Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Downfall
Horror 2016

Downfall

76%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
192 FPS
Ultra 1080p Measured
80 FPS

1440p (2K / QHD)

Low 1440p Measured
137 FPS
Ultra 1440p Measured
57 FPS

4K (Ultra HD)

Low 4K Measured
85 FPS
Ultra 4K Measured
36 FPS
7.8ms Frame Time
12ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,515
Your CPU 69,996
Graphics Card
Required 27,400
Your GPU 15,171

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 36 57 70 85
1440p QHD 57 92 112 137
1080p Full HD 80 129 157 192

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 129
1920x1080 Low 192
1920x1080 Medium 157
1920x1080 Ultra 80
2560x1440 High 92
2560x1440 Low 137
2560x1440 Medium 112
2560x1440 Ultra 57
3840x2160 High 57
3840x2160 Low 85
3840x2160 Medium 70
3840x2160 Ultra 36

Performance Analysis: Downfall on Your System

The AMD Ryzen 7 9700F and AMD Radeon RX 7600 combination delivers a surprisingly robust experience in Downfall, a horror title with demanding visual presets. The data shows that this pairing can hold 60 FPS at 4K with the right settings, while 1440p and 1080p allow for progressively higher quality presets. Benchmark results indicate that the RX 7600, with its 8 GB of GDDR6 memory and RDNA 3.0 architecture, is the primary driver at higher resolutions, while the Ryzen 7 9700F’s Zen 5 architecture ensures the CPU never becomes a bottleneck at lower settings. Below is a detailed breakdown of measured performance across all tested configurations.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Medium, which delivers an average of 70 FPS with a minimum of 59 FPS and a maximum of 80 FPS. This is the sweet spot for 4K gaming on this hardware. The data shows that dropping to Low increases the average to 85 FPS, but Medium offers a better balance between visual fidelity and frame rate, staying above the 60 FPS threshold for the vast majority of the run. High settings at 4K fall short, averaging 57 FPS, which is below the playable threshold. Ultra at 4K is not viable, with an average of just 36 FPS.

Moving to 2560x1440, the best settings rise to High, which produces an average of 92 FPS. This is a substantial improvement over the 4K Medium result, showing that the resolution drop from 2160p to 1440p grants enough headroom for higher quality. The High preset at 1440p stays well above 60 FPS, with no minimum recorded below the playable threshold. Low settings at this resolution average 137 FPS, while Medium averages 112 FPS with a minimum of 95 FPS and a maximum of 129 FPS. Ultra at 1440p averages 57 FPS, just below the 60 FPS mark, so High is the clear recommendation.

At 1920x1080, the hardware fully flexes its muscles. The best settings are Ultra, which averages 80 FPS. This is a significant achievement, as Ultra at 1080p represents the highest quality preset available in the game. The data shows that High averages 129 FPS, Medium averages 157 FPS with a minimum of 133 FPS and a maximum of 180 FPS, and Low averages 192 FPS. All presets at 1080p clear the 60 FPS threshold with comfortable margins, making this resolution the most versatile for players who prioritize frame rate or visual quality.

CPU and GPU Roles

The benchmark data reveals a clear division of labor between the AMD Ryzen 7 9700F and the AMD Radeon RX 7600. At 3840x2160, the GPU is overwhelmingly the limiting factor. The scaling from Low to Medium at 4K shows an increase in average FPS from 85 to 70, a drop of 15 FPS (approximately 17.6% reduction), while Medium to High drops from 70 to 57 (about 18.6% reduction). This steep decline as settings rise indicates that the RX 7600’s 8 GB memory buffer and 128-bit bus are being saturated at this resolution. The CPU, with its 8 cores and 16 threads, has ample headroom, as evidenced by the fact that the Ryzen 7 9700F’s PassMark single-thread score of 4691 and multithread score of 36470 are far above what a 2016 horror title would demand.

At 2560x1440, the balance shifts slightly. The scaling from Low to Medium at 1440p shows a drop from 137 to 112 FPS (about 18.2% reduction), and Medium to High drops from 112 to 92 FPS (about 17.9% reduction). These percentages are nearly identical to the 4K scaling, suggesting that the GPU is still the dominant factor. However, the absolute frame rates are much higher, indicating that the RX 7600 has more headroom at this resolution. The CPU’s role becomes more apparent at 1080p, where the frame rates are high enough that any CPU limitation would show. At 1920x1080, the scaling from Low to Medium is from 192 to 157 FPS (about 18.2% reduction), and Medium to High from 157 to 129 FPS (about 17.8% reduction). These percentages remain consistent, but the absolute values—192 FPS at Low—suggest that even the fastest settings are not CPU-bound.

The data indicates that the GPU is the primary constraint across all resolutions, with the CPU providing consistent support. The Ryzen 7 9700F’s boost clock of 5.50 GHz and 32 MB of shared L3 cache ensure that frame pacing remains stable, even when the GPU is pushed to its limits at 4K Ultra. At 1080p Low, where the GPU is least stressed, the CPU’s single-thread performance becomes more relevant, but the measured 192 FPS shows no signs of a CPU bottleneck.

Measured FPS Breakdown

3840x2160

  • Low: Average 85 FPS. No minimum or maximum recorded.
  • Medium: Average 70 FPS, minimum 59 FPS, maximum 80 FPS. This is the only 4K preset with a reported minimum, and it stays just above the 60 FPS threshold.
  • High: Average 57 FPS. No minimum or maximum recorded.
  • Ultra: Average 36 FPS. No minimum or maximum recorded.

At 4K, the drop from Medium to High is 13 FPS (from 70 to 57, a 18.6% reduction), which pushes the average below the playable threshold. The jump from High to Ultra is even more severe, with a 21 FPS drop (from 57 to 36, a 36.8% reduction), showing that Ultra at 4K is not meant for this class of GPU.

2560x1440

  • Low: Average 137 FPS. No minimum or maximum recorded.
  • Medium: Average 112 FPS, minimum 95 FPS, maximum 129 FPS.
  • High: Average 92 FPS. No minimum or maximum recorded.
  • Ultra: Average 57 FPS. No minimum or maximum recorded.

At 1440p, the Medium preset has a minimum of 95 FPS, which is far above the 60 FPS threshold. The High preset averages 92 FPS, and the drop from Medium to High is 20 FPS (from 112 to 92, a 17.9% reduction). Ultra at 1440p averages 57 FPS, which is just 3 FPS below the playable mark, making it a borderline case that most players would avoid.

1920x1080

  • Low: Average 192 FPS. No minimum or maximum recorded.
  • Medium: Average 157 FPS, minimum 133 FPS, maximum 180 FPS.
  • High: Average 129 FPS. No minimum or maximum recorded.
  • Ultra: Average 80 FPS. No minimum or maximum recorded.

At 1080p, all presets are comfortably playable. The Medium preset shows a minimum of 133 FPS, which is more than double the playable threshold. The drop from Low to Medium is 35 FPS (from 192 to 157, a 18.2% reduction), and from Medium to High is 28 FPS (from 157 to 129, a 17.8% reduction). Ultra at 1080p averages 80 FPS, which is a 49 FPS drop from High (from 129 to 80, a 38.0% reduction), but still well above 60 FPS.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 7 9700F provide context for its CPU performance. The AMD Ryzen 9 7940HX has an average benchmark score of 69875, which is 0.2% lower than the Ryzen 7 9700F’s 69996. The Intel Core i7-14700KF scores 70163, 0.2% higher. The AMD Ryzen 9 7950X scores 69515, 0.7% lower, and the Intel Core i7-14700K scores 69355, 0.9% lower. These small deltas mean that in Downfall, swapping the Ryzen 7 9700F for any of these CPUs would yield nearly identical frame rates, especially at 4K where the GPU is the bottleneck. At 1080p Low, the differences might be a few FPS, but the data shows that the CPU is not the limiting factor in this game.

For the AMD Radeon RX 7600, the nearest rivals are the NVIDIA GeForce RTX 3050 OEM, which scores 15199 in the average benchmark, 0.2% lower than the RX 7600’s 15171. The AMD Radeon Pro 560X scores 15082, 0.6% higher, the AMD Radeon 680M scores 15270, 0.7% lower, and the NVIDIA GeForce GTX 660 Ti scores 15063, 0.7% higher. In practical terms, these GPUs would perform almost identically to the RX 7600 in Downfall. The RTX 3050 OEM, given its similar PassMark G3D score of 16634 for the RX 7600, would likely produce the same measured FPS at each resolution and preset. The Radeon 680M, being an integrated GPU, might have different memory bandwidth characteristics, but its benchmark score suggests comparable raw performance.

It is important to note that the RX 7600’s percentile ranking against all GPUs is 57, meaning it sits in the middle of the pack. The Ryzen 7 9700F, by contrast, ranks in the 94 percentile against all CPUs. This disparity reinforces the conclusion that the GPU is the weaker link in this combo for Downfall.

How This Combo Ranks

This specific combination of AMD Ryzen 7 9700F and AMD Radeon RX 7600 ranks 2566 out of 3716 tested combos in Downfall. This places it in the lower half of all tested systems, but the rank is heavily influenced by the GPU. The 4K Ultra result of 36 FPS and the 1440p Ultra result of 57 FPS drag the combo down, as many higher-end GPUs would push those numbers above 60 FPS. However, the rank also reflects the fact that the combo handles 1080p Ultra at 80 FPS, which is a respectable result.

The rank of 2566 out of 3716 means that roughly 69% of tested combos perform better than this one. That is not a flattering position, but it is a direct consequence of the RX 7600’s mid-range standing. The CPU’s high percentile (94) does not compensate for the GPU’s lower percentile (57) in a game that is heavily GPU-bound. If paired with a stronger GPU, the Ryzen 7 9700F would likely push this combo much higher in the rankings, but as configured, the RX 7600 caps the overall performance.

The Verdict

The data shows that this PC can run Downfall with clear playability at all three tested resolutions, provided the right settings are chosen. At 3840x2160, the playable settings are Low (average 85 FPS) and Medium (average 70 FPS). The best playable setting is Medium, which delivers 70 FPS on average and stays above the 60 FPS threshold for the majority of the run, with a minimum of 59 FPS that briefly dips below but is still close. High and Ultra at 4K are not recommended, as they average 57 FPS and 36 FPS, respectively.

At 2560x1440, the playable settings are High (average 92 FPS), Low (average 137 FPS), and Medium (average 112 FPS). The best playable setting is High, which provides 92 FPS on average and is well above the 60 FPS threshold. Ultra at 1440p averages 57 FPS, just below the playable mark, so it should be avoided unless the player tolerates occasional dips.

At 1920x1080, all four presets are playable: Ultra (average 80 FPS), High (average 129 FPS), Medium (average 157 FPS), and Low (average 192 FPS). The best playable setting is Ultra, which averages 80 FPS and provides the highest visual quality while maintaining a comfortable margin above 60 FPS.

In summary, this combination of AMD Ryzen 7 9700F and AMD Radeon RX 7600 is a capable mid-range system for Downfall. It shines at 1080p, where it can run Ultra settings smoothly, and it holds its own at 1440p with High settings. At 4K, it requires a compromise down to Medium settings, but that is still playable. The data makes it clear that the GPU is the limiting factor, while the CPU has ample headroom for this title. Players seeking higher 4K performance would need to upgrade the GPU, while the CPU would remain sufficient for many years.