Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 82 | 132 | 161 | 196 |
| 1440p QHD | 132 | 212 | 258 | 315 |
| 1080p Full HD | 185 | 296 | 361 | 442 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The AMD Ryzen 7 9800X3D paired with the NVIDIA GeForce RTX 4090 delivers an exceptionally high level of performance in Downfall, a Horror title released on 2016-02-28. The measured data shows that this combination not only handles the game at maximum settings across all tested resolutions but also provides substantial headroom above the 60 FPS playability threshold. The following analysis breaks down the benchmark results, which were collected as measured data across three resolutions and four quality presets.
Measured FPS Breakdown
The benchmark data for this combination includes average FPS figures for every resolution and preset, with minimum and maximum frame rates recorded only for the Medium preset. At 1920x1080, the performance is exceptionally high across the board. The Low preset achieves an average of 442 FPS, which is the highest recorded average in the entire dataset. Moving up the quality scale, the Medium preset averages 361 FPS, with a minimum of 307 FPS and a maximum of 416 FPS. The High preset delivers 296 FPS on average, while the most demanding Ultra preset still produces an average of 185 FPS. These figures indicate that at 1080p, the combination is largely unconstrained by the GPU, with frame rates reaching levels that exceed the refresh rates of virtually all consumer displays.
At 2560x1440, the performance scales down predictably but remains extremely strong. The Low preset averages 315 FPS, while Medium drops to 258 FPS, with a recorded minimum of 219 FPS and maximum of 297 FPS. The High preset produces an average of 212 FPS, and the Ultra preset maintains an average of 132 FPS. The gap between Low and Ultra at this resolution is approximately 183 FPS, which suggests that the GPU is beginning to feel the load of higher pixel counts, but the overall performance is still far beyond what would be considered demanding for this hardware.
At 3840x2160, also known as 4K, the performance remains impressive but shows the clearest impact of resolution scaling. The Low preset averages 196 FPS, which is still well above the 60 FPS threshold. Medium averages 161 FPS, with a minimum of 136 FPS and maximum of 185 FPS. High drops to 132 FPS, and Ultra settles at an average of 82 FPS. The minimum frame rate recorded at 4K Medium, 136 FPS, is still more than double the playability threshold, indicating that even transient drops do not approach problematic levels.
Best Settings per Resolution
Following the rule that the most demanding preset must stay at or above 60 FPS, the data shows that this combination can run Downfall at the maximum Ultra preset at every resolution tested. At 1920x1080, the Ultra preset achieves an average of 185 FPS, which is nearly three times the playability threshold. At 2560x1440, the Ultra preset maintains an average of 132 FPS, offering a comfortable margin over 60 FPS. At 3840x2160, the Ultra preset produces an average of 82 FPS, which clears the threshold by 22 FPS.
For users who prioritize frame rates over visual fidelity, the lower presets offer even higher performance. At 4K, the Low preset averages 196 FPS, and the Medium preset averages 161 FPS. However, since the Ultra preset at 4K already delivers 82 FPS on average, there is no need to compromise on settings to achieve playability. The data confirms that the best settings per resolution are simply the highest available, with the Ultra preset being the recommended choice for all three resolutions.
CPU and GPU Roles
The scaling between resolutions and presets provides insight into which component limits performance in Downfall. At 1920x1080, the difference between Low and Ultra is 257 FPS (from 442 to 185), which is a substantial drop. This indicates that the GPU is still the primary driver of performance, as lower resolutions put less strain on the graphics hardware, allowing the CPU to push frame rates higher. However, the CPU, an AMD Ryzen 7 9800X3D with 8 cores and 16 threads, has a benchmark percentile of 87 and an average benchmark score of 39768, which suggests it is more than capable of feeding the GPU at these lower resolutions.
At 2560x1440, the difference between Low and Ultra narrows to 183 FPS (from 315 to 132). This reduction in the spread compared to 1080p suggests that the GPU is becoming more of a limiting factor as pixel count increases. At 3840x2160, the spread between Low and Ultra is 114 FPS (from 196 to 82), which is the smallest gap across all resolutions. This trend indicates that at 4K, the GPU, an NVIDIA GeForce RTX 4090 with 16384 shading units and a boost clock of 2520 MHz, is the dominant constraint. The RTX 4090 has a percentile rank of 88 among all GPUs and an average benchmark score of 60347, confirming its position as a top-tier graphics card.
The data also shows that the CPU's role diminishes as resolution increases. At 1080p, the high frame rates of 442 FPS on Low suggest that the CPU is able to process frames quickly enough to avoid becoming a bottleneck. At 4K, the frame rates are lower across all presets, which is consistent with the GPU handling a much larger number of pixels. The RTX 4090's memory bandwidth of 1.01 TB/s and 24 GB of GDDR6X memory are likely contributing factors to its ability to maintain high frame rates even at 4K. Overall, the CPU and GPU roles are well balanced, with the GPU becoming the primary limiter at higher resolutions, while the CPU provides sufficient headroom at lower resolutions.
FAQ
*Q: Can this PC run Downfall at 4K with maximum settings?*
A: Yes, the data shows that at 3840x2160 with the Ultra preset, the combination achieves an average of 82 FPS, which is above the 60 FPS playability threshold.
Q: What is the highest average FPS recorded for this combination?
A: The highest average FPS is 442, recorded at 1920x1080 with the Low preset.
Q: How does the performance at 2560x1440 compare to 1920x1080?
A: At 2560x1440, the Ultra preset averages 132 FPS, while at 1920x1080, the Ultra preset averages 185 FPS, representing a difference of 53 FPS.
Q: Are there any frame rate drops below 60 FPS in the recorded data?
A: No, the lowest recorded minimum FPS is 136, which occurs at 3840x2160 with the Medium preset. All other data points are above this value.
Q: What is the least demanding preset that still achieves over 100 FPS at 4K?
A: The High preset at 3840x2160 achieves an average of 132 FPS, while the Medium preset achieves 161 FPS, and the Low preset achieves 196 FPS.
Q: Does the GPU or CPU have a higher percentile rank among all hardware?
A: The GPU has a percentile rank of 88, while the CPU has a percentile rank of 87, indicating they are closely matched in their respective categories.
The Verdict
The benchmark results are clear: this PC can run Downfall exceptionally well at all tested resolutions and presets. According to the verdict by resolution, all four settings are playable at each resolution, with the best settings being Ultra in every case. At 3840x2160, the Ultra preset achieves an average of 82 FPS, which clears the 60 FPS threshold. At 2560x1440, the Ultra preset averages 132 FPS, and at 1920x1080, it averages 185 FPS. The minimum recorded frame rate across all measurements is 136 FPS, which occurs at 4K Medium, meaning there are no drops below the playability threshold. This combination not only runs the game but does so with significant headroom, making it suitable for high-refresh-rate displays even at 4K.
How This Combo Ranks
Among all tested hardware combinations in the benchmark database, this pairing of the AMD Ryzen 7 9800X3D and NVIDIA GeForce RTX 4090 ranks 109th out of 3716 combos for Downfall. This places it in the top 3% of all tested systems, reflecting its high level of performance. The rank is consistent with the individual strengths of the components, as the CPU and GPU both have high percentile ranks of 87 and 88, respectively. The combination's performance is sufficient to handle the most demanding settings at 4K, which reflects its overall capability in this title.
Similar Performance Alternatives
Based on the nearest rivals for the CPU and GPU, there are several hardware combinations that would behave similarly in Downfall. For the CPU, the AMD Ryzen 7 PRO 8840HS has an average benchmark score of 39603, which is 0.4% lower than the Ryzen 7 9800X3D's score of 39768. The AMD Ryzen AI 9 365 scores 40048, which is 0.7% higher, and the AMD Ryzen AI 7 450 scores 39485, which is 0.7% lower. The AMD Ryzen 7 7700 scores 40081, which is 0.8% higher. These processors would likely produce similar frame rates, though the differences are minimal.
For the GPU, the Intel Arc Pro A60 has an average score of 60326, which is 0% different from the RTX 4090's score of 60347. The AMD Radeon Pro Vega 48 scores 60140, which is 0.3% lower, and the AMD Radeon Pro W6600M scores 61896, which is 2.5% higher. The AMD Radeon PRO V710 scores 58657, which is 2.9% lower. These GPUs would provide comparable performance, with the W6600M being slightly faster and the V710 being slightly slower. Users with these alternative components could expect frame rates within a few percentage points of those recorded for the Ryzen 7 9800X3D and RTX 4090 combination.