Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

76%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
174 FPS
Ultra 1080p Measured
73 FPS

1440p (2K / QHD)

Low 1440p Measured
124 FPS
Ultra 1440p Measured
52 FPS

4K (Ultra HD)

Low 4K Measured
77 FPS
Ultra 4K Measured
32 FPS
8.5ms Frame Time
13ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 58,386
Graphics Card
Required 27,400
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 32 52 63 77
1440p QHD 52 83 102 124
1080p Full HD 73 117 142 174

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 117
1920x1080 Low 174
1920x1080 Medium 142
1920x1080 Ultra 73
2560x1440 High 83
2560x1440 Low 124
2560x1440 Medium 102
2560x1440 Ultra 52
3840x2160 High 52
3840x2160 Low 77
3840x2160 Medium 63
3840x2160 Ultra 32

Performance Analysis: Downfall on Your System

Similar Performance Alternatives

The AMD Ryzen 7 9850X3D sits in a tightly contested performance band according to the database. Its average benchmark score of 58386 places it within a fraction of several competing processors. The closest match is the Intel Xeon Platinum 8260M, which scores 58323, a mere 0.1% difference. The AMD Ryzen AI 9 HX 470 trails by 0.7% with a score of 58826, while the Intel Xeon w5-2545 is 0.2% behind at 58504. The Intel Core i9-14900 rounds out the group at 58115, a 0.5% gap. In practical terms, any of these CPUs would deliver nearly identical frame pacing in Downfall, since the game rarely stresses all 16 threads of the Ryzen processor. The 92nd percentile ranking among all CPUs means the 9850X3D outperforms the vast majority of installed processors, but the specific rivals above show that the top end of the desktop market is extremely crowded.

For the NVIDIA GeForce RTX 2060, the situation is different. Its average benchmark score of 15290 places it at the 58th percentile of all GPUs. The nearest rivals are almost indistinguishable in raw compute: the GeForce GTX 580 matches at 15283 (0% delta), the AMD Radeon 680M scores 15270 (0.1% behind), the RTX 3050 OEM hits 15199 (0.6% behind), and the Radeon RX 7600 lands at 15171 (0.8% behind). This clustering suggests that for Downfall, swapping between these GPUs would produce within-noise differences in frame rate. The RTX 2060 does bring Turing architecture features like ray tracing cores and tensor cores, but the game itself does not leverage those capabilities. What matters is the raw rasterization throughput, and here the RTX 2060 is squarely in the middle of a five-way tie. The GTX 580 is a much older card, yet its score aligns closely, indicating that Downfall's rendering workload favors older, simpler GPU architectures that the RTX 2060 handles efficiently.

CPU and GPU Roles

The measured FPS data reveals a clear pattern: the GPU is the dominant constraint at higher resolutions, while the CPU becomes relatively more important at 1080p. At 3840x2160, the difference between Low and Ultra settings is dramatic. Low averages 77 FPS, Medium drops to 63 FPS, High falls to 52 FPS, and Ultra collapses to 32 FPS. This scaling indicates that the RTX 2060's fill rate and memory bandwidth (336.0 GB/s) are the limiting factors. The CPU, with its 8 cores and 16 threads, has ample headroom even at 4K. The Ryzen 7 9850X3D's single-thread performance, as shown by its Cinebench R23 single-core score of 2228, is more than sufficient to feed the GPU at any resolution.

At 2560x1440, the GPU still leads the performance curve. Low hits 124 FPS, Medium reaches 102 FPS, High drops to 83 FPS, and Ultra falls to 52 FPS. The gap between Low and Ultra is 72 FPS, nearly identical to the 45 FPS gap at 4K. This consistency suggests that the rendering pipeline is not CPU-bound at these settings. At 1920x1080, the picture shifts slightly. Low produces 174 FPS, Medium 142 FPS, High 117 FPS, and Ultra 73 FPS. The spread is larger in absolute terms, but the relative scaling remains similar. The CPU's role becomes more visible at 1080p because the GPU can render frames faster than the game logic can be processed. However, even at Ultra with 73 FPS, the system clears the 60 FPS threshold, indicating that the CPU is not a bottleneck in any scenario tested.

The data implies that for this horror title, the RTX 2060 is the component to upgrade first if higher settings are desired. The Ryzen 7 9850X3D is overkill for this workload, but it does ensure that frame time variance stays low, as evidenced by the Medium settings min/max values. At 4K Medium, the range is 54 to 73 FPS, a 19 FPS swing. At 1440p Medium, it is 86 to 117 FPS, a 31 FPS swing. At 1080p Medium, it is 121 to 164 FPS, a 43 FPS swing. These ranges show that the CPU keeps the frame pacing stable even when the GPU is working hard.

FAQ

Q: Can the AMD Ryzen 7 9850X3D and RTX 2060 combination run Downfall at 4K?

A: Yes, but only at Low or Medium settings. Low averages 77 FPS and Medium averages 63 FPS. High drops to 52 FPS and Ultra to 32 FPS, both below the 60 FPS playable threshold.

Q: What is the best preset at 1440p for this system?

A: High settings are the most demanding preset that stays above 60 FPS, averaging 83 FPS. Ultra falls to 52 FPS, which is not playable per the 60 FPS threshold.

Q: Does the RTX 2060 bottleneck the Ryzen 7 9850X3D in this game?

A: The data suggests yes at higher resolutions. The GPU's performance drops sharply from Low to Ultra at every resolution, while the CPU's high benchmark scores (Cinebench R23 multicore 22807) indicate it is not the limiting factor.

Q: Is Ultra settings possible at 1080p?

A: Yes. Ultra averages 73 FPS at 1920x1080, which clears the 60 FPS threshold. This is the only resolution where Ultra is playable.

Q: How does this combo rank compared to other tested systems?

A: The combination ranks 2937 out of 3716 tested combos for Downfall, placing it in the lower-middle portion of the database. This is primarily due to the RTX 2060's modest GPU score.

Q: What frame rate can be expected at 1440p Medium?

A: The average is 102 FPS, with a minimum of 86 FPS and a maximum of 117 FPS, providing a comfortable margin above the playable threshold.

The Verdict

The data is clear: this system can run Downfall, but the experience depends heavily on resolution and settings. At 3840x2160, the playable settings are Low and Medium, with Medium being the best choice at 63 FPS average. High and Ultra fall below 60 FPS, so they are not recommended. At 2560x1440, High becomes the best playable setting at 83 FPS, with Low and Medium also viable. Ultra remains unplayable at 52 FPS. At 1920x1080, every preset clears the threshold, and Ultra is the best setting at 73 FPS. The verdict by resolution confirms that the RTX 2060 is the limiting factor. The CPU, with its 92nd percentile ranking, never prevents the system from hitting 60 FPS. For users with a 1080p monitor, this is a fully playable combination at maximum settings. For 1440p, High is the sweet spot. For 4K, users must accept Medium or lower, which may compromise the horror atmosphere that relies on detailed textures and lighting.

How This Combo Ranks

The combination of the AMD Ryzen 7 9850X3D and NVIDIA GeForce RTX 2060 ranks 2937 out of 3716 tested combos in Downfall. This places the system in the 21st percentile of all tested configurations, meaning roughly 79% of tested combos perform better. The ranking is dragged down by the GPU, which sits at the 58th percentile among all GPUs. The CPU, by contrast, is a top-tier part at the 92nd percentile. This mismatch explains the ranking: the system has far more CPU headroom than the GPU can utilize. The nearest GPU rivals, such as the GTX 580 and Radeon 680M, would likely produce similar rankings when paired with this CPU. The rank suggests that for Downfall specifically, the RTX 2060 is the weak link. A stronger GPU paired with this CPU would move the combo significantly higher in the rankings, while a weaker CPU paired with the RTX 2060 would barely change the outcome.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Medium, with an average of 63 FPS. Low also clears the threshold at 77 FPS, but Medium offers better visual quality while still maintaining playability. At 2560x1440, High is the best choice, averaging 83 FPS. Low and Medium also work, but High provides the best balance of image quality and frame rate. At 1920x1080, Ultra is the most demanding playable preset, averaging 73 FPS. This is the only resolution where the full visual experience is available. The data shows a clear progression: as resolution decreases, the GPU has more headroom, allowing higher presets. The 60 FPS threshold is the defining line, and the system crosses it at every resolution with the appropriate settings.

Measured FPS Breakdown

At 3840x2160, the recorded data shows the following: Low settings average 77 FPS with no min/max reported. Medium averages 63 FPS, with a minimum of 54 and a maximum of 73. High averages 52 FPS with no min/max. Ultra averages 32 FPS with no min/max. The Medium preset provides the only min/max data at this resolution, indicating a 19 FPS variance during gameplay.

At 2560x1440, Low averages 124 FPS with no min/max. Medium averages 102 FPS, with a minimum of 86 and a maximum of 117. High averages 83 FPS with no min/max. Ultra averages 52 FPS with no min/max. The Medium preset again provides the only frame range data, showing a 31 FPS swing.

At 1920x1080, Low averages 174 FPS with no min/max. Medium averages 142 FPS, with a minimum of 121 and a maximum of 164. High averages 117 FPS with no min/max. Ultra averages 73 FPS with no min/max. The Medium preset at 1080p shows a 43 FPS variance, the largest of any recorded setting. The lack of min/max data for Low, High, and Ultra settings means the database only captures average performance for those presets, but the averages alone are sufficient to determine playability. The Medium preset's min/max values across all resolutions suggest that frame pacing is consistent, with no severe stutters or drops below the reported minimums.