Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 39 | 63 | 76 | 93 |
| 1440p QHD | 63 | 101 | 123 | 150 |
| 1080p Full HD | 88 | 141 | 172 | 210 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The AMD Ryzen 9 7900X and AMD Radeon RX 9060 combination delivers consistent frame rates in Downfall, a 2016 horror title that rewards both CPU headroom and GPU throughput. The Ryzen 9 7900X sits in the 91st percentile of all CPUs, with an average benchmark score of 53288, placing it within 0.6% of the Intel Core i7-14700F and 0.2% of the AMD EPYC 7313P. The Radeon RX 9060, meanwhile, ranks in the 59th percentile of all GPUs with an average score of 16014, landing within 1% of the AMD Radeon RX 7700 and 0.7% of the NVIDIA GeForce RTX 3060 Ti. This pairing is not a lopsided bottleneck; rather, the data suggests a balanced platform where the CPU’s multi-threaded strength and the GPU’s mid-range raster performance complement each other across the tested resolutions.
Similar Performance Alternatives
The nearest CPU rivals to the Ryzen 9 7900X are instructive for builders who might swap in a different processor without changing the GPU. The AMD EPYC 7313P scores 53206, a delta of 0.2% below the 7900X’s 53288 average, meaning in CPU-bound scenarios the difference would be nearly imperceptible. The Intel Xeon Phi 7290 scores 53469, 0.3% higher, and the Intel Xeon 634 scores 52974, 0.6% lower. The Intel Core i7-14700F is the closest consumer alternative, scoring 53620, which is 0.6% above the 7900X. In practical terms for Downfall, any of these CPUs would deliver nearly identical frame pacing if the GPU remains the same, because the game’s horror scenes rarely push a 12-core, 24-thread processor to its limits. The 7900X’s multi-thread benchmark scores—29300 in Cinebench R23 multi-core, 51406 in PassMark multithread—are far above what a 2016 title requires, so the CPU is unlikely to be the limiting factor.
On the GPU side, the Radeon RX 9060’s nearest rivals show a tight cluster. The NVIDIA GeForce RTX 3060 Ti scores 16129, just 0.7% above the RX 9060’s 16014. The AMD Radeon R9 370X scores 15862, 1% lower, and the AMD Radeon RX 7700 scores 15852, also 1% lower. The AMD Radeon Pro W5500 trails by 2.1% at 15679. For a builder considering alternatives, the RX 9060 and RTX 3060 Ti would produce nearly identical frame rates in Downfall, with the RX 9060’s 8 GB GDDR6 memory and 288.0 GB/s bandwidth being adequate for the game’s textures. The R9 370X, despite its older architecture, is within 1% in synthetic scores, but the RX 9060’s RDNA 4.0 features—including DirectX 12 Ultimate support and 28 ray tracing cores—make it a more modern choice, even if Downfall itself does not use ray tracing. The RX 7700 matching within 1% also means that swapping between these cards would not change the verdict at any resolution.
CPU and GPU Roles
The measured FPS data reveals how the division of labor shifts across resolutions and presets. At 1920x1080, the CPU’s role is more prominent relative to higher resolutions, but the GPU still carries most of the load. The frame rate drops from 210 FPS at Low settings to 88 FPS at Ultra, a 58% reduction that is almost entirely GPU-driven. The Ryzen 9 7900X’s single-thread score of 4238 in PassMark and 1093 in 3DMark single-thread ensures that even at 1080p Low, where the GPU has less work per frame, the CPU can feed frames without stalling. The 7900X’s 3DMark 16-thread score of 10972 and 4-thread score of 4151 indicate strong scaling, but Downfall’s engine likely uses fewer than eight threads, so the 8-thread score of 7798 is more relevant. None of these scores approach a bottleneck at 1080p.
At 2560x1440, the GPU begins to dominate. The average FPS at Low is 150, dropping to 101 at High and 63 at Ultra. The scaling from Low to Ultra is a 58% reduction, similar to 1080p, but the absolute numbers are lower because the GPU is rendering more pixels. The CPU’s role becomes less critical here; even a weaker processor would likely produce similar results, because the RX 9060 is the limiting factor. The 7900X’s memory bandwidth of 83.2 GB/s and dual-channel DDR5 support are sufficient to keep the GPU fed, but the data does not show any CPU-related frame dips at this resolution.
At 3840x2160, the GPU is unequivocally the bottleneck. The average FPS at Low is 93, at Medium 76, at High 63, and at Ultra 39. The drop from High to Ultra is 38%—from 63 to 39 FPS—which is a massive penalty for the highest preset. The CPU’s 12 cores and 24 threads are idle for much of this workload; the game’s draw calls and physics are trivial for a Zen 4 processor. The 7900X’s Cinebench R23 multi-core score of 29300 and Geekbench multi-core of 19267 are far beyond what Downfall needs, so the frame rates at 4K are purely a function of the RX 9060’s rasterization performance. The GPU’s 21.43 TFLOPS FP32 and 191.4 GPixel/s pixel rate are the parameters that matter, and they are insufficient for Ultra at 4K.
The presets also reveal a consistent pattern: Medium settings provide the only preset with min/max data in the measured FPS. At 1080p Medium, the average is 172 FPS with a minimum of 146 and maximum of 198. At 1440p Medium, the average is 123 FPS with a minimum of 104 and maximum of 141. At 4K Medium, the average is 76 FPS with a minimum of 65 and maximum of 88. These min/max ranges show that the game maintains frame pacing without severe hitches, which is important for a horror title where sudden stutters can break immersion. The absence of min/max data for Low, High, and Ultra suggests that those presets were either tested with different methodology or the variations were not recorded, but the averages are consistent with the GPU being the primary constraint.
Measured FPS Breakdown
Starting at 1920x1080, the RX 9060 and Ryzen 9 7900X combination produces an average of 210 FPS at Low settings. This is far above any playability threshold and indicates that the CPU and GPU are both underutilized. At Medium, the average drops to 172 FPS, with a minimum of 146 and maximum of 198, showing a 38 FPS penalty from Low. High settings yield 141 FPS, a further 31 FPS drop, and Ultra reduces the average to 88 FPS. The step from High to Ultra is a 53 FPS reduction, which is the largest single-preset jump at 1080p. This suggests that Ultra enables effects that are disproportionately expensive on the RX 9060’s 1792 shading units.
At 2560x1440, the numbers scale down predictably. Low settings average 150 FPS, which is still well above 60 FPS. Medium averages 123 FPS, with a minimum of 104 and maximum of 141, representing a 27 FPS drop from Low. High averages 101 FPS, a 22 FPS drop from Medium. Ultra averages 63 FPS, which is a 38 FPS drop from High and lands just barely above the 60 FPS playability threshold. The min/max data for Medium at 1440p—104 to 141 FPS—shows that even in demanding scenes, the frame rate never dips below 104 FPS, which is reassuring for consistent gameplay.
At 3840x2160, the performance collapses. Low settings average 93 FPS, which is still playable but a 57 FPS drop from 1080p Low. Medium averages 76 FPS, with a minimum of 65 and maximum of 88, so even the minimum stays above 60 FPS. High averages 63 FPS, exactly at the playability threshold. Ultra averages 39 FPS, which is far below 60 FPS and likely results in a choppy experience. The gap between High and Ultra at 4K is 24 FPS, from 63 to 39, which is a 38% reduction. This is the only resolution where High settings are the best playable option, and the only resolution where Ultra is not viable.
Comparing across resolutions, the scaling from 1080p to 1440p at the same preset is roughly 30-40% lower FPS, and from 1440p to 4K is another 40-50% lower. For example, High settings go from 141 FPS at 1080p to 101 FPS at 1440p (28% drop) to 63 FPS at 4K (38% drop from 1440p). This consistent degradation confirms that the RX 9060’s 8 GB memory buffer and 128-bit bus width are the limiting factors at higher resolutions, not the CPU.
The Verdict
The data shows that this PC can run Downfall at playable frame rates across most configurations. At 1920x1080, all four presets—Low, Medium, High, and Ultra—average above 60 FPS, with Ultra at 88 FPS. This means a 1080p display with Ultra settings is fully playable, and the 60 FPS threshold is never threatened. At 2560x1440, the same is true: Low averages 150 FPS, Medium 123 FPS, High 101 FPS, and Ultra 63 FPS. The Ultra average of 63 FPS is only 3 FPS above the playability threshold, but it passes the bar. At 3840x2160, the verdict is mixed. Low averages 93 FPS, Medium averages 76 FPS with a minimum of 65, and High averages 63 FPS. These three presets all clear 60 FPS. Ultra averages 39 FPS, which is not playable by the 60 FPS standard.
The verdict by resolution is clear: at 1080p and 1440p, the entire preset range is playable, including Ultra. At 4K, the playable settings are Low, Medium, and High, with High being the best preset that stays at or above 60 FPS. The 4K Ultra preset is the only configuration in the entire dataset that fails the playability test. For a horror game that relies on atmosphere and pacing, the difference between 63 FPS at High and 39 FPS at Ultra is significant; the latter will feel sluggish during fast movements or scripted events. The data does not include min/max values for 4K High or 4K Ultra, but the averages suggest that High is the safe choice for 4K.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 88 FPS. There is no reason to lower settings at this resolution, as even the heaviest preset provides a comfortable margin above the threshold. The 88 FPS average also leaves headroom for scene complexity, though min/max data for Ultra is not available.
At 2560x1440, the best settings are also Ultra, with an average of 63 FPS. This is exactly at the playability threshold with a 3 FPS margin. While this is technically playable, the lack of min/max data for Ultra means there could be dips below 60 FPS in certain scenes. The Medium preset at 1440p, with an average of 123 FPS and a minimum of 104, offers a much larger safety margin. However, the verdict data lists Ultra as the best settings, so it is the recommended choice if the user prioritizes visual quality over absolute frame stability.
At 3840x2160, the best settings are High, with an average of 63 FPS. This is the same average as 1440p Ultra, but at a higher resolution. The Medium preset at 4K averages 76 FPS with a minimum of 65, which provides more headroom, but High is the most demanding preset that clears 60 FPS. Ultra at 4K averages 39 FPS, which is not playable. The recommendation for 4K is therefore High settings, which balances visual fidelity with playability.
How This Combo Ranks
The Ryzen 9 7900X and Radeon RX 9060 combination ranks 2185 out of 3716 tested combos in Downfall. This places it in the 58.8th percentile of all combinations, meaning roughly 59% of tested systems perform better in this game. This rank is not surprising given that the RX 9060’s GPU percentile is 59th, and the CPU’s percentile is 91st. The GPU drags the overall ranking down because Downfall’s frame rates are primarily GPU-limited at higher resolutions. The CPU’s high percentile does not compensate for the GPU’s mid-range standing in this particular title.
Relative to the nearest rival combos, the RX 9060’s close match to the RTX 3060 Ti and RX 7700 means that swapping the GPU to either of those would produce a similar rank. The CPU’s rivals—the EPYC 7313P, Xeon Phi 7290, Xeon 634, and Core i7-14700F—would not change the ranking meaningfully, because the CPU is not the bottleneck in Downfall. The rank of 2185 out of 3716 is a reflection of the GPU’s performance tier, not the CPU’s. Builders who want a higher rank would need a faster GPU, not a faster processor. The 7900X’s 91st percentile CPU standing is irrelevant to this game’s performance, as evidenced by the fact that the combo’s rank is nearly identical to what the RX 9060’s 59th percentile would suggest on its own.