Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 37 | 60 | 73 | 89 |
| 1440p QHD | 60 | 96 | 118 | 144 |
| 1080p Full HD | 84 | 135 | 165 | 201 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 5050 combination presents a curious pairing for running Downfall, a horror title from 2016. The CPU is a high-end desktop part with an average benchmark score of 58386, placing it in the 92nd percentile of all CPUs, while the GPU is a more modest performer, sitting in the 66th percentile of all GPUs with an average score of 21035. This creates a significant imbalance where the processor vastly outperforms the graphics card, making the RTX 5050 the primary bottleneck in most scenarios. The measured data confirms this dynamic, showing that the system can deliver playable frame rates at 4K, but with clear limitations at the highest settings.
Similar Performance Alternatives
For the CPU, the AMD Ryzen 7 9850X3D's nearest rivals are a mix of server and desktop processors. The Intel Xeon Platinum 8260M has an average score of 58323, which is 0.1% lower, making it effectively a performance equivalent. The Intel Xeon w5-2545 scores 58504, a 0.2% advantage over the Ryzen, while the Intel Core i9-14900 scores 58115, putting it 0.5% behind. The AMD Ryzen AI 9 HX 470 completes the group with a score of 58826, which is 0.7% higher. These deltas are all within a single percentage point, meaning that in synthetic benchmarks, swapping between these four CPUs would yield nearly identical results. For a game like Downfall, which is from 2016, the differences among these processors would likely be imperceptible, as the game's engine is unlikely to stress an 8-core, 16-thread Zen 5 part to its limits.
On the GPU side, the RTX 5050's nearest rivals are an eclectic group. The AMD Radeon RX Vega M GL scores 21153, which is 0.6% higher than the RTX 5050, while the AMD Radeon HD 8970M scores 21237, a 1% advantage. The AMD Radeon RX 5600 XT is the closest competitor in terms of market position, scoring 20713, which is 1.6% lower than the RTX 5050. The NVIDIA RTX A4000 Mobile scores 21379, putting it 1.6% ahead. This indicates that the RTX 5050's raw compute performance sits in a crowded field, and users could expect similar frame rates from any of these GPUs. The data suggests that the RTX 5050 is not a performance outlier; it is firmly in the mid-range tier, and its behavior in Downfall should be representative of this group.
CPU and GPU Roles
The benchmark data reveals a clear pattern regarding which component dominates performance at different resolutions. The CPU’s immense power, as evidenced by its 92nd percentile ranking, suggests it is rarely the limiting factor. Instead, the GPU's workload scales with resolution, and the frame rates show this transition. At 1920x1080, the system achieves an average of 201 FPS on Low settings, which drops to 135 FPS on High and 84 FPS on Ultra. This scaling is typical of a GPU-bound scenario, where lower resolutions allow the CPU to feed frames quickly, but the GPU still caps the maximum output. The gap between Low and Ultra at 1080p is 117 FPS, showing a strong dependence on graphics settings.
Moving to 2560x1440, the frame rates drop across the board. Low settings yield 144 FPS, High produces 96 FPS, and Ultra falls to 60 FPS. The percentage drop from 1080p to 1440p is roughly 28% for Low, 29% for High, and 29% for Ultra. This consistent reduction indicates that the GPU is now the sole bottleneck, as the increased pixel count directly translates to lower performance. At 3840x2160, the trend continues, with Low settings producing 89 FPS, High producing 60 FPS, and Ultra dropping to 37 FPS. The scaling from 1440p to 4K shows a 38% drop for Low, a 37.5% drop for High, and a 38% drop for Ultra. These near-uniform percentage decreases across all settings and resolutions strongly imply that the RTX 5050 is the performance ceiling. The CPU's role is to ensure the GPU is fed with data, and its high single-threaded performance, as seen in its Cinebench R23 single-core score of 2228, means it can easily keep up even at 1080p.
Measured FPS Breakdown
At 1920x1080, the system shows strong performance across all presets. The Low preset achieves an average of 201 FPS, which is the highest recorded frame rate for this combination. Medium settings produce an average of 165 FPS, with a minimum of 140 FPS and a maximum of 189 FPS. High settings yield an average of 135 FPS, while Ultra settings, which are the most demanding, still manage a solid 84 FPS average. All presets at this resolution are far above the 60 FPS playable threshold, indicating that the system has significant headroom for high-refresh-rate monitors.
At 2560x1440, performance remains robust but shows the expected decline. The Low preset averages 144 FPS, while Medium settings produce 118 FPS on average, with a minimum of 100 FPS and a maximum of 135 FPS. High settings deliver 96 FPS on average. The Ultra preset is the only one that touches the playable threshold, with an average of exactly 60 FPS. This makes 1440p Ultra the boundary case; the system can run it, but there is no margin for error, and any demanding scene could potentially cause dips below 60 FPS.
At 3840x2160, the RTX 5050's limitations become evident. The Low preset averages 89 FPS, which is still comfortably playable. Medium settings produce an average of 73 FPS, with a minimum of 62 FPS and a maximum of 84 FPS, keeping just above the 60 FPS threshold. The High preset averages exactly 60 FPS, which is playable but leaves no headroom. The Ultra preset, however, is not viable, as it drops to an average of 37 FPS, which is far below the playable threshold and would result in a stuttery, unpleasant experience.
The Verdict
The data shows that this system can run Downfall at all three tested resolutions, but the quality settings vary significantly by resolution. According to the verdictByResolution data, at 3840x2160, the playable settings are High, Low, and Medium, with High being the best setting at an average of 60 FPS. This means 4K gaming is possible, but only at High settings or lower. At 2560x1440, all four settings are playable, including Ultra, which averages 60 FPS. This makes 1440p the sweet spot for this combination, as it allows for the highest visual quality while maintaining playable performance. At 1920x1080, all settings are playable, with Ultra averaging 84 FPS, which is well above the 60 FPS threshold and provides a smooth experience.
The verdict is clear: this system is capable of running Downfall at 60 FPS or higher, but the user must adjust settings based on their display resolution. For 4K displays, High is the maximum viable preset. For 1440p, Ultra is achievable, and for 1080p, Ultra provides a significant performance buffer. The system's overall rank of 2281 out of 3716 tested combos in this game places it in the lower-middle tier, which aligns with the GPU's mid-range positioning. It is not a top-tier performer, but it is also not inadequate, as it can meet the 60 FPS target at most settings.
FAQ
*Q: Can this PC run Downfall at 4K resolution?*
A: Yes, it can run at 4K, but only on High, Medium, or Low settings. The High preset achieves an average of 60 FPS, which meets the playable threshold, while Ultra drops to 37 FPS and is not playable.
Q: What is the best quality setting at 1440p?
A: The Ultra preset is the best quality setting at 2560x1440, achieving an average of 60 FPS. All other presets (Low, Medium, High) also run above 60 FPS, with Low averaging 144 FPS.
Q: How much faster is the CPU compared to its nearest rival?
A: The AMD Ryzen 7 9850X3D has an average benchmark score of 58386. Its closest rival, the Intel Xeon Platinum 8260M, scores 58323, which is 0.1% slower. The Intel Core i9-14900 is 0.5% slower, while the AMD Ryzen AI 9 HX 470 is 0.7% faster.
Q: Which component is the performance bottleneck in this system?
A: The benchmark data indicates the NVIDIA GeForce RTX 5050 is the bottleneck. Frame rates drop by roughly 28-38% when moving from 1080p to 1440p and from 1440p to 4K, respectively, across all settings. This uniform scaling is characteristic of a GPU-limited scenario.
Q: What is the highest FPS recorded for this combination?
A: The highest average FPS recorded is 201, achieved at 1920x1080 resolution with the Low settings preset.
Q: Is the RTX 5050's performance similar to any other GPU?
A: Yes, its average benchmark score of 21035 is very close to the AMD Radeon RX 5600 XT, which scores 20713 (1.6% lower), and the AMD Radeon RX Vega M GL, which scores 21153 (0.6% higher).
Best Settings per Resolution
For 3840x2160, the most demanding preset that stays at or above 60 FPS is High, which achieves an average of exactly 60 FPS. This is the recommended setting for 4K, as Medium (73 FPS) and Low (89 FPS) also work, but High offers the best visual quality. At 2560x1440, the Ultra preset is the best choice, averaging 60 FPS. This allows for maximum graphical fidelity while still meeting the playable threshold. At 1920x1080, the Ultra preset is also the best, but it performs much better, averaging 84 FPS. This provides a comfortable margin above 60 FPS and is the ideal setting for 1080p displays.
How This Combo Ranks
The combination of the AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 5050 ranks 2281 out of 3716 tested combos in Downfall. This places the system in the 61st percentile of all tested configurations, meaning roughly 61% of combinations perform better. This ranking is heavily influenced by the GPU's mid-range standing (66th percentile of all GPUs), as the CPU's high performance (92nd percentile) cannot compensate for the graphics card's limitations at higher resolutions. The rank suggests that while this system is perfectly capable of playing the game at 60 FPS on most settings, it is not a high-end setup for this title. Users seeking higher frame rates at 4K Ultra or more headroom at 1440p would need a more powerful GPU. The data shows a system that is balanced for 1080p and 1440p gaming, but which hits its ceiling at 4K High settings.