Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 45 | 72 | 88 | 107 |
| 1440p QHD | 72 | 116 | 141 | 173 |
| 1080p Full HD | 101 | 162 | 198 | 242 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The AMD Ryzen 7 9850X3D paired with the NVIDIA GeForce RTX 5060 delivers a strong performance profile for Downfall, a 2016 horror title. Measured frame rates show that this combination clears the 60 FPS playable threshold at every preset tested except 4K Ultra, where the average drops to 45 FPS. At 1080p and 1440p, even the most demanding Ultra preset stays comfortably above 60 FPS, while 4K requires dropping to High settings to maintain smooth gameplay. The data indicates a GPU-bound workload, with the RTX 5060 acting as the primary performance limiter, while the Ryzen 7 9850X3D’s high single-thread and multi-thread scores ensure it never becomes a bottleneck in this title.
Measured FPS Breakdown
The measured FPS data for Downfall spans three resolutions and four quality presets, with average frame rates recorded for all combinations and min/max values captured for Medium settings only. At 1920x1080, the lowest resolution tested, the combo produces extremely high frame rates across the board. Low settings average 242 FPS, Medium averages 198 FPS with a minimum of 168 and a maximum of 227, High averages 162 FPS, and Ultra still delivers 101 FPS. These numbers indicate that the system is far above the 60 FPS threshold at 1080p, with even the most demanding preset leaving headroom for refresh rates beyond 100 Hz.
Moving to 2560x1440, performance scales down predictably. Low settings average 173 FPS, Medium averages 141 FPS with a min/max of 120/162, High averages 116 FPS, and Ultra averages 72 FPS. The Ultra preset remains playable, but the margin over 60 FPS is slim—only 12 FPS. The min/max range for Medium shows a 42 FPS spread, indicating some frame time variance, but the average is well above the threshold.
At 3840x2160, the RTX 5060 begins to show its limits. Low settings average 107 FPS, Medium averages 88 FPS with a min/max of 75/101, High averages 72 FPS, and Ultra falls to 45 FPS. The Ultra preset is the only one that fails to reach 60 FPS, and the drop from High to Ultra is steep—27 FPS, a 37% reduction. The Medium preset’s minimum of 75 FPS suggests that even with occasional dips, it stays comfortably playable. Across all resolutions, the scaling from Low to Ultra is consistent: at 1080p, the drop is 141 FPS (242 to 101); at 1440p, it is 101 FPS (173 to 72); at 4K, it is 62 FPS (107 to 45). This pattern indicates that the GPU is the dominant factor in frame rate variation, as the relative impact of settings remains similar regardless of resolution.
Best Settings per Resolution
For each resolution, the most demanding preset that maintains an average of at least 60 FPS is as follows. At 3840x2160, the best playable setting is High, which averages 72 FPS. Ultra is not playable, as it drops to 45 FPS. At 2560x1440, the best playable setting is Ultra, which averages 72 FPS—exactly at the threshold but still above it. At 1920x1080, the best playable setting is also Ultra, averaging 101 FPS, providing a substantial margin. These results show that the RTX 5060 can handle the game’s maximum quality at 1440p and 1080p, but at 4K, users must settle for High settings to stay above 60 FPS. The difference between High and Ultra at 4K is significant, and the data suggests that the 8 GB GDDR7 memory and the GPU’s bandwidth are not sufficient for the highest preset at that resolution.
CPU and GPU Roles
The performance data clearly indicates that the GPU is the primary limiting factor in Downfall. As resolution increases from 1080p to 4K, frame rates drop by roughly the same proportion across all presets. For example, at High settings, the average FPS falls from 162 at 1080p to 116 at 1440p and then to 72 at 4K—a 28% drop from 1080p to 1440p and a 38% drop from 1440p to 4K. At Low settings, the drop is from 242 to 173 to 107, a 29% and 38% reduction respectively. This consistent scaling is a hallmark of GPU-bound rendering, where the number of pixels and the complexity of effects overwhelm the graphics card before the CPU becomes a factor.
The CPU, an AMD Ryzen 7 9850X3D, is a high-end 8-core, 16-thread processor based on Zen 5 architecture with a boost clock of 5.6 GHz. Its benchmark scores are impressive: it achieves a Cinebench R23 multi-core score of 22,807 and a single-core score of 2,228, placing it in the 92nd percentile of all CPUs. In contrast, the RTX 5060 sits in the 72nd percentile of GPUs, with a PassMark G3D score of 20,891. This disparity suggests that the CPU has far more headroom than the GPU in this combination. Even at 1080p, where CPU load typically increases, the frame rates exceed 240 FPS on Low settings, indicating that the Ryzen 7 9850X3D is not a bottleneck. The game, released in 2016, is unlikely to be heavily threaded, and the CPU’s strong single-thread performance (PassMark single-thread score of 4,704) ensures it can feed the GPU efficiently.
The scaling between presets further reinforces the GPU-bound conclusion. At each resolution, the percentage drop from Low to Ultra is nearly identical: 58% at 1080p (242 to 101), 58% at 1440p (173 to 72), and 58% at 4K (107 to 45). This uniformity means the GPU is the sole determinant of how settings affect frame rate. If the CPU were a significant factor, we would expect the gap to narrow at higher resolutions, as the GPU becomes more stressed. Instead, the consistent drop confirms that the RTX 5060’s compute and memory resources are the limiting factor, particularly at 4K where the Ultra preset exceeds its capabilities.
Similar Performance Alternatives
Based on the nearestRivals data, the Ryzen 7 9850X3D performs within a narrow band of several other high-end processors. Its average benchmark score of 58,386 is 0.1% above the Intel Xeon Platinum 8260M (58,323) and 0.2% below the Intel Xeon w5-2545 (58,504). It is also 0.5% above the Intel Core i9-14900 (58,115) and 0.7% below the AMD Ryzen AI 9 HX 470 (58,826). In practical terms, any of these CPUs would deliver nearly identical frame rates in Downfall, as the game is not CPU-sensitive. The Ryzen 7 9850X3D’s 92nd percentile ranking indicates it is among the fastest desktop processors available, but for this title, the differences between these rivals are negligible.
For the GPU, the RTX 5060’s average benchmark score of 26,331 places it within 1.2% of the AMD Radeon RX 6750 XT (26,011) and 0.8% of the AMD Radeon RX 5700 XT 50th Anniversary (26,553). It is also 0.3% below the AMD Radeon 860M (26,401) and 0.3% below the NVIDIA GeForce MX550 (26,421). While the MX550 and Radeon 860M are typically lower-end parts, the data shows that in terms of raw benchmark scores, they are statistically equivalent to the RTX 5060. In Downfall, users with any of these GPUs would see frame rates within a few FPS of each other. The RTX 5060’s 72nd percentile ranking reflects that it is a mid-range card, and its performance in this game is consistent with that positioning.
How This Combo Ranks
Among all tested CPU-GPU combinations for Downfall, this pairing ranks 1,642 out of 3,716, placing it in the 44th percentile (i.e., better than 56% of tested combos). This is a respectable but not top-tier position. The CPU alone sits in the 92nd percentile of all CPUs, while the GPU is in the 72nd percentile, so the combo’s overall rank is dragged down by the GPU. The data suggests that pairing the Ryzen 7 9850X3D with a more powerful GPU would significantly improve the combo’s standing, as the CPU has ample headroom. However, for Downfall specifically, the RTX 5060 is sufficient to achieve playable frame rates at most settings, and the combo’s rank reflects its ability to handle the game at high quality without exceeding the 60 FPS threshold except at 4K Ultra.
The Verdict
This PC can run Downfall effectively. According to the verdictByResolution data, at 3840x2160, the playable settings are High, Low, and Medium, with High being the best setting at an average of 72 FPS. Ultra is not playable, averaging 45 FPS. At 2560x1440, all four presets—Low, Medium, High, and Ultra—are playable, with Ultra achieving 72 FPS. At 1920x1080, all presets are also playable, with Ultra delivering 101 FPS. Therefore, the system clears the 60 FPS threshold at every resolution and preset combination except 4K Ultra. For users with a 4K display, the recommended setting is High, which provides a 72 FPS average and maintains a smooth experience. At 1440p and 1080p, the game can be run at maximum quality without sacrificing frame rate. The RTX 5060’s 8 GB of GDDR7 memory and 448 GB/s bandwidth are adequate for this 2016 title, though the Ultra preset at 4K exceeds its limits. Overall, the Ryzen 7 9850X3D + RTX 5060 combination is a capable system for Downfall, offering high frame rates at mainstream resolutions and only requiring a modest settings reduction at 4K.