Downfall

Downfall, a horror title released in early 2016, presents a light load for a modern flagship pairing like the AMD Ryzen 9 9950X3D and the NVIDIA GeForce RTX 5080. The benchmark data measured for this exact combination shows the game clearing the playable threshold of 60 FPS at every tested resolution and every preset, including Ultra at 4K. The analysis below walks through the numbers resolution by resolution, examines where the bottleneck shifts between CPU and GPU, and places this pairing's rank among all tested combinations for this game.

Measured FPS Breakdown

The measured dataset covers three resolutions — 1920x1080, 2560x1440, and 3840x2160 — each tested at four presets: Low, Medium, High, and Ultra. Only average frame rates were recorded for this entry; minimum and maximum frame-rate data was not captured.

At 1920x1080, the pairing delivers 421.3 FPS at Low, 348.2 FPS at Medium, 281.5 FPS at High, and 178 FPS at Ultra. The spread between Low and Ultra at this resolution is 243.3 FPS, which is the largest absolute gap in the dataset and reflects how much rendering headroom exists when the RTX 5080 is not being pushed by pixel count.

At 2560x1440, the averages settle to 302.5 FPS at Low, 249.8 FPS at Medium, 204.8 FPS at High, and 129.3 FPS at Ultra. Each step up the preset ladder costs roughly 50 to 80 FPS at this resolution, and even the most demanding preset sits at more than double the 60 FPS playable threshold.

At 3840x2160, the frame rates are 186.5 FPS at Low, 154.6 FPS at Medium, 124.4 FPS at High, and 78.3 FPS at Ultra. Ultra at 4K remains the single most demanding configuration in the dataset, yet it still clears the playable threshold with a margin of 18.3 FPS. The High preset at 4K delivers more than double the threshold, which indicates the GPU retains substantial headroom even at native 4K.

Across all twelve measured configurations, the lowest recorded average is 78.3 FPS. No tested combination of resolution and preset drops below the playable threshold.

CPU and GPU Roles

The scaling pattern between resolutions indicates where the limiting component sits for Downfall.

From 1920x1080 to 2560x1440 at Ultra, average frame rate falls from 178 FPS to 129.3 FPS — a reduction of 48.7 FPS for a substantial increase in pixel count. From 2560x1440 to 3840x2160 at Ultra, it falls again from 129.3 FPS to 78.3 FPS, a further drop of 51 FPS. This consistent decline across resolutions shows the game is GPU-limited at the Ultra preset: the frame rate tracks the GPU's rendering load rather than plateauing at a CPU-determined ceiling.

The same pattern holds at High, where averages go 281.5 FPS, 204.8 FPS, and 124.4 FPS across the three resolutions. However, the flattening at the top of the chart is worth noting: at Low, going from 1080p to 1440p costs 118.8 FPS (421.3 to 302.5), while going from 1440p to 4K costs 116 FPS (302.5 to 186.5). Frame rates approaching and exceeding 400 FPS at 1080p Low are in territory where the Ryzen 9 9950X3D's single-thread performance becomes a factor, and the CPU's benchmark data — a single-thread 3DMark score of 1292, Cinebench R23 single-core score of 2259, and Geekbench single-core score of 3064 — places it in the 95th percentile of all CPUs, meaning processor-side limits are unlikely to bind before the GPU does in this title.

In short, at 1080p with lighter presets the CPU increasingly shapes the ceiling, while at 1440p and 4K, and at every Ultra setting, the RTX 5080 is the component doing the deciding. Downfall, as an older horror game, simply does not present a workload that stresses either component — a point reinforced by the ranking data later in this analysis.

Best Settings per Resolution

Using the 60 FPS playable threshold, the most demanding preset that stays at or above the threshold is Ultra at every resolution — there is no need to step down.

• 1920x1080 — Ultra: 178 FPS average. Clears the threshold by 118 FPS.
• 2560x1440 — Ultra: 129.3 FPS average. Clears the threshold by 69.3 FPS.
• 3840x2160 — Ultra: 78.3 FPS average. Clears the threshold by 18.3 FPS, the tightest margin in the dataset but still comfortably playable.

The verdict data confirms this directly: all four presets are listed as playable at all three resolutions, and Ultra is flagged as the best setting at each.

FAQ

Q: Can the Ryzen 9 9950X3D and RTX 5080 run Downfall at 4K?

A: Yes. At 3840x2160 the pairing averages 78.3 FPS on Ultra, 124.4 FPS on High, 154.6 FPS on Medium, and 186.5 FPS on Low. Every preset clears the 60 FPS playable threshold at native 4K.

Q: What is the frame rate at 1080p on Low settings?

A: 421.3 FPS average, the highest figure in the entire measured dataset for this game and hardware combination.

Q: Which preset should be used at 1440p?

A: Ultra, delivering 129.3 FPS average — more than double the 60 FPS playable threshold. There is no measured reason to lower settings at this resolution.

Q: How much does Ultra cost in frame rate compared to Low at 4K?

A: Going from Low to Ultra at 3840x2160 reduces the average from 186.5 FPS to 78.3 FPS, a drop of 108.2 FPS.

Q: Were minimum and maximum frame rates recorded?

A: No. Only average frame rates were captured for this entry; minimum and maximum values are not available in the dataset.

Q: Is the game CPU-limited or GPU-limited on this hardware?

A: At 1440p, 4K, and at the Ultra preset generally, the data indicates GPU-limited behavior — frame rates decline consistently as resolution rises. At 1080p with lighter presets, where averages exceed 400 FPS, CPU-side limits from the Ryzen 9 9950X3D increasingly shape the ceiling.

Similar Performance Alternatives

For the CPU side, the Ryzen 9 9950X3D's average benchmark score of 75779 sits within a tenth of a percent of its nearest rivals: the AMD Ryzen 7 PRO 9755 (75738, 0.1% delta) and AMD Ryzen 7 PRO 9755X3D (75716, 0.1% delta). The AMD EPYC 8224P (75582, 0.3% delta) and Intel Core Ultra 9 285 (75488, 0.4% delta) are also effectively equivalent in aggregate performance. Any of these processors would behave similarly in Downfall, given that the game's frame rates on this pairing are GPU-bound at the settings that matter.

For the GPU side, the RTX 5080's average score of 56083 places it near the AMD Radeon 8060S (55757, 0.6% delta), AMD Radeon RX 6750 GRE 12 GB (55698, 0.7% delta), and AMD Radeon Pro W5700X (54828, 2.3% delta), while the AMD Radeon RX 9070 GRE (57367) scores 2.2% higher. GPUs in this cluster would be expected to produce broadly similar frame rates in Downfall, though the exact margins at each preset would vary and are not measured here.

The RTX 5080 itself ranks in the 87th percentile of all GPUs, and the Ryzen 9 9950X3D in the 95th percentile of all CPUs — both well above the level this game requires.

The Verdict

Yes — decisively. The Ryzen 9 9950X3D plus RTX 5080 combination runs Downfall above 60 FPS at every tested resolution and every preset. Ultra is playable at all three resolutions: 178 FPS at 1920x1080, 129.3 FPS at 2560x1440, and 78.3 FPS at 3840x2160. The verdict-by-resolution data lists all four presets — Low, Medium, High, and Ultra — as playable at all three resolutions, with Ultra flagged as the best setting in each case. The only configuration that approaches the threshold at all is 4K Ultra, and even there the margin is 18.3 FPS above the playable line. Players should simply max out the game.

How This Combo Ranks

Against the broader field, this pairing ranks 173rd out of 3716 tested combinations for Downfall, placing it in roughly the top 5% of hardware configurations benchmarked for this game. That ranking aligns with the component-level percentiles — a 95th-percentile CPU paired with an 87th-percentile GPU — and confirms that the 9950X3D/RTX 5080 is far more hardware than a 2016 horror title demands. The data shows a combination with abundant headroom at every setting, and a rank that reflects it.