Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 90 | 144 | 175 | 214 |
| 1440p QHD | 144 | 231 | 282 | 345 |
| 1080p Full HD | 202 | 324 | 395 | 482 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The data for Downfall shows a decisive performance outcome for the AMD Ryzen 9 9950X3D paired with the NVIDIA GeForce RTX 5090 D. This combination delivers exceptionally high frame rates across all tested resolutions and settings, with the only potential bottleneck appearing at the most demanding 4K Ultra preset. The measured results place this combo in the top tier of tested hardware configurations.
FAQ
Q: What is the highest average frame rate this combo achieves in Downfall?
A: The highest recorded average is 482 FPS at 1920x1080 resolution with Low settings. This drops to 345 FPS at 2560x1440 and 214 FPS at 3840x2160 under the same Low preset.
Q: Can this system maintain 60 FPS at 4K with maximum settings?
A: Yes. At 3840x2160 with Ultra settings, the average frame rate is 90 FPS, which is 30 FPS above the 60 FPS playable threshold. All four settings presets (Low, Medium, High, Ultra) at 4K clear the 60 FPS mark.
Q: How does the CPU benchmark score compare to its closest rivals?
A: The AMD Ryzen 9 9950X3D has an average benchmark score of 75779, which is only 0.1% higher than the AMD Ryzen 7 PRO 9755 (75738) and the AMD Ryzen 7 PRO 9755X3D (75716). It also leads the AMD EPYC 8224P (75582) by 0.3% and the Intel Core Ultra 9 285 (75488) by 0.4%.
Q: What is the GPU's performance percentile relative to all GPUs?
A: The NVIDIA GeForce RTX 5090 D sits in the 92nd percentile among all GPUs, with an average benchmark score of 77712. Its nearest rival, the AMD Radeon RX 6850M XT, scores 78940, which is 1.6% higher.
Q: Is there any resolution where the frame rate drops below 100 FPS on average?
A: Yes, only one instance: 3840x2160 with Ultra settings produces an average of 90 FPS. All other resolution and settings combinations exceed 100 FPS, with the next lowest being 144 FPS at 4K High and 144 FPS at 1440p Ultra.
Q: How many total hardware combinations were tested for this game?
A: This combo ranks 2nd out of 3716 tested combinations for Downfall. The data confirms the system is measured rather than estimated, with the playable threshold set at 60 FPS.
CPU and GPU Roles
The benchmark data reveals an interesting dynamic between CPU and GPU responsibilities in Downfall. At 1920x1080 with Low settings, the system hits 482 FPS, which is an extremely high workload for the CPU to feed. The fact that this drops to 345 FPS at 2560x1440 and then to 214 FPS at 3840x2160 at the same Low settings indicates that as resolution increases, the GPU becomes more of a limiting factor, even with a flagship card like the RTX 5090 D.
The scaling pattern between presets at each resolution shows where the GPU saturates. At 1080p, moving from Low to Medium reduces average FPS from 482 to 395, a drop of 87 FPS. High settings further reduce it to 324 FPS, and Ultra brings it down to 202 FPS. At 1440p, the same preset progression yields 345, 282, 231, and 144 FPS respectively. At 4K, the numbers are 214, 175, 144, and 90 FPS. The consistent halving of performance from Low to Ultra at each resolution suggests the GPU is handling most of the rendering load, while the CPU maintains sufficient headroom even at the highest frame rates.
The CPU's 16-core, 32-thread configuration with a 128 MB L3 cache likely prevents any frame pacing issues at 1080p Low, where the frame rate approaches 500 FPS. The GPU's 32 GB of GDDR7 memory with 1.79 TB/s bandwidth becomes more relevant at 4K Ultra, where the 90 FPS average still represents a demanding workload. The data suggests that at lower resolutions, the CPU's single-thread performance (3dmark single thread score of 1292) and multi-thread capability (cinebench r23 multicore score of 42018) are sufficient to keep up with the GPU's output, while at 4K, the GPU's raw compute (104.8 TFLOPS FP32) becomes the primary determinant of final frame rates.
Similar Performance Alternatives
For the CPU, the nearest rivals all fall within a 0.4% delta of the Ryzen 9 9950X3D's average score of 75779. The AMD Ryzen 7 PRO 9755 matches at 75738 with a 0.1% delta, while the AMD Ryzen 7 PRO 9755X3D scores 75716, also a 0.1% difference. The AMD EPYC 8224P trails by 0.3% with 75582, and the Intel Core Ultra 9 285 is 0.4% behind at 75488. These four processors would deliver nearly identical performance in Downfall, meaning any of them paired with the RTX 5090 D would produce frame rates within a negligible margin of the measured results.
The GPU side shows a more unusual set of rivals. The AMD Radeon RX 6650M XT has an average score of 76904, which is 1.1% lower than the RTX 5090 D's 77712. More surprisingly, the AMD Radeon RX 6850M XT scores 78940, which is 1.6% higher, and the NVIDIA Tesla P100 PCIe 12 GB (79396) and 16 GB (79605) variants are 2.1% and 2.4% higher respectively. These are all mobile or datacenter-oriented parts rather than desktop gaming GPUs, so the comparison is unusual. In practical terms, the RTX 5090 D's performance in Downfall would likely be bracketed by these alternatives, but the deltaPct values indicate the differences are small enough that real-world gaming results would be similar.
The Verdict
This PC can run Downfall exceptionally well at every resolution and preset combination tested. The verdict data confirms that all four settings presets (Low, Medium, High, Ultra) are playable at 1920x1080, 2560x1440, and 3840x2160, meaning every configuration clears the 60 FPS threshold. At 1080p, the best playable setting is Ultra with an average of 202 FPS. At 1440p, Ultra delivers 144 FPS, and at 4K, Ultra still maintains 90 FPS. The lowest measured average across all twelve combinations is 90 FPS at 4K Ultra, which is 30 FPS above the playable threshold.
The system's rank of 2nd out of 3716 combinations reinforces that this is one of the most capable setups available for this game. Even the most demanding scenario, 4K Ultra, leaves substantial headroom above the 60 FPS target. Users seeking maximum visual fidelity can enable Ultra at any resolution without concern for dropping below playable frame rates.
Measured FPS Breakdown
At 1920x1080, the system produces 482 FPS on Low, 395 FPS on Medium (with min/max of 335/454), 324 FPS on High, and 202 FPS on Ultra. The Medium preset is the only one at this resolution with recorded minimum and maximum values, showing a range from 335 to 454 FPS.
Moving to 2560x1440, the frame rates remain very high: 345 FPS on Low, 282 FPS on Medium (min/max of 240/324), 231 FPS on High, and 144 FPS on Ultra. The Medium preset again shows the full range, with the minimum staying well above the 60 FPS threshold.
At 3840x2160, the system delivers 214 FPS on Low, 175 FPS on Medium (min/max of 149/202), 144 FPS on High, and 90 FPS on Ultra. The 4K Medium minimum of 149 FPS is still more than double the playable threshold, and even the Ultra preset's average of 90 FPS provides comfortable headroom. The progression from Low to Ultra at each resolution shows a consistent pattern of roughly halving the frame rate, indicating predictable scaling behavior.
How This Combo Ranks
This combination of the AMD Ryzen 9 9950X3D and NVIDIA GeForce RTX 5090 D ranks 2nd out of 3716 tested combinations for Downfall. This places it in the top 0.05% of all tested hardware configurations, meaning only one other combination produces higher frame rates in this game. The CPU's 95th percentile ranking among all CPUs and the GPU's 92nd percentile ranking among all GPUs combine to create a system that is near the absolute peak of what is available.
The rank suggests that the RTX 5090 D, despite being a slightly modified version of the flagship GPU, is extremely well-suited to Downfall's rendering requirements. The CPU's high multi-threaded performance (cinebench r23 multicore score of 42018) and the GPU's massive memory bandwidth (1.79 TB/s) likely contribute to this top-tier result. The gap between this combo and the top-ranked combination is not specified, but the data indicates that for practical purposes, this system delivers about the highest performance a user can expect.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which achieves an average of 202 FPS. This provides more than triple the playable threshold, so users can enable maximum settings without any performance concerns.
At 2560x1440, Ultra is again the best choice, with an average of 144 FPS. This is 84 FPS above the 60 FPS threshold, offering smooth gameplay with all visual features enabled.
At 3840x2160, Ultra remains viable with an average of 90 FPS. While this is the lowest average across all tested combinations, it still exceeds the 60 FPS playable threshold by 50%. Users who prioritize frame rate over visual quality could choose the High preset at 144 FPS, but the data confirms that 4K Ultra is fully playable. The recommendation is to use Ultra at all three resolutions, as the system has sufficient performance headroom in every scenario.