Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 45 | 72 | 88 | 107 |
| 1440p QHD | 72 | 116 | 141 | 173 |
| 1080p Full HD | 101 | 162 | 198 | 242 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The AMD Ryzen 9 9900X3D paired with the NVIDIA GeForce RTX 5060 delivers a remarkably consistent experience in Downfall, with the data showing that the combination scales cleanly from 1080p to 4K. The RTX 5060, a 5 nm Blackwell part with 8 GB of GDDR7 memory on a 128-bit bus, provides 19.18 TFLOPS of FP32 compute, while the 12-core Zen 5 CPU offers 128 MB of L3 cache and a 5.50 GHz boost clock. The measured results indicate that this is a system capable of high refresh rates at mainstream resolutions, with 4K Ultra being the only setting that falls short of the 60 FPS playable threshold.
Measured FPS Breakdown
At 1920x1080, the combo is decisively GPU-bound in the upper presets, delivering exceptional frame rates across the board. The Low preset averages 242 FPS, which is the highest figure recorded in the entire dataset. Moving to Medium, the average drops to 198 FPS, with a minimum of 168 FPS and a maximum of 227 FPS, showing tight frame pacing. The High preset averages 162 FPS, while Ultra still maintains a very strong 101 FPS average. All four settings at 1080p clear the 60 FPS threshold with massive headroom, indicating that this resolution is well within the comfort zone of the RTX 5060 for this horror title.
Stepping up to 2560x1440, the performance remains excellent, though the scaling between presets becomes more pronounced. The Low preset delivers a 173 FPS average, which is a 69 FPS drop from the 1080p Low result, representing a roughly 29% reduction in frame rate due to the increased pixel count. Medium averages 141 FPS (minimum 120, maximum 162), while High settles at 116 FPS. The Ultra preset at 1440p averages 72 FPS, which is exactly at the same level as the 4K High preset, suggesting that the GPU’s workload at these two configurations is similar. Every preset at this resolution stays above 60 FPS, making 1440p a fully playable resolution for this combination.
At 3840x2160, the picture begins to show the limits of the RTX 5060’s 8 GB memory buffer and 128-bit interface. The Low preset averages 107 FPS, which is still very playable, and Medium averages 88 FPS with a minimum of 75 FPS and a maximum of 101 FPS. The High preset averages 72 FPS, remaining above the playable threshold. However, the Ultra preset falls to an average of 45 FPS, which is a 27 FPS drop from High and represents a 37.5% performance loss. This is the only configuration in the entire dataset that fails to hit 60 FPS, indicating that 4K Ultra is simply too demanding for this GPU in Downfall.
CPU and GPU Roles
The data reveals a clear division of labor between the Ryzen 9 9900X3D and the RTX 5060, with the CPU’s influence being most apparent at lower resolutions and lower presets. At 1080p Low, the system produces 242 FPS, a figure that requires substantial CPU throughput to feed the GPU. The Ryzen 9’s strong single-thread performance, evidenced by its Geekbench single-core score of 3041 and Cinebench R23 single-core score of 6739, helps ensure that the CPU does not bottleneck the GPU at these high frame rates.
As resolution increases, the GPU becomes the dominant factor. The scaling from 1080p Low to 1440p Low shows a 69 FPS drop (from 242 to 173), while the scaling from 1440p Low to 4K Low shows a 66 FPS drop (from 173 to 107). This consistent pattern across resolutions indicates that the RTX 5060’s rendering throughput is the primary constraint, with the CPU having ample headroom. At 4K Ultra, the average falls to 45 FPS, a steep decline that suggests the GPU is hitting a hard limit, likely related to memory bandwidth (448.0 GB/s) and the 8 GB frame buffer.
The CPU’s role is further contextualized by its benchmark scores. The Ryzen 9 9900X3D sits in the 91st percentile of all CPUs, with an average benchmark score of 54762. Its nearest rival, the Intel Core Ultra 5 245KF, scores 55093, a delta of -0.6%, meaning the AMD chip is essentially tied with that Intel part. This level of performance is more than sufficient for Downfall, a 2016 horror title that is not known for extreme CPU demands. The GPU, on the other hand, sits in the 72nd percentile of all GPUs, with its nearest rival being the AMD Radeon 860M (delta -0.3%) and the AMD Radeon RX 6750 XT (delta 1.2%). This mid-range positioning explains why 4K Ultra is the only configuration that struggles.
FAQ
*Q: Can this system run Downfall at 4K with High settings?*
A: Yes. The measured data shows an average of 72 FPS at 3840x2160 with High settings, which clears the 60 FPS playable threshold.
Q: What is the best preset to use at 1440p to stay above 60 FPS?
A: The Ultra preset at 2560x1440 averages 72 FPS, making it the most demanding preset that remains playable at that resolution.
Q: How does the RTX 5060 compare to its closest rivals in synthetic benchmarks?
A: The RTX 5060’s average benchmark score of 26331 is 0.3% lower than the AMD Radeon 860M (26401) and 0.8% lower than the AMD Radeon RX 5700 XT 50th Anniversary (26553). It is 1.2% higher than the AMD Radeon RX 6750 XT (26011).
Q: Does the Ryzen 9 9900X3D bottleneck the RTX 5060 at 1080p?
A: No. The CPU’s single-thread performance (Geekbench single-core 3041, Cinebench R23 single-core 6739) is sufficient to support 242 FPS at 1080p Low, indicating no significant bottleneck.
Q: Is 4K Ultra playable with this hardware?
A: No. The measured average at 3840x2160 Ultra is 45 FPS, which is 15 FPS below the 60 FPS playable threshold.
Q: What is the frame time consistency like at Medium settings?
A: At 1080p Medium, the minimum is 168 FPS and the maximum is 227 FPS. At 1440p Medium, the range is 120 to 162 FPS. At 4K Medium, the range is 75 to 101 FPS. The spread widens as resolution increases, but remains acceptable.
How This Combo Ranks
In the global database of tested combinations for Downfall, this pairing of the AMD Ryzen 9 9900X3D and NVIDIA GeForce RTX 5060 ranks 1642 out of 3716 tested combos. This places it in the 44th percentile overall, which is a solid mid-pack result. Given that the game is a 2016 horror title with modest requirements, this ranking reflects the fact that many higher-end GPUs will outperform the RTX 5060, but the combination still delivers playable performance at all settings except 4K Ultra.
The CPU’s contribution to this ranking is noteworthy. The Ryzen 9 9900X3D is a top-tier processor, sitting in the 91st percentile of all CPUs, and its performance is effectively identical to the Intel Core Ultra 5 245KF, which scores 55093 (a 0.6% delta). The GPU, however, is the limiting factor in this pairing. The RTX 5060’s 72nd percentile ranking among all GPUs, coupled with its 8 GB memory capacity, means that it is the component that determines the ceiling for this combo. The fact that the combo ranks 1642nd out of 3716 suggests that while the CPU is overqualified for this game, the GPU is adequate for most scenarios, but not for maximum 4K fidelity.
The Verdict
Yes, this PC can run Downfall effectively, but with a clear caveat at 4K Ultra. The verdict data shows that at 3840x2160, the playable settings are High, Low, and Medium, with High being the best playable setting at 72 FPS average. At 2560x1440, all four settings—Low, Medium, High, and Ultra—are playable, with Ultra averaging 72 FPS. At 1920x1080, all four settings are playable, with Ultra averaging 101 FPS. The only configuration that fails to reach 60 FPS is 4K Ultra, which averages 45 FPS. For a horror game, where atmosphere and smooth motion are critical, this system is highly capable at 1080p and 1440p, and even at 4K it offers playable frame rates as long as you avoid the Ultra preset.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which delivers an average of 101 FPS. This gives the player maximum visual fidelity while retaining a frame rate nearly double the playable threshold.
At 2560x1440, the most demanding preset that stays at or above 60 FPS is also Ultra, averaging 72 FPS. This is a comfortable margin above 60 FPS, allowing for some headroom in demanding scenes.
At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average of 72 FPS. While Ultra is not playable at this resolution, High provides a solid experience that keeps the game fluid. The data shows that Medium at 4K averages 88 FPS, but High offers better visuals while still maintaining the 60 FPS target.