Q: How does this hardware combination rank among tested combos for Downfall?
A: It ranks 2977 out of 3716 tested combinations, placing it in the lower portion of the field for this specific game.
The Verdict
Yes, this PC runs Downfall at every resolution, with the caveat that settings must be tuned at 4K. At 1920x1080, all four presets are playable and Ultra is the clear choice at 70 FPS average. At 2560x1440, Low, Medium, and High all clear 60 FPS, with High the best option at 80 FPS average; Ultra at 50 FPS is the only 1440p miss. At 3840x2160, only Low (74 FPS) and Medium (61 FPS) are playable, and Medium is the recommended balance since it stays above the threshold while High and Ultra do not. For a single recommendation: 1080p Ultra or 1440p High deliver the best visual-to-framerate trade-off in the recorded data.
Measured FPS Breakdown
At 1920x1080, the Low preset averages 166 FPS, Medium averages 136 FPS with a minimum of 116 and a maximum of 157, High averages 112 FPS, and Ultra averages 70 FPS. The gap between High and Ultra, 42 FPS, is the single largest preset-to-preset drop at this resolution, suggesting Ultra-specific effects such as higher-detail assets weigh heavily on the RTX 5050.
At 2560x1440, Low averages 119 FPS, Medium averages 97 FPS with a minimum of 83 and a maximum of 112, High averages 80 FPS, and Ultra averages 50 FPS. The Medium preset's spread is tight, roughly 29 FPS between minimum and maximum, indicating stable frame delivery well above the 60 FPS line.
At 3840x2160, Low averages 74 FPS, Medium averages 61 FPS with a minimum of 51 and a maximum of 70, High averages 50 FPS, and Ultra averages 31 FPS. The Medium result is the most marginal pass in the dataset, sitting just 1 FPS above the threshold on average, so players sensitive to dips should consider Low, which retains a 14 FPS average cushion over the bar.
How This Combo Ranks
Against the full field of tested combinations for Downfall, this pairing ranks 2977 out of 3716, which places it toward the bottom third. That position reflects the pairing profile rather than unplayable performance: the Ryzen AI Max+ 395 is an elite CPU (95th percentile, average benchmark score of 77740), but the RTX 5050 is a mid-tier GPU (66th percentile, average benchmark score of 21035), and since Downfall is GPU-bound on this hardware, the combination's rank tracks the graphics card, not the processor. A stronger GPU paired with a weaker CPU would likely rank higher in this specific game.
Similar Performance Alternatives
For the CPU side, the database lists several near-equals by average score. The AMD Ryzen Threadripper PRO 9945WX sits within 1.6 percent, the AMD EPYC Embedded 8224P also within 1.6 percent, the Intel Core i9-14900K is 1.7 percent ahead, and the AMD Ryzen 9 8945HX trails by 2 percent. Any of these processors would provide effectively identical CPU performance in Downfall, though given the game's GPU-bound character on this hardware, the CPU choice is largely irrelevant to framerate here.
On the GPU side, the RTX 5050's closest rivals by average score are the AMD Radeon RX Vega M GL (0.6 percent ahead), the AMD Radeon HD 8970M (1 percent ahead), the AMD Radeon RX 5600 XT (1.6 percent behind), and the NVIDIA RTX A4000 Mobile (1.6 percent ahead). Swapping the RTX 5050 for any of these cards should produce framerates within a few percent of the recorded numbers, meaning the same preset ceilings apply: 1080p Ultra at roughly 70 FPS, 1440p High around 80 FPS, and 4K Medium near the 61 FPS mark. Players wanting to move up a preset tier at 4K or 1440p Ultra would need a GPU from a higher tier than any of these listed rivals.