Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 62 | 99 | 121 | 148 |
| 1440p QHD | 100 | 160 | 195 | 238 |
| 1080p Full HD | 140 | 224 | 273 | 334 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The AMD Ryzen 7 9850X3D paired with the NVIDIA GeForce RTX 5070 delivers a decisive performance profile for Downfall, a 2016 horror title that appears to be far less demanding than modern releases. The measured data shows this combo not only meets but vastly exceeds the 60 FPS playability threshold across every resolution and preset tested, from 1080p Low at 334 FPS to 4K Ultra at 62 FPS. This places the system in a position where the user will likely be limited by display refresh rates rather than hardware capability. The benchmark results indicate a consistent pattern of high average frame rates, with the only sub-100 FPS result occurring at the most demanding 4K Ultra setting. This analysis explores the implications of these scores, comparing the hardware against its nearest rivals and determining which component carries the workload at each resolution.
FAQ
Q: What is the highest preset that stays above 60 FPS at 4K resolution?
A: The Ultra preset at 3840x2160 maintains an average of 62 FPS, which is just above the 60 FPS playable threshold. The High preset at the same resolution averages 99 FPS, while Medium averages 121 FPS and Low reaches 148 FPS. All four presets at 4K are considered playable.
Q: How does the CPU's single-thread performance compare to its nearest rival?
A: The AMD Ryzen 7 9850X3D scores 2228 in Cinebench R23 single-core, and its average benchmark score of 58386 places it 0.5% ahead of the Intel Core i9-14900 (58115) and 0.1% ahead of the Intel Xeon Platinum 8260M (58323). It trails the AMD Ryzen AI 9 HX 470 by 0.7% and the Intel Xeon w5-2545 by 0.2%.
Q: What is the FPS difference between Low and Ultra settings at 1440p?
A: The data shows a substantial scaling range at 2560x1440. Low settings produce an average of 238 FPS, while Ultra drops to 100 FPS. The Medium preset averages 195 FPS, and High averages 160 FPS. This indicates a 138 FPS difference between the lowest and highest quality presets.
Q: Does the RTX 5070 outperform its closest rival in raw GPU compute?
A: The NVIDIA GeForce RTX 5070 has an average benchmark score of 40377, which is 0.1% higher than the AMD Radeon Pro 580 (40318) and 0.8% higher than the AMD Radeon Pro WX 7100 (40063). It also leads the NVIDIA RTX A500 Mobile by 2% but trails the AMD Radeon Pro 5300 by 1.2%.
Q: Which component demonstrates higher relative performance against their respective competitor sets?
A: The CPU sits in the 92nd percentile among all tested processors, while the GPU sits in the 82nd percentile among all tested graphics cards. The processor's average score of 58386 is more closely clustered with its rivals (all within 0.7%), whereas the GPU's score of 40377 shows slightly wider variance against its nearest competitors, ranging from -1.2% to +2%.
Q: Are all resolution and preset combinations in the measured data playable?
A: Yes, every combination exceeds the 60 FPS playability threshold. The lowest recorded average is 62 FPS at 4K Ultra. The highest is 334 FPS at 1080p Low. Even the minimum frame rates recorded for Medium settings remain well above 60 FPS: 103 FPS at 4K, 166 FPS at 1440p, and 232 FPS at 1080p.
Similar Performance Alternatives
The nearest rivals for the AMD Ryzen 7 9850X3D provide a clear picture of what other processors would deliver similar CPU-bound behavior in Downfall. The Intel Core i9-14900, with an average score of 58115, is just 0.5% slower overall. This would produce virtually identical frame rates in CPU-limited scenarios. The Intel Xeon Platinum 8260M (58323) is nearly indistinguishable at 0.1% delta, while the Intel Xeon w5-2545 (58504) is 0.2% faster. The AMD Ryzen AI 9 HX 470 (58826) leads this group by 0.7%. For gaming, the Core i9-14900 is the most relevant alternative due to its desktop orientation, while the Xeon parts target workstation workloads despite similar aggregate scores.
On the GPU side, the RTX 5070's nearest rivals are an eclectic mix. The AMD Radeon Pro 580 (40318) is essentially tied at 0.1% slower, making it a surprising but valid performance match for this game's GPU load. The AMD Radeon Pro WX 7100 (40063) trails by 0.8%, while the AMD Radeon Pro 5300 (40870) is 1.2% faster. The NVIDIA RTX A500 Mobile (39568) is 2% behind. None of these are consumer gaming cards, which suggests the RTX 5070's specific feature set and driver optimizations for DirectX 12 Ultimate may not be fully captured by these aggregate scores. In Downfall, the GPU-bound performance would likely be similar, but the RTX 5070's 12 GB of GDDR7 memory and 672.0 GB/s bandwidth provide a clear advantage in texture-heavy horror scenes.
CPU and GPU Roles
The scaling data from 1080p to 4K reveals a clear transition from CPU-bound to GPU-bound performance. At 1920x1080, the frame rates are extraordinarily high: Low averages 334 FPS, Medium 273 FPS, High 224 FPS, and Ultra 140 FPS. These numbers suggest the CPU is the primary limiter at this resolution, as even the most demanding preset exceeds what most displays can show. The Ryzen 7 9850X3D's 8 cores and 16 threads, with a boost clock of 5.60 GHz, are more than sufficient for Downfall's 2016 engine.
Moving to 2560x1440, frame rates drop by roughly 30-40% across presets: Low goes from 334 to 238 FPS, Medium from 273 to 195 FPS, High from 224 to 160 FPS, and Ultra from 140 to 100 FPS. This consistent proportional drop indicates the GPU is beginning to take on more responsibility, though the CPU still has headroom. The RTX 5070's 6144 shading units and 30.87 TFLOPS FP32 performance handle the increased pixel count efficiently.
At 3840x2160, the GPU becomes the dominant factor. Low drops to 148 FPS, Medium to 121 FPS, High to 99 FPS, and Ultra to 62 FPS. The Ultra preset's 62 FPS average is the only result close to the 60 FPS threshold, showing that 4K with maximum settings finally stresses the RTX 5070. The pattern across resolutions shows the CPU maintains a consistent ceiling of roughly 300+ FPS, while the GPU's workload scales with pixel count and preset complexity. For players targeting high refresh rates at 1080p or 1440p, the CPU matters little; for 4K Ultra, the GPU is the deciding factor.
How This Combo Ranks
The AMD Ryzen 7 9850X3D + NVIDIA GeForce RTX 5070 combination holds the 768th position out of 3716 tested combos in Downfall, placing it in the top 21% of all systems evaluated. This rank reflects the aggregate performance across all resolutions and presets. Given that the game is from 2016 and the hardware is from 2025-2026, the high ranking is expected, but the specific position suggests that many other modern or high-end combos achieve similar or better frame rates.
The rank of 768 out of 3716 means roughly 2948 other configurations outperform this combo in Downfall. This is not a criticism of the hardware but rather an indication that the game is highly playable on a wide range of systems. The CPU's 92nd percentile standing and the GPU's 82nd percentile standing both contribute positively, but the game's low requirements mean that even mid-range components from recent years can achieve high frame rates. The combo's placement in the top quarter of all tested systems is a strong result, especially considering the data includes many multi-GPU and high-end workstation configurations that may excel in this specific title.
The Verdict
This PC can absolutely run Downfall, and the data shows it does so with overwhelming margin. The verdict by resolution is unanimous: every resolution and every preset tested clears the 60 FPS playable threshold. At 1920x1080, the best playable setting is Ultra at 140 FPS average. At 2560x1440, Ultra runs at 100 FPS average. At 3840x2160, Ultra achieves 62 FPS average, which is just above the threshold but still playable. For users with standard 60 Hz displays, this combination provides a flawless experience at maximum settings in 4K. For those with 144 Hz or 240 Hz displays, the 1080p and 1440p results provide ample headroom to use high refresh rates. The only caution is 4K Ultra at 62 FPS, which could dip below 60 in intense scenes, though the recorded minimum of 103 FPS at 4K Medium suggests the engine handles stress well. The RTX 5070's 12 GB of VRAM is sufficient for this title's texture requirements, and the CPU's 96 MB of L3 cache provides excellent frame pacing.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 62 FPS. This is a tight margin, so users who prefer consistent frame rates might choose High at 99 FPS or Medium at 121 FPS. The data shows that Ultra at 4K is technically playable but leaves little headroom.
At 2560x1440, Ultra is again the best setting, averaging 100 FPS. This provides a comfortable cushion above the 60 FPS threshold, making it the recommended choice for most users. The jump from High (160 FPS) to Ultra (100 FPS) is significant, but the Ultra experience is still well within playable territory.
At 1920x1080, Ultra delivers 140 FPS average, which is the clear recommendation. The lower presets offer diminishing returns: Medium at 273 FPS and Low at 334 FPS are far beyond what most displays can show. Ultra at 140 FPS is the sweet spot for visual quality and smoothness.
Measured FPS Breakdown
The complete measured FPS data for this combo shows a consistent hierarchy across resolutions. At 3840x2160, Low averages 148 FPS, Medium averages 121 FPS with a minimum of 103 and maximum of 139, High averages 99 FPS, and Ultra averages 62 FPS. The Medium preset is the only one with full min/max data, showing a 36 FPS variance between the lowest and highest recorded frames.
At 2560x1440, Low averages 238 FPS, Medium averages 195 FPS with a minimum of 166 and maximum of 224, High averages 160 FPS, and Ultra averages 100 FPS. The Medium variance here is 58 FPS, indicating more fluctuation at higher frame rates. At 1920x1080, Low averages 334 FPS, Medium averages 273 FPS with a minimum of 232 and maximum of 314, High averages 224 FPS, and Ultra averages 140 FPS. The Medium variance of 82 FPS at 1080p shows the engine's frame time variability at very high frame rates, which is typically imperceptible to users on standard displays.
The pattern across all resolutions shows that the Low preset provides roughly double the frame rate of Ultra. This 2x scaling factor is consistent, suggesting the game's graphical settings have a linear impact on GPU load. The min/max data for Medium settings reveals that frame variance increases as resolution decreases, which is typical for CPU-bound scenarios at higher frame rates.