Instant compatibility check with FPS benchmarks and optimization tips
Downfall
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 39 | 63 | 76 | 93 |
| 1440p QHD | 63 | 101 | 123 | 150 |
| 1080p Full HD | 88 | 141 | 172 | 210 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Downfall on Your System
The AMD Ryzen 7 9700F and AMD Radeon RX 9060 pairing delivers a clearly playable experience in Downfall at 4K, 1440p, and 1080p, though the ceiling of what is achievable depends heavily on resolution. The data shows that at 3840x2160, the combo reaches an average of 63 FPS on High settings, while at 2560x1440 it manages 63 FPS on Ultra, and at 1920x1080 it hits 88 FPS on Ultra. These results place the system in the 2185th position out of 3716 tested combinations for this title, indicating a mid-pack standing among all hardware pairings.
Similar Performance Alternatives
Benchmark results place the AMD Ryzen 7 9700F in close company with several high-end processors. The CPU’s average benchmark score of 69996 sits within a narrow band of its nearest rivals. The AMD Ryzen 9 7940HX scores 69875, a delta of 0.2 percent, meaning the 9700F is effectively identical in overall synthetic performance. The Intel Core i7-14700KF comes in at 70163, which is 0.2 percent higher than the 9700F, again a negligible difference. The AMD Ryzen 9 7950X trails slightly with 69515, putting the 9700F 0.7 percent ahead. Finally, the Intel Core i7-14700K scores 69355, which the 9700F beats by 0.9 percent. For Downfall, any of these CPUs would deliver near-identical frame rates, so users upgrading from one of these chips to the 9700F would see no meaningful change in this game’s performance.
On the graphics side, the AMD Radeon RX 9060 posts an average benchmark score of 16014, with its closest rival being the NVIDIA GeForce RTX 3060 Ti at 16129, a difference of -0.7 percent (the RX 9060 is slightly slower). The AMD Radeon R9 370X scores 15862, which the RX 9060 beats by 1 percent. The AMD Radeon RX 7700 also scores 15852, again 1 percent behind the RX 9060. The AMD Radeon Pro W5500 is further back at 15679, a 2.1 percent gap. In practical terms for Downfall, the RX 9060’s performance is interchangeable with the RTX 3060 Ti, and marginally faster than the R9 370X, RX 7700, and Pro W5500. Gamers moving from any of those cards to the RX 9060 would see only single-digit percentage changes in frame rates.
The CPU’s percentile rank of 94 among all CPUs means it outperforms the vast majority of processors, while the GPU’s percentile of 59 places it just above the median. This combination suggests a system where the processor has ample headroom, and the graphics card is the primary limiter in most scenarios, which aligns with the measured FPS scaling across resolutions and settings.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, which delivers an average of 63 FPS. The data shows that Medium also remains playable at 76 FPS, and Low runs at 93 FPS. However, Ultra drops to 39 FPS, which falls below the playable threshold of 60 FPS. Therefore, High is the recommended setting for 4K, as it provides the best visual quality while maintaining a playable frame rate. The gap between High and Ultra is substantial, indicating that Ultra’s additional graphical load is too heavy for this GPU at this resolution.
At 2560x1440, the situation improves. Ultra settings achieve an average of 63 FPS, exactly at the playable threshold, making it the best settings choice. High runs at 101 FPS, Medium at 123 FPS, and Low at 150 FPS, all comfortably above 60 FPS. The fact that Ultra hits 63 FPS at 1440p mirrors the High preset’s performance at 4K, suggesting that the resolution scaling is nearly linear for this game. For users prioritizing maximum visual fidelity, Ultra is viable here, though it leaves little headroom for dips below 60 FPS in demanding scenes.
At 1920x1080, the combo has no trouble. Ultra settings deliver an average of 88 FPS, which is the best playable setting. High runs at 141 FPS, Medium at 172 FPS, and Low at 210 FPS. The 88 FPS on Ultra provides a smooth experience with room to spare, and even the most demanding preset stays well above the 60 FPS threshold. This resolution is where the system is most comfortable, with all settings playable and the GPU clearly not bottlenecked by the CPU.
Across all resolutions, the pattern is consistent: the RX 9060 can handle High at 4K, Ultra at 1440p, and Ultra at 1080p, all while maintaining at least 63 FPS. The only unplayable configuration is 4K Ultra at 39 FPS.
CPU and GPU Roles
The data reveals a clear division of labor between the CPU and GPU in Downfall. At 3840x2160, moving from Low (93 FPS) to Medium (76 FPS) to High (63 FPS) to Ultra (39 FPS) shows a steady decline, with the biggest drop occurring between High and Ultra, a 24 FPS difference. This indicates that at 4K, the GPU is the dominant factor, as each increase in graphical settings directly taxes the renderer. The CPU, with its high percentile rank, is unlikely to be the bottleneck here.
At 2560x1440, the scaling is less steep: Low (150 FPS) to Medium (123 FPS) to High (101 FPS) to Ultra (63 FPS). The drop from High to Ultra is 38 FPS, which is larger than at 4K (24 FPS), but the absolute frame rates are higher. This suggests that at 1440p, the GPU is still the primary constraint, but the CPU has more influence because the overall load is lower. The fact that Ultra at 1440p (63 FPS) matches High at 4K (63 FPS) implies that the GPU is hitting a similar performance ceiling in both cases, regardless of resolution.
At 1920x1080, the scaling reveals a different story. Low (210 FPS) to Medium (172 FPS) to High (141 FPS) to Ultra (88 FPS) shows steep declines, but the absolute numbers are high enough that the CPU may start to matter. The jump from High to Ultra is 53 FPS, the largest drop across any resolution, which indicates that Ultra at 1080p is particularly demanding on the GPU. However, the fact that Ultra still achieves 88 FPS suggests the CPU is not limiting; if it were, the frame rates would plateau regardless of settings.
Comparing across resolutions, going from 1080p Ultra (88 FPS) to 1440p Ultra (63 FPS) is a 25 FPS drop, and then to 4K Ultra (39 FPS) is another 24 FPS drop. This consistent scaling points to the GPU being the bottleneck at higher resolutions, as the CPU’s performance is unchanged. The CPU’s job is to feed the GPU, and given its strong benchmark scores and 94th percentile ranking, it does so without issue. The GPU, with its 59th percentile, is the limiting component, especially at 4K where even High settings only reach 63 FPS.
In summary, at 1080p the system is GPU-bound but with enough CPU headroom to push high frame rates. At 1440p, the GPU remains the main constraint, and at 4K, the GPU is severely taxed, making settings choices critical.
FAQ
*Q: Can this system run Downfall at 4K with maximum settings?*
A: No. At 3840x2160 with Ultra settings, the average FPS is 39, which is below the 60 FPS playable threshold. The best playable setting at 4K is High, which achieves 63 FPS.
Q: What is the highest quality preset that maintains 60 FPS at 1440p?
A: At 2560x1440, Ultra settings deliver an average of 63 FPS, making it the highest playable preset. High (101 FPS), Medium (123 FPS), and Low (150 FPS) are also above 60 FPS.
Q: How does the RX 9060 compare to the RTX 3060 Ti in this game?
A: Based on average benchmark scores, the RX 9060 (16014) is 0.7 percent slower than the RTX 3060 Ti (16129). In Downfall, this translates to nearly identical frame rates, so users would not notice a practical difference.
Q: Is the Ryzen 7 9700F or the RX 9060 more important for performance at 1080p?
A: At 1920x1080, the GPU is the primary factor, as seen by the large FPS drops when increasing settings from Low (210 FPS) to Ultra (88 FPS). The CPU’s high benchmark score and 94th percentile ranking indicate it is not a bottleneck at this resolution.
*Q: What is the system’s overall ranking among tested combos for Downfall?*
A: The combo ranks 2185 out of 3716 tested combinations, placing it in the middle of the pack. This reflects that while the system is fully playable at all resolutions (except 4K Ultra), many other hardware pairings achieve higher frame rates.
Q: Does the system maintain 60 FPS on all settings at 1080p?
A: Yes. At 1920x1080, the lowest average FPS is 88 on Ultra settings, which is well above the 60 FPS threshold. Low (210 FPS), Medium (172 FPS), and High (141 FPS) all exceed 60 FPS.
Measured FPS Breakdown
The measured FPS data provides a complete picture of performance across resolutions and settings. At 3840x2160, the combo achieves an average of 93 FPS on Low settings, with no min or max values recorded. On Medium, the average is 76 FPS, with a minimum of 65 FPS and a maximum of 88 FPS, indicating a tight range. High settings average 63 FPS, again without min or max values. Ultra is the outlier, dropping to 39 FPS, which is below the playable threshold. The Medium preset’s min FPS of 65 is notable because it stays above 60 FPS even in the worst case, while High’s average of 63 FPS suggests occasional dips below 60 are possible, though the data does not provide exact min values.
At 2560x1440, Low settings average 150 FPS, with no min or max recorded. Medium averages 123 FPS, with a min of 104 FPS and max of 141 FPS. High averages 101 FPS, and Ultra averages 63 FPS. The Medium preset’s min of 104 FPS shows strong consistency, and even Ultra’s average of 63 FPS leaves little margin, but it is still playable. The lack of min/max data for High and Ultra makes it difficult to assess worst-case dips, but the averages are solid.
At 1920x1080, Low settings hit 210 FPS on average. Medium averages 172 FPS, with a min of 146 FPS and max of 198 FPS. High averages 141 FPS, and Ultra averages 88 FPS. The Medium preset’s min of 146 FPS is excellent, and even Ultra’s 88 FPS average provides a comfortable cushion above 60 FPS. Notably, the min FPS values recorded for Medium at each resolution (65 at 4K, 104 at 1440p, 146 at 1080p) show that the system never dips below 60 FPS in those configurations, reinforcing the playability verdict.
The data also shows a consistent pattern of FPS scaling: at 4K, the difference between Low and Ultra is 54 FPS (93 to 39); at 1440p, it is 87 FPS (150 to 63); and at 1080p, it is 122 FPS (210 to 88). This widening gap at lower resolutions indicates that the GPU has more headroom when pixel count decreases, but the CPU remains capable of keeping up, as evidenced by the high frame rates at 1080p.
How This Combo Ranks
In the aggregate of all tested hardware combinations for Downfall, the AMD Ryzen 7 9700F and AMD Radeon RX 9060 pairing ranks 2185 out of 3716 combos. This places the system in the 58.8th percentile of all tested setups, meaning roughly 41 percent of combinations perform better and 59 percent perform worse. Given that the CPU ranks in the 94th percentile among all CPUs and the GPU ranks in the 59th percentile among all GPUs, the combo’s overall rank is dragged down by the graphics card. The CPU is clearly a high-end part that is not the limiting factor, while the GPU is only slightly above average.
The rank of 2185 suggests that while this system delivers playable performance in Downfall at most settings, it is not a top-tier configuration for this title. Many other combos, likely featuring higher-end GPUs, achieve higher frame rates, especially at 4K Ultra. However, the fact that the system can run 4K High at 63 FPS and 1440p Ultra at 63 FPS means it is still a capable setup for horror game enthusiasts who prioritize visual quality over maximum frame rates. The data indicates that the RX 9060 is the bottleneck, and pairing the Ryzen 7 9700F with a stronger GPU would push the combo significantly higher in the rankings. Conversely, the CPU’s strength ensures that no combination of settings in Downfall will be CPU-limited, allowing the GPU to operate at its full potential.